SVBONY TransAir (ST2)

Contents

SVBONY ST2 HD Wireless HDMI Transmission System User Manual

Model: TransAir (ST2)

Brand: SVBONY

1. Introduction

The SVBONY ST2 Wireless HDMI Transmitter and Receiver system provides a seamless, cable-free solution for transmitting high-definition video and audio. Featuring a 0.42-inch OLED color display, 5G high-speed transmission, and a range of 50-80 meters, this plug-and-play kit is designed for various applications, from presentations to home entertainment.

SVBONY ST2 Wireless HDMI Transmitter and Receiver units

Figure 1: SVBONY ST2 Wireless HDMI Transmitter (TX) and Receiver (RX)

2. Package Contents

Please check the package for the following items:

  • 1 x Transmitter (TX)
  • 1 x Receiver (RX)
  • 1 x Mini HDMI adapter
  • 1 x Micro HDMI adapter
  • 1 x Type-C to HDMI cable
  • 2 x USB-C data cables
  • 1 x Custom packaging box
  • 1 x User manual (7 languages)
Contents of the SVBONY ST2 package

Figure 2: Package Contents

3. Setup Instructions

The SVBONY ST2 system is designed for plug-and-play operation, requiring no WiFi, app, or Bluetooth for connection.

  1. Install Transmitter (TX): Plug the transmitter (TX) into the HDMI output port of your source device (e.g., laptop, PC, camera, TV box). Connect the TX to a power source (at least 5V/2A) using one of the provided USB-C power cables.
  2. Install Receiver (RX): Plug the receiver (RX) into the HDMI input port of your receiving device (e.g., TV, monitor, projector). Connect the RX to a power source (at least 5V/2A) using the other provided USB-C power cable.
  3. Power On: Ensure both the TX and RX units are powered on. The OLED display on each unit will activate.
  4. Automatic Connection: The transmitter and receiver will automatically connect. Once connected, the OLED display will show the connection status, signal strength, and video output (e.g., CH1 1080P60).
  5. Adapters: Use the included Mini HDMI adapter, Micro HDMI adapter, or Type-C to HDMI cable if your source device requires a different HDMI connection type.
Diagram showing the three steps for installing the SVBONY ST2 system

Figure 3: Installation Steps

Image showing various compatible devices like TV, Monitor, Projector, Laptop, Camera, Tablet, Smartphone, Switch

Figure 4: Compatible Devices and Adapters

4. Operating Instructions

4.1 OLED Color Display

The 0.42-inch OLED color display provides instant feedback on the device status, including:

  • Signal Strength: Indicates the quality of the wireless connection.
  • Channel: Shows the currently used 5G frequency channel (CH0-CH8).
  • Image Quality/Resolution: Displays the current video output resolution and frame rate (e.g., 1080P60).
  • Connection Status: Indicates if the TX and RX are successfully connected.
OLED Color Display showing CH1 1080P60, Signal, Channel, Image Quality

Figure 5: OLED Display Feedback

4.2 Video Transmission

Once connected, the system will automatically transmit video and audio from your source device to the display. The 5G chip ensures fast and stable transmission with ultra-low latency (<0.1s).

Video 1: SVBONY ST2 Product Overview and Demonstration

Diagram showing a laptop connected to a transmitter and a TV connected to a receiver, with wireless signal between them

Figure 6: Wireless Video Transmission Setup

4.3 Channel Selection

The system utilizes 9 5GHz frequency bands (CH0-CH8) to ensure stable signal transmission. If you experience interference, you may be able to manually select a different channel, though this is typically handled automatically.

Diagram illustrating 9 5GHz channels for stable signal compared to 2.4G

Figure 7: 9 5GHz Channels for Stable Signal

5. Maintenance

To ensure the longevity and optimal performance of your SVBONY ST2 system, follow these simple maintenance guidelines:

  • Cleaning: Gently wipe the units with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials.
  • Storage: Store the transmitter and receiver in a cool, dry place when not in use.
  • Handling: Handle the devices with care to prevent physical damage. Avoid dropping or subjecting them to strong impacts.
  • Power Supply: Always use a stable 5V/2A power supply for both units to prevent power-related issues.

6. Troubleshooting

If you encounter issues with your SVBONY ST2 system, please refer to the following common problems and solutions:

6.1 No Signal / Disconnection

  • Check Power: Ensure both the transmitter (TX) and receiver (RX) are properly connected to a stable 5V/2A power source and are powered on.
  • Check HDMI Connections: Verify that the TX is securely plugged into the source device's HDMI output and the RX into the display's HDMI input. Ensure any adapters are correctly used.
  • Monitor OLED Display: Check the OLED display on both units. If it shows "NO TX" or "NO RX", it indicates a connection issue.
  • Range and Obstacles: Ensure the TX and RX are within the effective transmission range (50-80m in open areas). While the signal can penetrate walls, thick obstacles may reduce range and signal quality. Try reducing the distance or moving obstacles.
  • Interference: The system uses 5GHz frequency bands. If you are in an environment with many other 5GHz devices, interference might occur. The system typically auto-selects the best channel, but if issues persist, try moving the units or checking for other strong 5GHz sources.

6.2 Image Quality Issues / Lag

  • Signal Strength: Check the signal strength indicator on the OLED display. Low signal strength can lead to reduced image quality or lag.
  • Distance and Obstacles: As mentioned above, excessive distance or obstacles can degrade signal quality.
  • Source Device Output: Ensure your source device is outputting a stable 1080P/60Hz signal.
  • Display Input: Verify your display device is set to the correct HDMI input and supports 1080P/60Hz.

6.3 Compatibility Issues

  • The wireless transmitter supports projecting from PC/laptop/cameras/DV/TV box (TX) to projector/monitor/HDTV (RX).
  • Note that it does not support all smartphones or iPads directly. Your device needs to support HDMI transmission.

7. Specifications

FeatureSpecification
Model NumberTransAir (ST2)
Transmission Type5G High-Speed Wireless
Transmission Range50-80 meters (in open area)
Latency<0.1 seconds
Video Output Resolution1080P @ 60Hz (supports 4K decoding)
Display0.42-inch OLED Color Display
Frequency Bands9 channels (CH0-CH8) from 5.1 to 5.8 GHz
Power Consumption4W
Weight (pair)40g
Dimensions (each unit)Approx. 74mm (L) x 24mm (W) x 13mm (H)
Compatible Equipment StylePlayer, Professional Audio Equipment
PackageYes
Image showing the compact design of the transmitter and receiver with dimensions and weight

Figure 8: Compact Design and Dimensions

Image showing a laptop connected to a large screen displaying 1080P 60Hz content

Figure 9: 1080P/60Hz Crisp & Vivid Output

8. User Tips

  • Optimal Placement: For the best transmission range and signal quality, try to place the transmitter and receiver with a clear line of sight, minimizing obstructions like thick walls or metal objects.
  • Power Source: Always use a reliable 5V/2A power adapter for both units. Insufficient power can lead to unstable connections or performance issues.
  • Check OLED: Regularly glance at the OLED display for quick status checks. It's your primary indicator for connection, signal, and resolution.
  • Cooling: While compact, ensure the units have adequate ventilation, especially during prolonged use, to prevent overheating.

9. Warranty & Support

For warranty information, technical support, or service inquiries, please contact the seller or refer to the official SVBONY website. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.