Hi-Spec Hi-Spec 3.6V Electric Screwdriver

Contents

Hi-Spec 3.6V Electric Cordless Screwdriver

Instruction Manual

1. Introduction

Thank you for choosing the Hi-Spec 3.6V Electric Cordless Screwdriver. This compact and powerful tool is designed for various household DIY tasks, making screw fastening and loosening quick and effortless. Please read this manual carefully before use to ensure safe and optimal operation.

2. General Safety Information

Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury.

  • Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
  • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
  • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
  • Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
  • Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.
  • Avoid accidental starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool.
  • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
  • Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.
  • Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
  • This screwdriver is not suitable for drilling into hard materials or for heavy-duty applications.

3. Package Contents

Please check the box for the following items:

  • 1 x Hi-Spec 3.6V Electric Cordless Screwdriver
  • 1 x USB Charging Cable
  • 20 x 25mm Screwdriver Insert Bits (Torx: T10, T15, T20, T25, T27, T30; Hex: H1/8, H5/32, H3/16, H1/4; Slotted/Flat: 1/8, 5/32, 3/16, 1/4; Philips: PH1, PH2, PH3; Pozidriv: PZ1, PZ2, PZ3)
  • 3 x 50mm Extended Length Screwdriver Bits (Slotted 3/16", Philips PH1, Pozidriv PZ1)
  • 1 x 50mm Magnetic Bit Connector
  • 2 x Brad Point Wood Drill Bits (3mm, 4mm)
  • 1 x Owner's Manual
Contents of the Hi-Spec 3.6V Electric Cordless Screwdriver package, including the screwdriver, various bits, USB cable, and manual.

Figure 3.1: Package Contents

4. Product Features and Components

Familiarize yourself with the key features of your Hi-Spec Electric Screwdriver:

  • Magnetic Bit Holder (1/4" Hex): Allows for quick and easy swapping of bits.
  • Forward/Reverse Switch: Easily switch the rotation direction for tightening or loosening screws.
  • Trigger Switch: Activates the screwdriver.
  • LED Lights: Illuminates the working area for better visibility.
  • TPR Grip: Provides a comfortable and grippy texture for secure handling.
  • USB Charging Port: Conveniently located for easy charging.
Diagram of the Hi-Spec 3.6V Electric Cordless Screwdriver with labeled features: Magnetic Bit Holder, Forward/Reverse Switch, Trigger Switch, LED Lights, TPR Grip, USB Charging Port.

Figure 4.1: Screwdriver Features

Close-up images detailing the Forward/Reverse Switch, USB charging port, and LED Light on the screwdriver.

Figure 4.2: Detailed Feature Views

5. Specifications

FeatureSpecification
Brand NameHi-Spec
Model NumberDT30324B / DT30324P
TypeCordless Screwdriver
Rated Voltage3.6V DC (4V max DC)
Battery Capacity1300 mAh (1.3Ah Li-ion)
No-load Speed200 rpm
Max. Torque3.5 Nm
Power SourceBattery
Charge Time3-5 Hours
Screw Capacity6.35mm (1/4")
CertificationCE
UseHome DIY
Dimensions (L x W x H)14.8 cm x 4.2 cm x 11.0 cm (5.83 in x 1.65 in x 4.33 in)
Image showing the Hi-Spec 3.6V Electric Cordless Screwdriver with key specifications listed: 3.6V DC, 1300 mAh, 200 rpm, 3.5Nm torque.

Figure 5.1: Screwdriver Specifications

Diagram illustrating the dimensions of the Hi-Spec 3.6V Electric Cordless Screwdriver: 14.8 cm / 5.83 in length, 4.2 cm / 1.65 in width, 11.0 cm / 4.33 in height.

Figure 5.2: Screwdriver Dimensions

6. Setup

6.1. Charging the Screwdriver

Before first use, fully charge the screwdriver. The battery indicator will show the charging status.

