Lemorele R1000/R1010 Wireless HDMI Extender

Contents

Lemorele R1000/R1010 Wireless HDMI Extender User Manual

Brand: Lemorele | Model: R1000/R1010

1. Introduction

The Lemorele R1000/R1010 Wireless HDMI Extender is a 5G wireless video transmission system designed for low-latency, plug-and-play 1080P video streaming. It allows you to wirelessly transmit HDMI signals from your laptop, PC, camera, or other source devices to a TV, projector, or monitor.

This system supports a transmission range of up to 200 meters with a low latency of less than 50ms, making it ideal for various applications including presentations, live streaming, video production, and multi-screen monitoring.

For detailed instructions and specifications, you may also refer to the official User Manual (PDF).

Lemorele 200M Wireless HDMI Extender with TX and RX units

Figure 1: Lemorele Wireless HDMI Extender (TX and RX units)

Video 1: Product Overview and Features

2. Package Contents

Please check the contents of your package. The items included may vary depending on the specific model (R1000 or R1010) purchased.

2.1 R1000 (1 Transmitter + 1 Receiver)

  • Transmitter (TX) x1
  • Receiver (RX) x1
  • Antenna x2
  • User Manual x1
  • HDMI Adapter x1
  • 100cm USB C Cable x2
Package contents for 1TX and 1RX model

Figure 2: Package Contents (1TX + 1RX)

2.2 R1010 (1 Transmitter + 2 Receivers)

  • Transmitter (TX) x1
  • Receiver (RX) x2
  • Antenna x3
  • User Manual x1
  • HDMI Adapter x1
  • 100cm USB C Cable x3
Package contents for 1TX and 2RX model

Figure 3: Package Contents (1TX + 2RX)

2.3 Only RX Unit

  • Receiver (RX) x1
  • Antenna x1
  • User Manual x1
  • 100cm USB C Cable x1
Image of a single RX unit

Figure 4: Only RX Unit

3. Setup Instructions

The Lemorele Wireless HDMI Extender is designed for easy plug-and-play setup. Follow these steps to get started:

3.1 Basic Connection (1TX to 1RX)

  1. Plug the Transmitter (TX) unit into the HDMI port of your source device (e.g., laptop, PC, camera).
  2. Connect the Receiver (RX) unit to the HDMI input port of your display device (e.g., TV, projector, monitor).
  3. Ensure both TX and RX units are powered using the provided USB-C cables and a 5V2A power adapter (not always included, but highly recommended for stable performance).
  4. Wait for 5-10 seconds for the devices to automatically connect and project the screen. No further operation is required for initial setup.

3.2 Pairing Additional RX Units

If you have purchased additional RX units separately, they need to be manually paired with the TX unit:

  1. Ensure the TX unit is connected to your source device and powered on.
  2. Connect the new RX unit to a display and power it on.
  3. Press and hold the function button on the RX unit for over 5 seconds. A prompt will appear on the display interface.
  4. Release the button. The RX unit will attempt to pair with the Lemorele TX.
  5. Wait for the transmitter's indicator light to remain steady, confirming a successful connection.
Steps to pair an additional receiver unit

Figure 5: Pairing Additional Receiver (RX) Units

3.3 App Monitoring Setup (TuTuPlay)

The system supports app monitoring via the TuTuPlay application:

  1. Download and install the TuTuPlay APP from the App Store (iOS) or Google Play (Android) on your mobile device or tablet.
  2. Open the TuTuPlay application.
  3. Follow the prompts within the app to open the Wi-Fi settings on your computer or phone.
  4. Search for the Wi-Fi network named 'Tutuxxxx' (where 'xxxx' is a unique identifier) and connect to it. The password is 'tc584878'.
  5. Once connected, you can use the app for monitoring.
Connection steps for TuTuPlay app monitoring

Figure 6: TuTuPlay App Connection Steps

4. Operation

Once the transmitter and receiver units are successfully connected, the system will automatically transmit video and audio from your source device to the connected display(s).

4.1 Multi-Screen Casting

The Lemorele Wireless HDMI Extender supports one transmitter (TX) broadcasting to up to four receivers (RXs) simultaneously, providing a versatile multi-screen casting solution for various environments like classrooms or conference rooms.

