ETENWOLF AIR 3

Contents

ETENWOLF AIR 3 Wireless Electric Air Pump User Manual

Model: AIR 3

Introduction

Thank you for purchasing the ETENWOLF AIR 3 tiny pump. Each product has been carefully tested by our engineers to ensure optimal performance. Before using the device, please carefully read and adhere to the following instructions for maximum performance and security.

Warning!

Please read all safety warnings and instructions to reduce the risk of electric shock, fire, and/or serious injury.

Product Overview

The ETENWOLF AIR 3 is a versatile, compact, and powerful electric air pump designed for various outdoor and indoor inflation and deflation needs. It also features an integrated camping light.

Components

ETENWOLF AIR 3 pump with labeled parts and specifications
Figure 1: ETENWOLF AIR 3 Pump with key features
  1. Hanging ring
  2. Deflation port
  3. Start/pause power button
  4. Battery indicator
  5. Light button
  6. Type-C Charging port
  7. Camping light
  8. Inflation port

Package Contents

Contents of the ETENWOLF AIR 3 package including pump, manual, cable, nozzles, and storage bag
Figure 2: What's in the box
  • AIR 3 Outdoor inflation pump x1
  • USB-A to USB-C charging cable x1
  • Gas nozzle x5 (various sizes)
  • Storage Bag x1
  • User Manual (this document)

Setup and Usage

Inflation Steps

Four-step visual guide for inflating with the ETENWOLF AIR 3 pump
Figure 3: Inflation Guide
  1. Attach the appropriate nozzle clockwise onto the inflation port.
  2. Long-press the Start/pause power button for 2 seconds to activate the pump.
  3. Connect the nozzle to the object to be inflated and press the Start/pause power button to begin inflation.
  4. Press the Start/pause power button again to stop inflation.

Deflation Steps

  1. Attach the appropriate nozzle clockwise onto the deflation port.
  2. Long-press the Start/pause power button for 2 seconds to activate the pump.
  3. Connect the nozzle to the object to be deflated and press the Start/pause power button to begin deflation.
  4. Press the Start/pause power button again to stop deflation.

Note: The air pump requires manual stopping; it will not stop automatically. Always check the allowable pressure before use. Overinflating can cause object explosion.

Nozzle Applications

Diagram showing various nozzles and their compatible inflatable items like air mattresses, vacuum bags, swimming rings, camping pads, and inflatable pools.
Figure 4: Nozzle compatibility for various inflatables
  • Air Mattress/Floating bed/Air pillow: Use the nozzle with dimensions 16mm, 19.8mm, 20.6mm, 22.2mm, 27.9mm.
  • Vacuum storage bag: Use the nozzle with dimensions 27.9mm, 30.1mm.
  • Swimming ring/Inflatable toy: Use the nozzle with dimensions 5.9mm, 53.3mm.
  • Camping sleeping pad: Use the nozzle with dimensions 27.9mm, 30.1mm.
  • Inflatable swimming pool: Use the nozzle with dimensions 27.9mm, 30.1mm.

Operating Instructions

Inflation and Deflation Speed Control

Long-press the power button for 2 seconds to turn on the device. Press the power button once more to initiate high-speed operation. Within the first 5 seconds of high-speed operation, press the power button a second time to switch to low-speed operation. Press the power button a third time to stop the operation.

If the high-speed fan has been operating for more than 5 seconds, pressing the power button will stop the operation immediately.

  • High speed flow: 13 CFM (Cubic Feet Per Minute) / 360 LM (Liters per Minute)
  • Low speed flow: 8 CFM (Cubic Feet Per Minute) / 225 LM (Liters per Minute)

In any operating state, long-press the power button for 2 seconds to turn off the device, including the LED light.

Camping Light Function

ETENWOLF AIR 3 pump used as a camping light with different brightness levels and durations
Figure 5: Camping Light Modes

Press the light button to turn on the light when the pump is activated. The light has multiple modes:

  • Level 1: 60 lumens, Lighting Duration: 40 hours (under full charge)
  • Level 2: 200 lumens, Lighting Duration: 10 hours (under full charge)
  • Level 3: 600 lumens, Lighting Duration: 3 hours (under full charge)
  • Strobe light
  • SOS signal

In any active light mode, press and hold the light button for 2 seconds to turn off the light.

Maintenance

Battery Charging

Diagram showing the ETENWOLF AIR 3 pump charging via various methods: wall adapter, power bank, laptop, and car charger.
Figure 6: Charging methods for the AIR 3 pump

Please use a certified charger that can provide a voltage of 5V and a maximum charging current of 3A (5V/3A).

Battery Indicator:

  • 0-10% orange flashing
  • 10%-30% orange
  • 30%-100% white

While Charging:

  • 0-99% white flashing
  • 100% full charged white

Charging Time: Approximately 1.5 hours (5V/2A).

General Maintenance

  • Please charge the device once every six months to maintain battery performance.
  • Keep the device clean and free from dust and debris.

Troubleshooting and Safety

Safety Instructions

  • Red flashing light: Indicates high temperature warning or overload. Check for vent blockage and allow the device to cool down.
  • Use a compatible charger. If unable to charge, try a different compatible charger.
  • Adult use only.
  • Do not drop the unit into water or expose it to rain or water. This product is not waterproof.
  • Do not obstruct vent holes or open sources.
  • Do not insert objects into the inflation or deflation connector.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.

Specifications

FeatureETENWOLF AIR 3
Model NameAIR 3
Brand NameETENWOLF
Item TypePUMPS
MaterialPlastic
Item Weight240g
Item Dimensions (L x W x H)2.56 inch x 2.13 inch x 3.86 inch (6.5 cm x 5.4 cm x 9.8 cm)
Max Output Pressure0.65 PSI (4.5 kPa)
Airflow Rate (High Speed)360 L/min @ 0 PSI (13 CFM)
Airflow Rate (Low Speed)225 L/min @ 0 PSI (8 CFM)
Peak Power8W
Battery Capacity2600mAh x 3.7V (9.6Wh)
ChargingUSB-C 10W Fast Charging
Charging TimeApprox. 1.5 hours (5V/2A)
Operating TemperatureCharging: 0°C-45°C (30°F-113°F)
Operating: -20°C-70°C (-4°F-158°F)
Storage Temperature-20°C-55°C (-4°F-131°F)
Camping Light Brightness & Duration60 lumens: 40 hours
200 lumens: 10 hours
600 lumens: 3 hours
Comparison table of Air 3, Air 3S, and Air 3SE models showing inflation speed, battery capacity, camping light, and warranty.
Figure 7: Model Comparison

User Tips

  • For Vacuum Bags: The AIR 3 is effective for vacuum-sealing travel bags and clothes. Ensure you use the correct nozzle for a tight seal.
  • Inflation Technique: When inflating items with spring-loaded valves, ensure the valve is fully open. The pump itself may not overcome the spring force if the valve is not properly engaged.
  • Noise Level: While compact, the pump can be loud during operation, especially at high speed. This is normal for its powerful airflow.
  • Camping Light Versatility: The integrated flashlight is bright and offers a warm light, making it suitable for various uses, including a night light at home or during camping.

Warranty and Support

2-Year Coverage

Within two years of purchase, ETENWOLF provides timely and effective online after-sale service. We will repair or replace any defective product (due to manufacturing fault) within this warranty period.

Contact Information

If you have questions or comments, or need help and support, please contact our customer service team:

The product is Made in P.R.C.

Additional Resources

A detailed user manual in PDF format is available for download. You can access it via this link: ETENWOLF AIR 3 User Manual (PDF).


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.