MACHENIKE G1 Wireless Gaming Controller User Manual

Product Overview

The MACHENIKE G1 Wireless Gaming Controller is a versatile gamepad designed for a superior gaming experience across multiple platforms. It features a dual 1000Hz polling rate, Quad Hall Sensor System for joysticks and triggers, and triple-mode connectivity (2.4G wireless, Bluetooth, and USB-C wired). The controller is equipped with durable ABXY buttons, a laser-etched grip for comfort, and dual motor vibration for immersive feedback. It supports PC, Nintendo Switch, iOS, and Android devices.

Package Contents

Please check the package contents to ensure all items are present:

• 1 x MACHENIKE G1 Gamepad
• 1 x USB Charging Cable
• 1 x 2.4G Wireless Receiver
• 1 x User Manual (this document)
• 1 x Warranty Card
• 1 x Certificate of Conformity

Controller Layout

Setup & Connectivity

Before establishing a wireless connection, switch to the corresponding device mode using the combination keys.

Basic Connection Modes

2.4G Wireless Connection Steps

1. While the controller is off, press and hold the [B] + [HOME] combination keys until the indicator light flashes rapidly, indicating pairing mode.
2. Insert the 2.4G receiver into the USB port of the device you wish to connect. The receiver will enter a waiting state.
3. Bring the controller close to the receiver. It will automatically pair, and a vibration will confirm success. The controller indicator light will remain solid.

Bluetooth Connection Steps (PC/Mobile/Switch/Android)

1. While the controller is off, press and hold the corresponding combination key ([X] + [HOME] for PC/Mobile, [Y] + [HOME] for Switch, [A] + [HOME] for Android) until the indicator light flashes rapidly, indicating pairing mode.
2. On your device, open Bluetooth settings and add a new Bluetooth device.
3. Select the appropriate device name (e.g., "Xbox Wireless Controller" for PC/Mobile, "Pro Controller" for Switch, "MACHENIKE G1" for Android) from the list of found Bluetooth devices. The indicator light will remain solid upon successful pairing.

Nintendo Switch Mode Specifics

• When in Switch mode, you can press and hold the [FN] + [A] combination keys for three seconds to switch to the Switch button layout. The controller will vibrate once to confirm.
• Supports HOME button wake-up for the controller and remote host wake-up function.
• Note: For wired connection to Switch, enable the wired controller function in Switch settings and connect the Switch host to the official multi-function dock.

Wired Connection

• When connecting to a PC via wired connection, you can press and hold [ - ] + [ + ] for 3 seconds to manually switch between PC mode, Switch mode, or Dinput mode.
• With the controller off, connect it directly to your device using the provided USB-C cable.

Operation

Function Combination Key Operations

*When using combination keys, please follow the button sequence above to avoid issues.

Joystick and Trigger Calibration

*During calibration, gently rotate the joysticks and lightly press the triggers all the way down. Failure to do so may result in incomplete joystick/trigger input.

1. While the controller is off, press [BACK] + [B] + [HOME] simultaneously to enter calibration mode. The indicator lights will flash alternately.
2. Joystick Calibration: Slowly rotate both the left and right joysticks to their full extent, completing at least three full rotations.
3. Trigger Calibration: Press both the left and right triggers all the way down 3 times each.
4. Finally, press the [START] button once to complete calibration. The controller will automatically power off.

TURBO Function

The TURBO function supports A/B/X/Y/LB/LT/RB/RT buttons.

• Manual TURBO: Press [TURBO] + [A] (or other supported button) to enable manual TURBO for that button. You must hold the button down for it to activate.
• Automatic TURBO: After enabling manual TURBO, press [TURBO] + [A] (or other supported button) again. The button will now have automatic TURBO. Press [TURBO] + [A] (or other supported button) a third time to disable the rapid-fire function.

*When a button has TURBO enabled, its indicator light will flash continuously.

APP-Keylinker 2.0 Support

The Keylinker 2.0 app allows for more customized settings for your controller.

App Download (Android/HarmonyOS/iOS)

• Download the app and related firmware updates from the MACHENIKE official website: https://machenike.com/shoubing/download
• Alternatively, scan the QR code below with your browser to enter the download page.
• For HarmonyOS systems, please download the Android version.

App Connection Steps

1. After correctly installing the Keylinker app on your phone, confirm any permission requests that appear upon first launch.
2. Start the controller in any mode. The app will detect "G1_APP" on the Keylinker app homepage.
3. Click "G1_APP" to connect and enter the customization interface.

*Note: This function does not require the controller to be connected to the phone via Bluetooth. Simply open Keylinker as described above to modify controller settings.

Battery Information

Power Display

To display the current battery level, press [BACK] + [TURBO] simultaneously.

Battery Level Indicators

The indicator lights will show the remaining battery level:

• <25%
• ≤50%
• ≤75%
• ≤100%

Charging

• During charging, all four indicator lights will be solid.
• When fully charged, all four indicator lights will turn off.

Troubleshooting

Resetting the Controller

If the controller becomes unresponsive or is not recognized during operation or connection, you can try the following:

• Disconnect and reconnect the USB cable.
• Manually select the appropriate working mode.
• If the issue persists, press and hold the [HOME] button for 10 seconds.
• Check the compatibility between your operating system/device and the controller.
• If the problem still cannot be resolved, please contact customer service.

