EARU EAL-1

Contents

EARU EAL-1 Electronic Residual Current Circuit Breaker Instruction Manual

Model: EAL-1 | Brand: EARU

1. Introduction

The EARU EAL-1 series is a high-performance Electronic Residual Current Circuit Breaker (RCBO/RCCB/MCB) designed to provide comprehensive protection against leakage current, overload, and short circuits in electrical systems. This device is suitable for various applications, including household lighting distribution boxes and EV charging circuits. It is available in Type AC, Type A, and Type B to cater to different types of leakage current detection requirements.

Key Features:

  • Leakage protection
  • Overload protection
  • Short circuit protection
  • 2-pole configuration
  • Rated Voltage: 230V~ 50/60Hz
  • Mechanical lifespan: 20,000 cycles
  • CE Certified, compliant with IEC/EN61009-1 and GB16917.1 standards
  • Rail-mounted installation
  • PC flame retardant material for enhanced safety
EARU EAL-1 Circuit Breaker Types

Figure 1: Overview of EARU EAL-1 Circuit Breaker (Type A, Type B, Type AC)

2. Safety Information

WARNING: Installation and maintenance should only be performed by qualified electricians in accordance with local electrical codes and regulations. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Always disconnect power before installing or servicing the circuit breaker.
  • Ensure proper grounding.
  • Do not operate the device if it appears damaged.
  • Verify correct wiring connections to prevent malfunction.
  • The device is designed for specific current and voltage ratings; do not exceed these limits.

3. Setup and Installation

The EARU EAL-1 circuit breaker is designed for 35mm standard rail installation, making it suitable for direct mounting in household lighting distribution boxes.

3.1 Component Identification

EARU EAL-1 Component Identification and Wiring Diagram

Figure 2: Component Identification and Basic Wiring Diagram

  • Wiring Terminal (1, 2, N): Points for connecting live (L) and neutral (N) wires.
  • Leakage Value: Indicates the residual current sensitivity (e.g., 30mA).
  • Function Model: Specifies the type (e.g., Type A, Type B, Type AC).
  • Test Button (T): Used for monthly functional testing.
  • Wiring Diagram: Illustrates internal connections.
  • Rated Voltage: Operating voltage (e.g., 230V~).
  • Breaking Capacity: Maximum fault current the breaker can safely interrupt (e.g., 6000A).
  • Visible Window: Indicator for circuit status (Green: Breaker open/circuit stops running; Red: Circuit breaker closed/circuit operating normally).
  • Rated Current: Maximum continuous current (e.g., C40 for 40A).
  • T-type Operating Handle: Lever to manually switch the breaker ON/OFF.

3.2 Mounting

The circuit breaker features a fixed buckle for easy rail-mounted installation. Simply align the device with the 35mm DIN rail and press firmly until it clicks into place.

35MM Standard Rail Installation

Figure 3: Example of 35MM Standard Rail Installation

3.3 Wiring Connections

Connect the live (L) and neutral (N) wires to the designated wiring terminals. The terminals are fixed with screws for secure connections. Ensure all connections are tight to prevent loose contacts and overheating.

Wiring Terminals and Visualization Window

Figure 4: Close-up of Wiring Terminals and Visualization Window

Wire Selection Guide:

Rated CurrentCopper Core Wire (mm²)Load Power (W)Practical Scenarios
1-5A<1mm<1100wSmall power equipment
6A≥1mm≤1320wLighting
10A≥1.5mm≤2200wLighting
16A≥2.5mm≤3520wLighting socket
20A≥2.5mm≤4400wBedroom socket
25A≥4mm≤5500wKitchen and bathroom sockets
32A≥6mm≤7040wKitchen and bathroom sockets
40A≥10mm≤8800wPower main switch
50A≥10mm≤11000wPower main switch
63A≥16mm≤13200wPower main switch
80A≥16mm≤17600wPower main switch
100A≥25mm≤22000wPower main switch
125A≥35mm≤27500wPower main switch

Table 1: Recommended Copper Wire Sizes based on Rated Current and Load Power. This list is for reference only. Please choose the specific model based on the size of the house and the power consumption of the household appliances.

4. Operating Instructions

4.1 Turning On/Off

  • To turn the circuit ON, push the T-type operating handle UP. The visible window will show RED, indicating the circuit is closed and operating normally.
  • To turn the circuit OFF, push the T-type operating handle DOWN. The visible window will show GREEN, indicating the breaker is open and the circuit has stopped running.
Window Indicator Operation Display

Figure 5: Window Indicator showing ON (Red) and OFF (Green) states.

4.2 Understanding Different Types (AC, A, B)

The EAL-1 series offers different types of leakage protection:

  • Type AC: Provides protection against AC leakage current only. It does not respond to pulsating DC leakage current.
  • Type A: Protects against AC leakage current and also pulsating DC leakage current.
  • Type B: Builds upon Type A, emphasizing additional protection against smooth DC residual current. This type is often recommended for applications like EV chargers.
Comparison of Type AC, Type A, Type B Circuit Breakers

Figure 6: Visual comparison and description of Type AC, Type A, and Type B.

Video 1: Demonstration of the circuit breaker's operation, including switching on/off and using the test button.

5. Maintenance

5.1 Monthly Test

To ensure the leakage protection function is working correctly, press the 'Test Monthly' button (marked 'T') on the front of the circuit breaker once a month. The breaker should trip immediately. If it does not trip, the device may be faulty and should be replaced by a qualified electrician.

5.2 Cleaning

Keep the circuit breaker clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners or solvents.

6. Troubleshooting

If the circuit breaker trips, it indicates a fault condition (leakage, overload, or short circuit). Follow these steps:

  1. Identify the Cause: Disconnect all appliances or loads connected to the circuit.
  2. Reset the Breaker: Push the operating handle fully to the OFF position (down), then back to the ON position (up).
  3. Test the Circuit: If the breaker holds, reconnect appliances one by one to identify the faulty device or wiring section.
  4. Persistent Tripping: If the breaker trips immediately after resetting, or if it trips frequently, there is a persistent fault in the wiring or an appliance. Consult a qualified electrician for inspection and repair.
  5. Test Button Failure: If the 'Test Monthly' button does not trip the breaker, the device is faulty and must be replaced.

7. Specifications

ParameterValue
Product SeriesEAL-1
Product TypeAC/A/B type
Rated Voltage230V~ 50/60Hz
Rated Current Options6/10/16/20/25/32/40/50/63A
Leakage Value Options10/30/100/300mA
Mechanical Lifespan20,000 cycles
Mounting35mm DIN rail mounted
Product CertificationCE
StandardIEC/EN61009-1 GB16917.1
Rated Short-Circuit Capacity6000A
Product FunctionOverload/Short Circuit/Leakage Protection
Is Smart DeviceNo
High-concerned chemicalNone
Product Dimensions and Parameters

Figure 7: Product Dimensions and Detailed Parameters

8. User Tips

  • Correct Type Selection: For EV charging applications, consider using a Type B RCBO for enhanced protection against smooth DC residual currents.
  • Regular Testing: Make the monthly test a routine to ensure the leakage protection mechanism is always functional.
  • Professional Installation: Always have the circuit breaker installed by a certified electrician to guarantee safety and compliance.
  • Wire Gauge: Refer to the wire selection guide (Table 1) to ensure appropriate wire thickness for your rated current to prevent overheating and ensure optimal performance.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.