FD AVIDSEN 433.92MHz Remote Control

Contents

FD AVIDSEN 433.92MHz Rolling Code Remote Control Instruction Manual

For Models: AVIDSEN 114253, 104250, 104251, 104250 OLD, 104250 RED, 104257, 104350, 654250, 114235

1. Product Overview

This remote control is designed for use with AVIDSEN garage door and gate openers operating on a 433.92MHz frequency with rolling code technology. It offers a secure and convenient way to control your automated entry systems.

Three AVIDSEN remote controls and a collage of compatible remote models
Figure 1: AVIDSEN Remote Control and Compatible Models

Package Contents

  • Remote Control
  • English Manual
  • Battery (CR1632, pre-installed)
  • Keychain
Image showing the remote control, manual, battery, and keychain as included items
Figure 2: Items included in the package

2. Setup and Programming

This remote control uses 'programming with the receiver' method. Ensure you have access to your garage door or gate opener's receiver unit before proceeding.

  1. Locate the Receiver: Open the casing of your receiver unit. This unit is typically located next to your motor.
  2. Activate Programming Mode: On the receiver circuit board, press the programming button (often labeled 'PGM'). The LED light on the receiver will illuminate. Release the button.
  3. Program the Remote: Within the next 10 seconds, press any button on your new remote control. Release the button.
  4. Confirmation: Wait for 10 seconds. Your new remote control should now be programmed and ready for use.

Disclaimer: Your old remote must be identical to the one advertised for compatibility. This new remote may not be compatible with other remote models not listed.

3. Operating Instructions

Once programmed, the remote control is straightforward to operate.

  • Activation: Press any of the 4 buttons on the remote control to activate your garage door or gate opener.
  • Range: The remote has a working range of 10-50 meters in open space. Obstacles such as walls, vehicles, or other electronic devices may reduce this range.
  • Security: The dynamic rolling code technology provides a high level of security, making the code non-copyable and preventing unauthorized access.
Top-down view of the remote control showing its four buttons
Figure 3: Remote Control Buttons

4. Maintenance

Battery Replacement

The remote control is powered by a CR1632 battery. If the remote's range decreases significantly or it stops responding, the battery may need replacement.

  1. Carefully open the remote control casing.
  2. Remove the old CR1632 battery.
  3. Insert a new CR1632 battery, ensuring correct polarity (+/-).
  4. Close the remote control casing securely.

Cleaning

To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.

5. Troubleshooting

  • Remote not working after programming: Double-check that your receiver unit is compatible with AVIDSEN 433.92MHz rolling code remotes. Ensure the programming steps were followed precisely. Try reprogramming the remote.
  • Reduced operating range: This often indicates a low battery. Replace the CR1632 battery. Ensure there are no new sources of interference (e.g., other wireless devices) near the remote or receiver.
  • Remote not compatible: As stated in the disclaimer, this remote is specifically designed for certain AVIDSEN models. If your existing remote is not one of the listed compatible models, this remote will not work.

6. Specifications

FeatureSpecification
Brand NameFD
Encoding MethodRolling code
Number of Channels4
Frequency433.92MHz
Working Range10-50 m (open space)
Battery ModelCR1632
Dimensions (L x W x H)5.3cm x 2.5cm x 0.8cm
CertificationCE
OriginMainland China
Product Weight0.193 kg
Package Dimensions15cm x 10cm x 4cm
Remote control with dimensions labeled: 5.3cm length, 2.5cm width, 0.8cm thickness
Figure 4: Remote Control Dimensions

7. Warranty and Support

Your FD AVIDSEN remote control comes with the following assurances:

  • Warranty: Most products from our store have a 1-year warranty.
  • Returns: Enjoy 7 days to return the product if there are any quality problems.
  • Support: All emails regarding product support will be answered within 24 hours.
Warranty and Service information: 7 days return, 1 year warranty, 24 hour email support
Figure 5: Warranty and Service Details

8. User Tips

  • Verify Compatibility: Always confirm that your existing remote or receiver model is explicitly listed as compatible before purchasing or attempting to program.
  • Clear Line of Sight: For optimal performance, ensure a clear line of sight between the remote and the receiver, especially at the maximum operating range.
  • Test After Programming: After programming, test all buttons to ensure they function correctly and consistently.
  • Keep Receiver Accessible: For future reprogramming or troubleshooting, ensure your receiver unit remains accessible.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.