1. Features
- Work with all TV sets, including the latest Smart TVs.
- Watch TV without disturbing others.
- Easy to set up, charge, and use.
- Work up to 10 hours on a full charge.
- Wireless range: 100 ft (30 meters).
- Adjustable volume.
- Can also be used as wired headphones.
- All connecting cables are included.
- One transmitter can be connected to multiple headphones.
- Automatic power on/off: Headphones automatically turn on within 5 seconds of being removed from the charging dock and turn off if no signal is detected within 10 minutes.
- Display information: The transmitter displays the current battery level and the connection type of the interface, reminding the user of the headset's battery level in time.
- Perfectly synced audiovisual: No matter how many devices you connect, you will never experience lip-sync lag.
- Independent volume control: Allows individual volume adjustment without affecting other users.
2. Product Overview
2.1 Transmitter Dock

Image: Transmitter dock with a clear screen display showing battery percentage and charging status.

Image: Rear view of the transmitter dock, detailing input ports: OFF-CH1-CH2 switch, OPT-IN (Optical), COAX-IN (Coaxial), AUX-IN (3.5mm AUX), and DC-5V/1A power input.
2.2 TV Wireless Headphones

Image: Side view of the headphone, highlighting high fidelity sound quality with no delay.

Image: Close-up of the headphone controls, showing ON/OFF/TUNE button, Volume +/- buttons, and AUX port.
- ON/OFF/TUNE: Power on/off and channel tuning.
- Volume + button: Increase volume.
- Volume - button: Decrease volume.
- 3.5mm audio jack: For wired connection.
- USB-C charging port: For direct charging.
- Charging port: For charging via the transmitter dock.
3. Setup
- Plug the included AC adapter into the DC 5V jack of the transmitter dock. Then plug the other end into an AC outlet.
- Slide the OFF-CH1-CH2 switch on the back of the transmitter dock to the CH1 or CH2 position.
- When the transmitter dock is powered on, the LCD screen will light up and display "PWR".
4. Charging Your Headphones
- Make sure the transmitter dock is plugged in and powered on as described in the Setup section.
- Start charging by placing the headphones correctly in the dock of the transmitter.
- When the headphones are being charged, the LCD screen of the transmitter dock will light up, displaying a battery icon and the headphones' battery level (percentage).

Image: Headphones charging on the transmitter dock.
Alternatively, the headphones can be charged directly via the USB-C port using a USB cable.

Image: USB-C charging port on the headphone.
5. Connecting to Your TV
The transmitter can be connected to the TV in 4 different ways:
Method 1: Using the TV's Headphone Jack
- Connect the 3.5mm audio cable to the AUX-IN socket on the rear of the transmitter.
- Connect the other end of the 3.5mm audio cable to your TV's headphone jack.
Note: If there is no sound, make sure your TV speakers are set to "Headset" in your TV's audio settings.
Method 2: Connecting via RCA Red and White Audio Output
- Connect the RCA 3.5mm adapter cable to the RCA Audio Out jack on the TV.
- Then connect the 3.5mm cable to the RCA adapter cable, and plug the other end of the 3.5mm cable into the Audio IN jack of the transmitter.
Note: If there is no sound, ensure you are using the red/white ports marked "Audio Out" on your TV and that your TV speakers are set to "External Speakers".
Method 3: Using the Optical Output on TV
- Plug the included optical cable into the corresponding optical output jack on the TV.
- Connect the other end to the OPT-IN (fiber optic) input of the transmitter.
Important Notes for Optical Output:
- Make sure your TV speakers are set to "External Speakers".
- Make sure the TV audio format is set to "PCM" or turn off "Dolby/DTS". This is very important for proper audio transmission.
- Ensure the audio source sampling rate does not exceed 16bit / 48KHz.
- When using the optical output, please unplug any device from the 3.5mm AUX jack on the transmitter.
Method 4: Connecting via the Coaxial Interface on TV
- Connect the included 1M coaxial adapter cable to the COAXIAL jack on the TV.
- Plug the other end of the cable into the COAX-IN (coaxial) jack of the transmitter.
Note: If there is no sound, refer to the troubleshooting steps for optical output (Method 3) as they are similar.
After choosing a suitable connection method, turn on the transmitter dock and your TV. Ensure your TV is not muted.
- When the transmitter dock is working via the AUX-IN jack, the LCD screen will display “LINE”.
- When the transmitter dock is working via the OPT-IN or COAX-IN jack, the LCD screen will display “COAX/OPT”.
6. Operating the TV Wireless Headphones

Image: Automatic pairing countdown when headphones are removed from the dock.
When the headphones are stored and being charged in the transmitter dock, take them out, and they will automatically turn on and connect within 5 seconds.
If necessary, you can hold the ON/OFF/TUNE button for 3 seconds to manually turn the headphones on/off.
Put the headphones on your head and adjust the headband length for comfort. Adjust the volume using the "V +" and "V -" buttons on the headphones. You can now enjoy TV through the headphones.
Note on Interference: If you experience interference, you can choose from 2 available frequencies by sliding the OFF-CH1-CH2 button on the transmitter dock. Then, press the ON/OFF/TUNE button on your headphones to connect to the selected channel.

Image: One transmitter can connect to multiple headphones simultaneously.

Image: Wide coverage up to 100 feet (30 meters) allows movement around the house.

