Introduction
Thank you for choosing the SmallRig Portable Carbon Fiber Travel Tripod Kit. This lightweight and versatile tripod is designed for photographers and videographers who require portability, stability, and flexible shooting options. Featuring a durable carbon fiber construction and a fluid video head, it is suitable for a wide range of cameras including DSLRs, mirrorless cameras, and action cameras. This manual provides essential information for the proper setup, operation, and maintenance of your tripod kit.
Package Contents
Please check the box to ensure all items are present:
- Tripod × 1
- Tripod Head × 1
- Short Center Column × 1
- Storage Bag × 1
- Guarantee Card × 1
Setup Instructions
1. Attaching the Tripod Head
The tripod head comes pre-attached. Ensure it is securely fastened to the tripod's 3/8"-16 UNC screw hole. If detached, align the screw hole on the tripod head with the screw on the tripod platform and rotate clockwise until tight.
2. Adjusting Tripod Height and Leg Angles
The tripod features 5-section legs and height lever locks for rapid adjustments.
- **Extend Legs:** Flip open the height lever locks on each leg section. Extend the legs to the desired height and then close the lever locks to secure them.
- **Adjust Leg Angles:** Use the leg angle locks at the top of each leg to set the desired spread. This allows for various stances, from narrow to wide, for increased stability or lower shooting positions.
3. Using the Short Center Column for Low-Angle Shooting
The independent short center column allows for effortless low-angle shooting. Follow these steps:
- **Detach Weight Hook:** Unscrew and detach the weight hook from the bottom of the main center column.
- **Rotate Video Head:** Rotate the video head downward at a 90° angle from the center column.
- **Remove Main Center Column:** Insert the allen wrench (attached to the hook) into the main center column and unscrew the internal screw to remove the main center column.
- **Install Short Center Column:** Replace the main center column with the short center column and secure it using the internal screw and allen wrench.
Operating Instructions
1. Mounting Your Camera
The tripod head is compatible with DSLRs, mirrorless cameras, and cages featuring a 1/4"-20 UNC screw hole or other Arca-Swiss quick release plates.
- **Attach Quick Release Plate:** Secure the quick release plate to the bottom of your camera or camera cage using the 1/4"-20 screw.
- **Mount Camera:** Open the Quick Release Plate Lock on the tripod head. Slide the camera (with the attached quick release plate) into the receiver on the tripod head. Close the Quick Release Plate Lock firmly to secure the camera.
2. Adjusting Pan and Tilt
The fluid video head offers smooth 360° pan and 160° tilt movements.
- **Pan Adjustment:** Loosen the Pan Lock knob to allow horizontal rotation. Tighten to secure the position.
- **Tilt Adjustment:** Loosen the Tilt Lock knob to allow vertical tilting. Tighten to secure the position.
- **Bowl Lock:** Use the Bowl Lock for fine-tuning the leveling of the head.
Maintenance
- **Cleaning:** Wipe the tripod and head with a soft, dry cloth after each use. For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid harsh chemicals.
- **Lubrication:** The fluid head is designed for smooth operation and generally does not require user lubrication. If movements become stiff, consult professional service.
- **Storage:** Store the tripod in its provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- **Inspection:** Periodically check all screws, locks, and joints for tightness. Tighten any loose components using the appropriate tools.
Troubleshooting
- Problem: Tripod legs are not extending or retracting smoothly.
- **Solution:** Check if the height lever locks are fully open or closed. Ensure no dirt or debris is lodged in the leg sections. Clean the leg sections if necessary.
- Problem: Camera is not stable on the tripod head.
- **Solution:** Ensure the quick release plate is securely attached to your camera and firmly locked into the tripod head. Verify that the Pan Lock and Tilt Lock knobs are tightened after positioning your camera. Check the tripod legs for stability and ensure all leg locks are engaged.
- Problem: Fluid head movement is stiff or jerky.
- **Solution:** Ensure the Pan Lock and Tilt Lock knobs are sufficiently loosened for movement. If the issue persists, clean the exterior of the head. Avoid disassembling the fluid head, as it contains specialized fluid and components.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 5028 (AP265C1-CH3) |
| Material(s) | Carbon Fiber, Aluminum alloy |
| Maximum Height | 1580mm (61.8in) |
| Folded Height | 480mm (18.9in) |
| Net Weight | 1.37Kg (3.03lb) |
| Load Capacity | 10.0kg (22.0lb) |
| Max Pole Diameter | 26.0mm (1.02in) |
| Min Pole Diameter | 12.0mm (0.47in) |
| Pole Sections | 5 |
| Fluid Head Pan Range | 360° |
| Fluid Head Tilt Range | 160° (-70° to 90°) |
| Fluid Head Weight | 271g (9.5oz) |
| Fluid Head Max Payload | 3kg (6.6lb) |
| Product Dimensions (L×W×H) | 84 × 84 × 485mm (3.31 × 3.31 × 19.09in) |
| Package Dimensions (L×W×H) | 93 × 91 × 509mm (3.66 × 3.58 × 20.04in) |
| Package Weight | 1.75Kg (3.86lb) |
| Compatibility (Tripod) | Ball heads, video heads, stabilizers, devices with 3/8"-16 UNC screw hole |
| Compatibility (Tripod Head) | DSLR, Mirrorless Camera, Cage with 1/4"-20 UNC screw hole, Arca-Swiss quick release plate |
User Tips
- Always ensure the tripod is placed on a stable, level surface before mounting your camera.
- For maximum stability, extend the thickest leg sections first and keep the center column as low as possible.
- When shooting in windy conditions, hang a weight (e.g., your camera bag) from the hook at the bottom of the center column for added stability.
- Practice adjusting the pan and tilt locks to achieve smooth camera movements for video recording.
- Before packing, ensure all locks are secured and the tripod is folded compactly into its storage bag to prevent damage.
Warranty and Support
SmallRig products are manufactured to high-quality standards. For warranty information, please refer to the Guarantee Card included in your package or visit the official SmallRig website. For technical support or service inquiries, please contact SmallRig customer service directly.