1. Introduction
This manual provides essential information for the safe and efficient operation of your JINKA XE-721 Semi-auto Contour Vinyl Graph Cutting Plotter Machine. Please read this manual thoroughly before operating the machine to ensure proper setup, usage, and maintenance. The JINKA XE-721 is designed for precise cutting of various materials, including vinyl stickers, car stickers, and sublimation materials, offering personalized design capabilities with adjustable cutting speed and force.

Figure 1: JINKA XE-721 Semi-auto Contour Vinyl Graph Cutting Plotter Machine
2. Safety Instructions
Always observe the following safety precautions to prevent injury and damage to the machine:
- Ensure the machine is placed on a stable, level surface.
- Keep hands and loose clothing away from moving parts during operation.
- Do not attempt to move the cutting carriage manually while the machine is powered on or operating.
- Use only the specified power supply (AC110V-AC120V / AC200V-AC240V, 50Hz/60Hz).
- Keep the work area clean and free of obstructions.
- Unplug the machine from the power outlet before performing any maintenance or when not in use.
- Do not operate the machine in environments outside the specified temperature and humidity ranges.
3. Product Components
Familiarize yourself with the main components of your JINKA XE-721 cutting plotter:
- Control Panel: Features a 9*16 bits keypad and English display for adjusting settings like speed, force, and origin.
- Cutting Carriage: Houses the cutting blade or pen, moving along the X-axis.
- Material Feeding Roller: Aluminum roller that feeds the material along the Y-axis.
- Pinch Rollers: Secure the material against the feeding roller for accurate movement.
- Interface Ports: Includes USB 2.0 and RS-232C (COM) ports for computer connectivity.
- Reset Switch: Used to reset the machine.
- Stand: Provides stable support for the machine.

Material Feeding Roller

Pinch Rollers

Cutting Carriage

Rear Ports (USB and COM)

Reset Switch

Machine Stand
4. Specifications
Key technical specifications for the JINKA XE-721 model:
| Feature | Specification (XE-721) |
|---|---|
| Model | XE-721 |
| Max. Paper Width | 720mm |
| Max. Plotting Width | 610mm |
| Max. Cutting Speed | 800mm/s |
| Max. Plotting Force | 500g |
| Driver | Stepper Motor |
| Control Panel + Display | 9*16 bits keypad, English display |
| Cache Capacity | 4M |
| Carriage | Single position carriage |
| Feeding Roller | Aluminum feeding roller |
| Interface | COM + USB port |
| Repeatability | 0.1mm |
| Power Supply | AC110V-AC120V / AC200V-AC240V, 50Hz/60Hz |
| Operating Environment | Temperature: +5℃ to +35℃, relative humidity 30%-70% |
| Stand | Included |
| Software Compatibility | JKanycut/Signmaster |
| Operating System Compatibility | Windows XP, Vista, 7/8/10 (32 & 64 bit), MAC |
5. Setup Guide
5.1 Assembling the Stand
The XE-721 model includes a stand. Follow the instructions provided with the stand components to assemble it securely. Ensure all screws are tightened and the stand is stable before placing the plotter machine on it.
5.2 Connecting the Machine
- Place the plotter machine securely on the assembled stand.
- Connect the power cable to the machine and then to a suitable power outlet (AC110V-AC120V or AC200V-AC240V, 50Hz/60Hz).
- Connect the plotter to your computer using either the USB 2.0 port or the RS-232C (COM) serial port.
- Install the necessary cutting software (e.g., JKanycut/Signmaster) and drivers on your computer.
5.3 Loading Material
- Lift the pinch rollers.
- Place your vinyl or other cutting material onto the material feeding roller, ensuring it is aligned straight.
- Lower the pinch rollers to firmly secure the material. Ensure the material is taut and free of wrinkles.
5.4 Initial Calibration (Offset Calibration)
For precise contour cutting, perform an offset calibration. The video demonstrates this process:
Video 1: Setup, Calibration, and Contour Cutting Demonstration
- Load a calibration sheet into the plotter.
- Replace the cutting blade with a pen tool in the carriage.
- Use the control panel to perform a calibration test, drawing on the sheet.
- Measure the X and Y offsets as indicated on the calibration sheet (e.g., X=2, Y=-1).
- Input these offset values into your cutting software for accurate contour cutting.
6. Operating Instructions
6.1 Control Panel Functions
The control panel allows you to manage various machine functions:
- Reset: Resets the machine to its initial state.
- Pause: Temporarily stops the cutting process.
- Setup: Accesses machine settings.
- Test: Performs a test cut to check blade depth and force.
- Origin: Sets the starting point for cutting.
- Move (V+, V-, <, >): Manually moves the carriage and material.
6.2 Adjusting Cutting Parameters
You can adjust the cutting speed and cutting force directly from the control panel or through your cutting software. Experiment with different settings on scrap material to find the optimal parameters for your specific material type and thickness.
6.3 Performing a Cut
- Prepare your design in the compatible cutting software (JKanycut/Signmaster).
- Ensure the material is correctly loaded and secured.
- Set the origin point on the machine.
- Send the design from your computer to the plotter.
- Monitor the cutting process. Use the Pause button if any issues arise.
6.4 Contour Cutting
The semi-auto contour cutting feature allows for precise cuts around printed designs. After printing your design with registration marks, load the material into the plotter. The machine will use its optical sensor to detect these marks and align the cut path accurately. Ensure your software settings for contour cutting match the printed registration marks.

Example: Vinyl Sticker Cutting

Example: Car Sticker Cutting

Example: Sublimation Material Cutting
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your cutting plotter:
- Cleaning: Regularly clean the machine, especially the cutting area, material feeding roller, and pinch rollers, to remove dust and material debris. Use a soft, dry cloth.
- Blade Replacement: Replace the cutting blade when it becomes dull to maintain cutting precision. Refer to the blade replacement instructions provided with your blades.
- Software Updates: Keep your cutting software and drivers updated to the latest versions for compatibility and performance improvements.
- Storage: When not in use for extended periods, cover the machine to protect it from dust and store it in a dry, temperature-controlled environment.
8. Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine not powering on | Power cable loose or disconnected; power outlet issue. | Check power connections; try a different outlet. |
| Cutter not cutting or cutting poorly | Dull blade; incorrect blade depth/force settings; material not loaded correctly. | Replace blade; adjust blade depth/force; re-load material ensuring it's flat and secure. |
| Machine not responding to computer | Loose data cable; incorrect port selection in software; driver issues. | Check USB/COM cable connections; verify port settings in software; reinstall drivers. |
| Inaccurate contour cutting | Improper calibration; unclear registration marks; material shifting. | Perform offset calibration; ensure clear, well-defined registration marks; secure material firmly. |
9. User Tips
While no specific user tips were available from the provided data, here are some general recommendations for optimizing your experience with the JINKA XE-721:
- Always perform a small test cut on scrap material before a large project to verify blade settings and material compatibility.
- Keep your cutting software updated to benefit from the latest features and bug fixes.
- For intricate designs, consider reducing the cutting speed to achieve cleaner cuts.
- Ensure your material is free of dust and debris before loading to prevent damage to the blade and improve cut quality.
10. Warranty and Support
The JINKA XE-721 cutting plotter is designed for durability and comes with a long warranty to ensure a long service life. For any technical assistance or support inquiries, please utilize the online support channels provided by the manufacturer.
11. Contact Information
For further questions or support, please contact customer service:

Figure 2: Customer Service Contact Details