Introduction
The Wancle 5-in-1 Immersion Hand Blender is a versatile kitchen appliance designed to simplify various food preparation tasks. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your new hand blender.

Parts and Accessories
Familiarize yourself with the components of your Wancle Hand Blender:
- Motor Unit: The main body containing the motor and controls.
- Blender Stick: Detachable stainless steel shaft with 4-blade system for blending.
- Chopping Bowl: 500ml capacity bowl for chopping.
- Chopping Bowl Lid: Lid for the chopping bowl, where the motor unit attaches.
- "S" Blade: Sharp blade for the chopping bowl.
- Whisk Holder: Attachment for the whisk.
- Whisk: For whipping and beating.
- Milk Frother Attachment: For frothing milk.
- Vessel (Beaker): 600ml Smoothie cup for blending and measuring.
- Switches I & II: Power buttons for operation.
- Turbo Button: For a quick burst of maximum power.


Important Safeguards
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before use.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electrical shock, do not immerse the motor unit, cord, or plug in water or other liquid.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- Unplug from the outlet when not in use, before cleaning, and before putting on or taking off parts. Allow to cool before handling.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or adjustment.
- The use of accessory attachments not recommended or sold by the appliance manufacturer may cause injuries.
- Do not use outdoors. This appliance is intended to be used in household and similar applications such as staff kitchen areas, farm houses, hotels, motels, and bed and breakfast environments.
- Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
- Always attach the plug to the appliance first, then plug the cord into the wall outlet. To disconnect, turn any control to "off", then remove the plug from the wall outlet.
- Do not use the appliance for other than its intended use.
- A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord. Extension cords are available and may be used if care is exercised in their use. If an extension cord is used:
a) The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance;
b) The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally; and
c) The extension cord should be a grounding-type 3-wire cord. - Sharp blades – handle with care.
- The hand blender is equipped with a thermal protection switch. If the hand blender suddenly stops during use, unplug it and wait about 30 minutes for it to reset.
Setup and Assembly
Your Wancle Hand Blender features a detachable design for easy assembly and cleaning. Ensure the appliance is unplugged before assembly or disassembly.
Assembling the Hand Blender
- Align the blender stick with the motor unit.
- Insert the blender stick onto the motor unit and twist gently until it locks securely into place.
Assembling the Chopper
- Carefully remove the plastic cover from the "S" blade. The blade is very sharp; always hold it by the upper plastic part.
- Place the "S" blade on the center pin of the chopping bowl. Press down the blade to secure it.
- Place the chopping bowl on the anti-slip base for stability.
- Place the food to be chopped into the chopping bowl.
- Place the chopping bowl lid onto the chopping bowl.
- Align the motor unit with the chopping bowl lid.
- Place the motor unit on the chopping bowl lid and twist until it locks.
Assembling the Whisk
- Insert the whisk into the whisk holder.
- Slot the whisk holder (gearbox) onto the motor unit and twist until it locks.
Operation
The Wancle Hand Blender offers 16 variable speeds and a Turbo Boost function for precise control over your blending tasks.

Using the Hand Blender
The hand blender is ideal for preparing dips, sauces, soups, mayonnaise, and baby food, as well as for mixing and milkshakes.
- Ensure the blender stick is securely attached to the motor unit.
- Introduce the hand blender into the measuring beaker or any other suitable vessel containing your ingredients.
- Plug the appliance into a power outlet.
- Press either Switch I or Switch II to operate. Adjust the speed using the variable speed control dial on top of the motor unit.
- For a quick burst of maximum power, press the Turbo button.
- After use, unplug the appliance, then press the ejection button to remove the blender stick.

