HWATEL 6-Band Universal Cellular Signal Repeater Amplifier Booster

Contents

HWATEL 6-Band Universal Cellular Signal Repeater Amplifier Booster User Manual

Model: 6-Band Universal Cellular Signal Repeater Amplifier Booster

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your HWATEL 6-Band Universal Cellular Signal Repeater Amplifier Booster. This device is designed to enhance 2G, 3G, 4G, and 5G cellular signals across multiple frequency bands (B28 700MHz, B20 800MHz, B8 900MHz, B3 1800MHz, B1 2100MHz, B7 2600MHz) in Europe, the Middle East, and Africa, improving both voice calls and data connectivity.

HWATEL 6-Band Universal Cellular Signal Repeater Amplifier Booster with supported European carriers and frequency bands

Figure 1: HWATEL 6-Band Universal Cellular Signal Repeater Amplifier Booster and supported bands/carriers.

Package Contents

Please check the package contents upon receipt to ensure all items are present:

  • 1 x HWATEL 6-Band Cellular Signal Booster
  • 1 x Power Adaptor

Note: Antennas and cables are NOT included and must be purchased separately.

Contents of the box showing the booster and power adaptor

Figure 2: Package contents (Booster and Power Adaptor).

Setup and Installation

Proper installation is crucial for optimal performance. Follow these steps carefully.

Step 1: Find the Position with the Strongest Signal

The coverage area of the booster is directly dependent on the strength of the incoming signal received by the outdoor antenna. Finding the strongest signal position for the outdoor antenna is MOST IMPORTANT.

Use a mobile device to measure signal strength. The ideal location is typically above the roofline, on the side of the structure facing the nearest cellular tower, and positioned as high as practical to ensure a clear line of sight. Optimal placement minimizes obstructions and maximizes signal strength and stability.

  • If the outdoor signal is less than 2 bars, the coverage area will be limited.
  • If the outdoor signal is less than 1 bar, the booster may not work effectively.

How to Measure Signal Strength (Example for iPhone):

  1. Dial *3001#12345#* then press call button.
  2. Choose All Metrics, click Serving Cell Info.
  3. Check Band, RSRP, and SINR.

How to Measure Signal Strength (Example for Android):

  1. Download and install the APP "Network Cell Info Lite", "Cellular-Pro" or "Cellular-Z".
  2. Check Band, RSRP, and SINR.

Step 2: Install the Outdoor Antenna

Mount the outdoor antenna at the location identified in Step 1. Ensure it is positioned above the roofline and at the highest practical elevation. The installation site should provide a minimum clearance radius of 3 meters, free from physical obstructions and other radiating or transmitting elements that may cause interference.

Raising the outdoor antenna or aligning it directly toward the serving mobile signal tower should result in an increase in received signal strength (RSRP), ideally reaching its optimal maximum level.

Key Tip: Adjust the direction of the outdoor antenna and continuously monitor the indoor signal with your cellphone to achieve optimal signal strength.

Diagram showing proper outdoor antenna installation above roofline, facing cell tower

Figure 3: Outdoor antenna installation diagram.

Diagram illustrating signal flow from cell tower to outdoor antenna, booster, and indoor antenna

Figure 4: Signal flow diagram.

Diagram showing correct and incorrect outdoor antenna placement relative to the cell tower and roof

Figure 5: Correct and incorrect outdoor antenna placement.

Step 3: Install the Indoor Antenna

The indoor panel antenna(s) should be mounted facing the area where signal coverage is required. It is essential that they are not directed toward the outdoor antenna.

ALERT! During indoor antenna installation, you must ensure that the indoor antenna is positioned far away from the outdoor antenna. They should be separated by a solid wall and installed back-to-back to maintain adequate isolation. Failure to maintain proper separation may result in loopback or signal noise. In such cases, the cellphone may indicate a strong or fluctuating signal; however, calls may still drop and data speeds may remain low.

Diagrams illustrating correct and incorrect indoor antenna placement to avoid loopback

Figure 6: Antenna separation guidelines to prevent loopback.

How to avoid loopback:

  • Outdoor and indoor antennas should be separated by two walls.
  • Outdoor and indoor antennas should be installed back-to-back.
  • Vertical distance between antennas should be over 13 feet.
  • Horizontal distance between antennas should be over 30 feet.

Step 4: Install the Signal Booster

When positioning the booster, select a location near a functional AC power outlet. Do not expose the signal repeater to excessive heat, direct sunlight, moisture, or sealed airtight enclosures.

