Sayin 376

Contents

Sayin Model 376 Emergency Hand Crank Radio

User Instruction Manual

Introduction

The Sayin Model 376 is a versatile multi-purpose emergency radio designed for reliability in various situations. It integrates AM/FM/WB NOAA weather radio capabilities, a powerful 5000mAh power bank, a multi-mode flashlight, a reading lamp, and an SOS alarm. With multiple power supply options including USB, hand crank, solar panel, and AAA batteries, it ensures you stay connected and informed during emergencies or outdoor activities.

Package Contents

  • Emergency Radio (x1)
  • User Manual (x1)
  • Type-C USB Cable (x1)
  • Lanyard (x1)

Specifications

FeatureSpecification
Model Number376
Frequency RangeFM: 87~108MHz, AM: 520-1710KHz, WB: 162.40-162.55MHz
Dimensions (WxHxD)153 x 47 x 77 mm (6.02 x 1.85 x 3.03 in)
Weight351g
Max Power1.5W
Working Voltage2.7-4.2V
Internal Battery5000mAh/3.7V Li-ion
Flashlight Power1W
Body MaterialPlastic
FunctionsBuilt-In Speaker, Flashlight, Built-in Amplifier, Power Bank, Reading Lamp, SOS Alarm
CertificationsCE, FCC, RoHS, pse, weee
ScreenYes (LCD Display)
ConnectivityNo Wi-Fi, No Bluetooth

Setup

First Use & Battery Activation

If the radio is being used for the first time or has been idle for more than 60 days, it is recommended to activate the internal battery. Place the unit under strong solar light (daylight > 86000LUX) for 30 minutes, or hand crank for one minute to activate the battery.

AAA Dry Battery Installation

  1. Locate the battery compartment cover on the bottom of the device.
  2. Remove the cover.
  3. Insert 3 AAA batteries into the compartment, ensuring the negative (-) end is placed against the spring.
  4. Replace the cover. The LCD screen will display the battery level for AAA batteries.

Note: There is a priority to use AAA dry batteries. Remove AAA dry batteries when they are not in use.

AAA Dry Battery Compartment
Image: AAA Dry Battery Compartment and other power options.

Operating Instructions

Powering the Device (Charging)

The radio can be powered and charged via multiple methods:

  • USB Charging: Insert the supplied Type-C USB cable into the radio's input port and connect the other end to a USB power source (e.g., wall adapter, computer). The 4 charging indicators will flash red while charging and turn blue when fully charged. A full charge takes approximately 2-3 hours for the internal 5000mAh Li-ion battery.
  • Hand Crank Dynamo: Extend the hand crank handle located on the bottom of the device. Rotate the handle either clockwise or counter-clockwise at a speed of 130-150 RPM. The red LED indicator will light up when the handle is being turned. One minute of winding provides approximately 5 minutes of radio play (at medium volume) or 30 minutes of flashlight use.
  • Solar Powered: Place the radio with its solar panel facing direct sunlight. The red LED indicator will light up when sufficient sunlight is received for charging. The charging efficiency depends on the intensity of the sun's rays. Solar charging is primarily for maintaining the battery level and is not designed for a full charge.
Radio Parts Diagram
Image: Diagram of radio components including charging ports and controls.

Radio Operation

  1. Power On/Off: Press the
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.