1. Introduction
Thank you for choosing the Silent Quartz Clock Movement Kit. This kit provides all the necessary components to repair, replace, or create your own clocks, offering silent and precise timekeeping. With multiple movement sizes and a variety of clock hand styles, it's perfect for various DIY clock projects.
2. Package Contents
Please check the package to ensure all items are present:
- 3 x Clock Movements (Shaft length 14.5mm)
- 2 x Clock Movements (Shaft length 17mm)
- 2 x Clock Movements (Shaft length 20mm)
- 10 Sets of Aluminium Clock Hands (various styles and lengths)
- 7 x Washers (rubber and metal)
- 7 x Hooks

Image: All components included in the Clock Mechanism Kit.
3. Specifications
| Feature | Detail |
|---|---|
| Movement Dimensions | 56 x 56 x 16.2mm (2.2 x 2.2 x 0.63 inches) |
| Movement Material | Metal and Plastic |
| Clock Hand Material | Aluminium |
| Power Source | 1 x AA Battery (not included) |
| Features | Silent sweeping movement, High precision, Sturdy |
| Shaft Length | Thread Height | Compatible Panel Thickness |
|---|---|---|
| 14.5mm (0.57 inch) | 6.7mm (0.26 inch) | 1-4 mm |
| 17mm (0.66 inch) | 9.7mm (0.38 inch) | 1-5 mm |
| 20mm (0.78 inch) | 11.7mm (0.46 inch) | 9-13 mm |

Image: Detailed dimensions of clock movements and shaft lengths, with panel thickness guide.
4. Setup Instructions
4.1. Choosing the Right Movement
Before assembly, select the appropriate clock movement based on the thickness of your clock panel. Refer to the 'Movement Shaft Lengths and Panel Compatibility' table in the Specifications section for guidance.
4.2. Assembly Guide
Follow these steps to assemble your clock mechanism:
- Insert the clock movement (1) through the back of your clock panel (4, not included).
- Place the rubber washer (2) onto the movement shaft from the front of the panel.
- Place the metal washer (3) onto the shaft, on top of the rubber washer.
- Secure the movement to the panel using the hex nut (5), tightening it gently.
- Carefully press the hour hand (6) onto the shaft. Ensure it is aligned at 12 o'clock.
- Next, press the minute hand (7) onto the shaft, also aligning it at 12 o'clock.
- Finally, press the second hand (8) onto the shaft.
- Secure all hands with the cap nut (9).

Image: Easy-to-follow diagram for clock mechanism assembly.
For a visual guide, please watch the product assembly video:
Video: Demonstration of the clock mechanism kit contents and assembly process.
4.3. Battery Installation
Insert one fresh 1.5V AA battery into the battery compartment on the back of the clock movement, observing the correct polarity (+/-).
5. Operating Instructions
To set the time, turn the time set knob located on the back of the clock movement. Adjust the hands to the correct time.
6. Maintenance
- Battery Replacement: Replace the AA battery approximately once a year, or when the clock starts losing time or stops.
- Cleaning: Use a soft, dry cloth to clean the clock hands and movement. Do not use liquid cleaners.
- Handling Hands: The clock hands are made of aluminium and can bend easily. Handle them with care during installation and cleaning.
7. Troubleshooting
- Clock Not Moving:
- Check if the battery is inserted correctly and is fresh.
- Ensure the clock hands are not touching each other or the clock face. Gently adjust them if necessary.
- Verify that the nuts are not overtightened, which could impede movement.
- Inaccurate Time:
- Replace the battery with a new one.
- Ensure the hands are securely attached and not slipping.
- Hands Getting Stuck:
- Check for any obstructions or if the hands are bent and touching each other or the clock face. Gently straighten or adjust them.
8. User Tips
- When installing the aluminium clock hands, apply gentle pressure to avoid bending them.
- Always verify the compatibility of the movement shaft length with your clock panel thickness before starting assembly.
- The variety of hands and movement sizes makes this kit highly versatile for different clock repair and creation projects.
9. Frequently Asked Questions (FAQ)
- Q: How many clock movements are included in this kit?
- A: The kit includes a total of 7 clock movements: 3 with a 14.5mm shaft, 2 with a 17mm shaft, and 2 with a 20mm shaft.
10. Warranty and Support
For any questions, issues, or support needs regarding your clock mechanism kit, please contact the seller directly through your purchase platform. They will be able to provide assistance and guidance.