Using the Chopper
The chopper is perfectly suited for hard foods such as meat, cheese, onions, herbs, garlic, carrots, walnuts, almonds, and prunes. Do not chop extremely hard foods like ice cubes, nutmeg, or coffee beans.
- Ensure the chopper is assembled correctly with the "S" blade and food inside the bowl.
- Plug the appliance into a power outlet.
- Press Switch I or Switch II to operate the chopper. During processing, hold the motor unit with one hand and the chopping bowl with the other for stability.
- After use, unplug the appliance, then press the ejection button to remove the motor unit.
- Remove the chopping bowl lid, carefully take out the "S" blade, and then remove the processed food from the chopping bowl.
Using the Whisk
Use the whisk only for whipping cream, beating egg whites, and mixing sponges and ready-mix desserts.
- Ensure the whisk is securely attached to the motor unit via the whisk holder.
- Place the whisk into a suitable vessel containing your ingredients.
- Plug the appliance into a power outlet.
- Press Switch I or Switch II to operate.
- After use, unplug the appliance, then press the ejection button to remove the whisk holder (gearbox). Pull the whisk out of the whisk holder.
Important Operation Notes:
- Do not hold the ON/TURBO button for longer than 60 seconds at any given time.
- Maintain a 3-minute rest time between two consecutive cycles to prevent overheating.
Care and Maintenance
Proper cleaning and maintenance will ensure the longevity and optimal performance of your Wancle Hand Blender.
Cleaning Instructions
- Always unplug the appliance before cleaning.
- Motor Unit: Clean the motor unit only with a damp cloth. DO NOT IMMERSE THE MOTOR UNIT IN WATER!
- Other Parts: The chopping bowl, beaker, blender stick, whisk, and milk frother attachment can be cleaned in the dishwasher.
- Blades: The blades are very sharp; handle with extreme care. After processing very salty foods, rinse the blades immediately.
- Discoloration: When processing food with strong colors, the plastic parts of the appliance may become discolored. Wipe these parts with vegetable oil before placing them in the dishwasher to help prevent staining.
- Detergents: Be careful not to use an overdose of cleaner or decalcifier in your dishwasher.
Troubleshooting
Here are solutions to common issues you might encounter:
- Appliance stops during use: The hand blender is equipped with a thermal protection switch. If it stops, unplug the appliance and wait about 30 minutes for it to reset before resuming use.
- Blender not powerful enough for frozen fruit: The blades are designed for general blending and chopping. For very hard items like frozen fruit, a dedicated high-power blender might be more suitable.
- Concern about scratching non-stick pans: To avoid scratching Teflon or other non-stick surfaces, it is recommended to use the immersion blender in plastic or stainless steel containers.
- Appliance not turning on: Ensure the appliance is correctly assembled and securely plugged into a working power outlet. Check for any damage to the cord or plug.
Specifications
| Feature | Detail |
|---|---|
| Model Number | HB-6008 |
| Power (W) | 1000W |
| Voltage | 220-240V |
| Frequency | 50Hz |
| Rotation Rate (RPM) | 15000 |
| Number of Speed Settings | 16 Variable Speeds |
| Blade Number | 4 |
| Blending Arm Material | Stainless steel |
| Chopper Material | Stainless steel |
| Housing Material | Stainless steel |
| Container Material | Plastic |
| Chopper Bowl Capacity | 500ml |
| Smoothie Cup Capacity | 600ml |
| Cord Length (m) | 1.5 |
| Controls Type | Push button |
| Features | Mashing, Multifunctional, With Chopper, With Whisk, Ice Crushing, Turbo Mode, Pulse mode, Anti-Splash, Detachable Design |
| Function | fruit&vegetable, Rice Paste, Corn Juice, Milk Tea & Jam, Fruit Juice, Meat Mincing, STIRRING, Egg Stirring, Milk Shake, Mixing |
| Certification | EMC, LFGB, ROHS, CE |
| Plug Type | EU PLUG/UK PLUG |


User Tips
- The "Turbo" button provides a quick burst of power, useful for tougher ingredients or finishing blends.
- The detachable design makes the hand blender easy to install, disassemble, and clean.
- For tasks requiring longer operation, such as whipping cream, use short intervals (e.g., less than 60 seconds) with brief rests in between to prevent overheating and ensure optimal performance.
- While the motor is powerful enough for mashing, consider using a separate potato masher attachment if available for best results.
- Always use the immersion blender head in appropriate containers (plastic, stainless steel) to avoid scratching non-stick cookware.
Warranty and Support
Your Wancle Hand Blender comes with a 1-year warranty, providing you with manufacturer's lifetime support. We are committed to providing professional and quick responses to any questions about your product.

For any inquiries or support, please contact customer service at support@wancle.net.
A detailed user manual in PDF format is also available for download: Wancle Hand Blender User Manual (PDF)