  1. Connect the outdoor antenna cable to the port labeled “Outside” or “BTS” on the booster and tighten the connection securely.
  2. Connect the cable from the indoor antenna to the port labeled "Inside” or “MS” on the booster and tighten the connection securely.
  3. Connect the AC power adaptor cord to the signal booster to power on the booster.

Important: Adjust the indoor antenna and continuously monitor the indoor signal with your cellphone to ensure adequate coverage throughout all rooms.

Video 1: Installation demonstration and signal strength improvement test.

Operating Instructions

Once installed, the booster will automatically begin to amplify the cellular signal. The device features 6 LCD displays, providing real-time information on the outdoor signal strength and status for each supported frequency band.

Close-up of the 6 LCD displays on the booster showing signal strength and status for each band

Figure 7: 6 LCD Displays showing real-time signal strength and status.

Monitor these displays to ensure optimal signal reception and amplification. A stronger signal indicated on the LCDs corresponds to better indoor cellular coverage.

Maintenance

To ensure the longevity and optimal performance of your signal booster, follow these simple maintenance guidelines:

  • Keep the booster unit clean and free from dust. Use a soft, dry cloth for cleaning.
  • Ensure the booster is placed in a well-ventilated area, away from direct sunlight, excessive heat, and moisture.
  • Regularly check all cable connections to ensure they are secure and free from damage.
  • Avoid placing heavy objects on top of the booster or its cables.

Troubleshooting

If you experience issues with your signal booster, refer to the following common problems and solutions:

No Signal Improvement or Weak Signal:

  • Check Outdoor Signal Strength: Ensure the outdoor antenna is placed in a location with the strongest possible signal (at least 2 bars). If the outdoor signal is too weak (less than 1 bar), the booster may not function.
  • Antenna Alignment: Re-adjust the direction of the outdoor antenna towards the nearest cell tower. Use your mobile phone to find the best signal direction.
  • Cable Connections: Verify that all cables (outdoor antenna to booster, indoor antenna to booster, power adaptor) are securely connected and not damaged.
  • Antenna Separation: Ensure sufficient isolation between the outdoor and indoor antennas to prevent loopback. Refer to the "Setup and Installation" section for detailed separation guidelines (two walls, back-to-back, >13 ft vertical, >30 ft horizontal).

Loopback or Signal Noise:

If your phone shows a strong but fluctuating signal, or calls drop and data speeds are low, it might be due to loopback (feedback between antennas).

  • Increase Separation: Maximize the physical distance and barriers between the outdoor and indoor antennas.
  • Re-position Antennas: Ensure antennas are not facing each other directly.
  • Check for Obstructions: Ensure no new obstructions are blocking the signal path between the outdoor antenna and the cell tower.
Diagrams illustrating correct and incorrect indoor antenna placement to avoid loopback

Figure 8: Visual guide for avoiding loopback issues.

Specifications

FeatureDescription
Frequency Bands6 Bands:
  • B28: 700MHz (5G)
  • B20: 800MHz (5G, 4.5G)
  • B8: 900MHz (2G GSM)
  • B3: 1800MHz (4G DCS)
  • B1: 2100MHz (3G WCDMA)
  • B7: 2600MHz (5G, 4.5G IMT)
Boost2G, 3G Voice + 4G Network
Gain70 ± 3dB
CoverageUp to 500 Square Meters
Dimensions (L x W x H)200mm x 195mm x 20mm
Dimensions of the HWATEL signal booster: 200mm x 195mm x 20mm

Figure 9: Signal Booster Dimensions.

User Tips

  • Optimal Outdoor Antenna Placement: Dedicate time to finding the absolute best spot for your outdoor antenna. Even small adjustments can significantly impact performance. Use a signal strength app on your phone for precise measurements.
  • Antenna Isolation is Key: The most common issue is insufficient separation between indoor and outdoor antennas. Always ensure there are physical barriers and adequate distance as specified in the installation section.
  • Check All Connections: Loose connections are a frequent cause of poor performance. Double-check all coaxial cable connections to ensure they are hand-tight.

Warranty and Support

For any issues during installation or operation, please contact the HWATEL technical support team:

  • Address: Bldg 21, FengZeYingHe, Shangdi National High-Tech Park, Beijing, China, 100084
  • Website: www.hwatel.com
  • Email: info@hwatel.com / hwatel@foxmail.com
  • Phone Number: +86-18618303017
  • WhatsApp: +86-18618303017

A detailed user manual in PDF format is also available for download: HWATEL Signal Booster User Manual (PDF)

© 2025 HWATEL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.