Image: Independent volume control for personalized listening without disturbing others.
7. Auto Shutoff
To protect the battery, when the battery power drops below 3.2V, an alarm will beep and the TV Wireless headphones will turn off automatically. If this happens, return the headphones to the charging dock to charge them.
The headset will also automatically turn off if no signal is detected within 10 minutes.
8. Wired Headphones Use
The TV Wireless headphones can also be used as wired headphones for outdoor use or on a plane (with a smartphone, tablet, laptop, MP3 player, etc.).
- Connect the included 3.5mm audio cable to the AUX jack on the headphones.
- Plug the other end into your mobile device.
Note: In this mode, you will not be able to adjust the volume using the volume +/- buttons on the headphones.
9. Specifications
| Feature | Transmitter | Headphones |
|---|---|---|
| Voltage | DC 5V | 3.7V (450mAh built-in rechargeable battery) |
| Work Current | 80mA | 55mA |
| Modulate | 50Khz | N/A |
| Mode | Stereo | N/A |
| Work Range | 100ft (30 meters) | N/A |
| Work time | N/A | 8 hours |
| Charging time | N/A | 4 hours (via USB-C) / 5 hours (via dock) |
| S/N ratio | N/A | ≥60dB |
| Distortion | N/A | <1% |
| Frequency response | N/A | 60 - 15,000Hz |
| Material | Plastic | Plastic |
| Sound Isolating | N/A | Yes |
| With Microphone | N/A | No |
| Waterproof | N/A | No |
| Active Noise-Cancellation | N/A | No |

Image: Battery specifications for the headphones.
10. Troubleshooting / FAQ
Why am I not hearing any sound from the headphones?
- Make sure the headphones are tuned to the same channel as the transmitter.
- Double-check the volume levels of: the music source, any sound equipment connected to the transmitter, and the headphones.
- Double-check the connections from the music source to the audio input.
- Check whether the transmitter is powered on and the battery of the headphones is fully charged.
- Ensure your TV is not muted and its audio output settings are correct (e.g., "Headset" for headphone jack, "External Speakers" for RCA/Optical/Coaxial).
- For optical connections, verify the TV audio format is "PCM" and Dolby/DTS is off. Also, check that the audio source sampling rate does not exceed 16bit / 48KHz.
How many transmitters and headphones can work at once?
- Up to 2 independent transmitters can work simultaneously.
- There is no limit to the number of headphones that can be in one area (connected to a single transmitter).
Is there a pairing process to add additional headphones?
- No, there is no pairing process other than selecting the appropriate channel with the ON/OFF/TUNE button located on the headphones.
How far does the transmitter reach?
- The operational range is approximately 100 ft (30 meters).
What is the expected battery life for the headphones?
- The headphones can run for about 8-10 hours continuously on a full charge.
- It takes 4-5 hours to be fully charged.
11. User Tips
- Regional Compatibility: If you are in a region like France and considering a 'US version' of the headphones, it's advisable to check the specific frequency bands used in your country (e.g., 915mhz for US) to ensure compatibility and avoid interference.
- Connecting to TV: Always double-check your TV's audio output settings (e.g., 'Headset' or 'External Speakers') after connecting the transmitter to ensure sound is routed correctly.
- Tablet/Phone Use: For devices like Samsung tablets or smartphones, remember to use the included 3.5mm AUX cable for a wired connection, as the wireless function is primarily for TV.
12. Safety and Compliance Information
RF Energy Exposure and Product Safety Guide
ATTENTION!
Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.
Local Government Regulations
When radios are used as a consequence of employment, the Local Government Regulations requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Retekess radio has an RF Exposure Product Label. Also, your Retekess user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.
Unauthorized Modification and Adjustment
Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority granted by the local government radio management departments to operate this radio and should not be made. To comply with the corresponding requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio management departments equipment authorization for this radio could violate the rules.
FCC Requirements:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
(If applicable) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CE Requirements:
(Simple EU declaration of conformity) Henan Eshow Electronic Commerce Co.,Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at the following internet address: www.retekess.com.
Disposal
The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.
IC Requirements:
Licence-exempt radio apparatus. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF Warning Statements
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
RF Exposure Information
- DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer declared.
Avoid Choking Hazard
Small Parts. Not for children under 3 years.
Protect your hearing:
WARNING
- Use the lowest volume necessary to do your job.
- Turn up the volume only if you are in noisy surroundings.
- Turn down the volume before adding headset or earpiece.
- Limit the amount of time you use headsets or earpieces at high volume.
- When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
- Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.
13. Warranty and Support
Warranty Information
Most new products carry a two-year manufacturer's warranty from the date of purchase.
After-Sales Service
You can obtain warranty and after-sales service by:
- Contacting the seller where you purchased the product.
- For products repaired by our Local Repair Center.
For warranty service, you will need to provide a receipt or proof of purchase from the actual seller for verification.
Exclusions from Warranty Coverage:
- Damage to the product by accident.
- Misuse or abuse of the product, or damage resulting from unauthorized alterations or repairs.
- If the serial number has been altered, defaced, or removed.
EU Importer
Name: Germany Retevis Technology GmbH
Address: Uetzenacker 29, 38176 Wendeburg
For further support, please visit www.retekess.com or contact support@retekess.com.