  1. Locate the USB charging port on the screwdriver.
  2. Connect the provided USB charging cable to the screwdriver's port.
  3. Plug the other end of the USB cable into a suitable USB power output (e.g., a mobile phone charger, laptop socket, or USB wall adapter).
  4. Allow 3-5 hours for a full charge.

6.2. Inserting and Changing Bits

The screwdriver features a magnetic 1/4" hex bit holder for quick bit changes.

  1. Ensure the screwdriver is turned off and the forward/reverse switch is in the middle (locked) position.
  2. Select the appropriate screwdriver bit or drill bit for your task.
  3. Insert the hex end of the bit firmly into the magnetic bit holder until it clicks into place.
  4. To remove a bit, simply pull it straight out from the holder.
Image of a 50mm Magnetic Bit Connector, used for extending reach and holding bits securely.

Figure 6.1: Magnetic Bit Connector

Assortment of 20 most popular 25mm screwdriver insert bits including Torx, Hex, Slotted/Flat, Philips, and Pozidriv types.

Figure 6.2: 25mm Screwdriver Bits

Image showing 3 extended length 50mm screwdriver bits (Slotted 3/16, Philips PH1, Pozidriv PZ1).

Figure 6.3: 50mm Extended Screwdriver Bits

Image of two Brad Point wood drill bits, 3mm and 4mm, suitable for soft wood and plastics.

Figure 6.4: Brad Point Wood Drill Bits

7. Operating Instructions

7.1. Powering On/Off and Direction Control

The screwdriver is operated using the trigger switch and the forward/reverse switch.

  1. To drive screws (forward rotation): Push the forward/reverse switch to the right (towards the front of the tool). Press the trigger switch to activate.
  2. To remove screws (reverse rotation): Push the forward/reverse switch to the left (towards the back of the tool). Press the trigger switch to activate.
  3. Manual use (locked): Place the forward/reverse switch in the middle position. The screwdriver will be locked, allowing for manual tightening or loosening if needed.
  4. LED Light: The integrated LED light will illuminate the work area when the trigger is pressed.
A hand holding the Hi-Spec electric screwdriver, demonstrating its use with the LED light illuminating the work area.

Figure 7.1: Screwdriver in Use with LED Light

7.2. Video Demonstration

Video 7.1: Product Overview and Demonstration of Features

8. Maintenance

  • Cleaning: Keep the tool clean and free from dust and debris. Use a soft, damp cloth to wipe the exterior. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the screwdriver and its accessories in a dry, cool place, away from direct sunlight and moisture. Keep out of reach of children.
  • Battery Care: For optimal battery life, avoid completely draining the battery frequently. Charge the tool regularly, even if not in use, to maintain battery health.
  • Bit Maintenance: Keep screwdriver bits clean and free from rust. Replace worn or damaged bits to ensure efficient operation and prevent damage to fasteners.

9. Troubleshooting

ProblemPossible CauseSolution
Screwdriver does not turn on.Battery is depleted.Charge the screwdriver fully (3-5 hours).
Forward/Reverse switch is in the middle (locked) position.Move the switch to the forward or reverse position.
Screws are not tightening/loosening properly.Incorrect bit type or size.Ensure you are using the correct bit for the screw head.
Bit is worn or damaged.Replace the bit with a new one.
Insufficient torque for the task.This screwdriver is designed for light to medium DIY tasks. For very tight or large screws, a more powerful tool may be required.
LED light not working.Battery is too low.Charge the screwdriver.

10. User Tips

  • Always select the correct bit for the screw head to prevent stripping the screw or damaging the bit.
  • For delicate tasks, use the manual mode (forward/reverse switch in the middle) for precise control.
  • Keep the magnetic bit holder clean to ensure bits are held securely.
  • When working in tight spaces, the compact size and LED light are particularly useful.

11. Warranty and Support

The Hi-Spec 3.6V Electric Cordless Screwdriver comes with a 3-year warranty. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact Hi-Spec customer service through your retailer or the official Hi-Spec website.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.