Specifications

Environmental Compliance

MACHENIKE promotes environmental protection and low-carbon consumption. When this product is no longer needed, users are advised to comply with national regulations for the recycling and disposal of waste electrical and electronic products. Please hand it over to a qualified recycling facility to reduce resource waste and protect the environment.

Hazardous Substances in Products

This table is prepared in accordance with SJ/T 11364 regulations.

• O: Indicates that the concentration of the hazardous substance in all homogeneous materials of this part is below the limit specified in GB/T 26572.
• X: Indicates that the concentration of the hazardous substance in at least one homogeneous material of this part exceeds the limit specified in GB/T 26572.

Due to current international and domestic industry technical limitations, a small number of components in this product contain restricted substances. During the environmental protection use period, the product will not release or precipitate restricted substances that affect consumer health. Please use with confidence.

Printed Circuit Board Assembly: Includes printed circuit boards and their components, electronic components, etc. Depending on the product model, your purchased product may not contain all the listed components.

In the People's Republic of China, electronic and electrical products sold must be marked with the following symbol. The number inside the symbol represents the environmental protection use period of the product under normal operating conditions.

Maintenance

To ensure the longevity and optimal performance of your MACHENIKE G1 controller, please follow these general maintenance guidelines:

• Keep the controller clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid exposing the controller to extreme temperatures, humidity, or direct sunlight.
• Do not drop or subject the controller to strong impacts.
• Store the controller in a safe place when not in use to prevent accidental damage.
• Ensure the charging cable is connected properly to prevent damage to the port.

User Tips

• Dongle Compatibility: The included 2.4G USB dongle is proprietary to the G1 controller. While the controller is broadly compatible, ensure you use the correct dongle for 2.4G wireless connection.
• Motion Sensor/Gyroscope: The G1 controller features a motion sensor (gyroscope) which is essential for games requiring motion controls, such as some Nintendo Switch titles.
• Xbox Compatibility: Please note that the MACHENIKE G1 controller is explicitly stated as not compatible with Xbox consoles. For PC, it may be recognized as an "Xbox Wireless Controller" in some modes, but direct Xbox console support is not available.
• Broad Compatibility: Users have reported excellent compatibility across various platforms including PC, Nintendo Switch, iOS, and Android, making it a versatile choice for different gaming setups.

Warranty & Support

MACHENIKE Product Warranty Commitment

1. Under the premise that the user correctly uses this product according to the technical instructions, this product is covered by a free one-year warranty from the date of purchase. Warranty service is provided through factory repair. For repair instructions, please scan the QR code on the product packaging.
2. The following situations caused by the user's personal reasons will not be covered by free warranty service:
   • Damage caused by unauthorized disassembly or modification of the product.
   • Damage caused by accidental drops, impacts, liquid spills, or incompatible power supply specifications during use or transportation.
   • Damage caused by lack of reasonable maintenance.
   • Damage caused by not operating according to the instructions in the user manual.
   • Damage or malfunction caused by third-party products, services, or actions.
3. When requesting free warranty service, you must provide a clear, complete, and accurate sales invoice and warranty card. When purchasing the product, you can request the seller to provide the aforementioned sales invoice and warranty card.
4. Repair services outside the warranty scope will be charged according to regulations.

Warranty Card

Dear User,

Thank you for purchasing our company's product. Our company will provide you with warranty service in accordance with the "Consumer Rights Protection Law of the People's Republic of China" and the relevant regulations of the State Administration for Market Regulation, the State Administration for Industry and Commerce, and the Ministry of Finance regarding "Regulations on the Responsibility for Repair, Replacement, and Return of Some Commodities." Please fill out this card carefully and keep it properly for future maintenance.

Customer Name: ____________________ Email: ____________________

Contact Number: ____________________ Postal Code: ____________________

Mailing Address: ____________________________________________________

Product Name: ____________________ Product Model: ____________________

Purchase Date: ____________________ Purchase Channel: ____________________

Serial Number: ____________________

Product Performance Fault Table

Notes on Warranty

1. Please keep this card properly. It must be presented along with the purchase receipt for warranty service.
2. The product comes with a one-year free warranty from the date of purchase, based on the purchase receipt.
3. The following situations are not covered by free service but can be repaired for a fee, with lifetime service:
   • Inability to present warranty instructions and invoice.
   • Altered invoice.
   • Damage caused by accidental factors or improper use.
   • Damage caused by unauthorized repair without our company's permission.
   • Exceeding the three-guarantee period, but still usable after repair.

Official Website

MACHENIKE Official Website: https://www.machenike.com

Copyright Information

• XBOX/Windows are registered trademarks of Microsoft Corporation in the United States.
• Android is a trademark of Google Inc.
• Nintendo Switch is a registered trademark of Nintendo Co., Ltd.
• Other system names and product names appearing in this document are usually registered trademarks or trademarks of their respective developers. Please note that this document does not feature ™ or ® symbols.

If the product firmware is updated, please consult customer service or visit the brand's official website for information, without further notice.