Classroom setup with one transmitter and multiple receivers

Figure 7: Multi-Screen Casting in a Classroom Setting

4.2 App Monitoring (TuTuPlay)

The TuTuPlay app allows for real-time monitoring of the transmitted video feed on your smartphone or tablet. This is particularly useful for live streaming or video production scenarios where multiple individuals need to monitor the output.

App monitoring with TuTuPlay

Figure 8: Supports App Monitoring with TuTuPlay

5. Transmission Modes and Range

The effective transmission range varies depending on the number of receiver units connected to a single transmitter:

  • 1 Transmitter to 1 Receiver (1TX to 1RX): Up to 200 meters (656 feet)
  • 1 Transmitter to 2 Receivers (1TX to 2RX): Up to 130 meters (426 feet)
  • 1 Transmitter to 3 Receivers (1TX to 3RX): Up to 100 meters (328 feet)
  • 1 Transmitter to 4 Receivers (1TX to 4RX): Up to 100 meters (328 feet)
Diagram showing transmission ranges for different TX-RX configurations

Figure 9: Transmission Range by Configuration

6. Power Supply Requirements

It is crucial to use an adequate power supply for optimal performance.

Always use a 5V2A power adapter for both the transmitter and receiver units to ensure stable operation of the Wi-Fi module. Insufficient power can lead to various issues, including:

  • Unsuccessful screen casting
  • Connection lags or stuttering
  • Sudden disconnections
  • Display interface not showing SSID and password
Diagram illustrating the importance of 5V2A power supply

Figure 10: Importance of 5V2A Power Supply

7. Specifications

FeatureDescription
Brand NameLemorele
Connector TypeWireless
OriginMainland China
CertificationCE, RoHS, FCC
Video Resolution1080P@60Hz
Transmission Latency< 50ms
Wireless Standard2.4G/5G Dual-band Wi-Fi with Adaptive Frequency Hopping
Video CodecH.264
Max Transmission Distance (1TX+1RX)200 meters (656 feet)
Max Transmission Distance (1TX+2RX)130 meters (426 feet)
Max Transmission Distance (1TX+3/4RX)100 meters (328 feet)
Housing MaterialTitanium Alloy
Power Input5V2A (recommended)

8. Troubleshooting

If you encounter any issues while using your Lemorele Wireless HDMI Extender, please refer to the following common problems and solutions:

  • No Signal / Unsuccessful Screen Casting:
    • Ensure both the TX and RX units are properly connected to their respective devices (source and display).
    • Verify that both units are receiving sufficient power from a 5V2A power adapter. Insufficient power is a common cause for this issue.
    • Check that the HDMI cables (if used with adapters) are securely connected.
    • If using an additional RX unit, ensure it has been correctly paired with the TX unit as described in Section 3.2.
  • Connection Lags / Stuttering / Sudden Disconnection:
    • This is often due to insufficient power. Confirm both units are powered by a stable 5V2A source.
    • Reduce the distance between the TX and RX units. Obstacles like walls can also affect signal strength and range.
    • Ensure there are no strong Wi-Fi or other wireless interferences nearby. The device uses adaptive frequency hopping to mitigate this, but extreme interference can still impact performance.
  • Display Interface Not Showing SSID/Password (for App Monitoring):
    • This indicates a power issue. Recheck your power supply to ensure it meets the 5V2A requirement.
    • Restart the TX unit and the device running the TuTuPlay app.
  • RX Unit Cannot Be Used Alone:
    • The RX (receiver) unit is designed to work in conjunction with a TX (transmitter) unit. It cannot function as a standalone device for video transmission.
  • TX Unit Not Connecting to TuTuPlay App:
    • Ensure the TuTuPlay app is correctly installed and you are following the Wi-Fi connection steps (Section 3.3) precisely.
    • Double-check the Wi-Fi name ('Tutuxxxx') and password ('tc584878').

9. User Tips

  • Prioritize Power: Always use a dedicated 5V2A power adapter for both the transmitter and receiver units. This is the most common solution for connectivity and performance issues.
  • Optimal Placement: For the best transmission range and stability, try to minimize physical obstructions (walls, large furniture) between the TX and RX units.
  • App for Flexibility: Remember that the TX unit can be used independently if you utilize the TuTuPlay app on a smartphone or tablet as a receiver, offering a flexible monitoring solution.
  • Pairing is Key for Multiple RX: If expanding your setup with additional RX units, ensure you follow the manual pairing process carefully to establish a stable connection.

10. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact Lemorele customer service through your purchase platform or the official Lemorele website.

Please retain your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.