SANSUI TD46

Contents

Sansui TD46 ANC Wireless Bluetooth Headphones

Model: TD46

Your guide to an immersive audio experience.

Introduction

Thank you for choosing the Sansui TD46 ANC Wireless Bluetooth Headphones. These headphones are designed to provide a superior audio experience with advanced features such as -50dB Active Noise Cancellation, Bluetooth 5.4 connectivity, 360° Spatial Audio, and an impressive battery life. To ensure optimal performance and a pleasant experience, please read this manual carefully before use.

Video: Sansui TD46 Product Overview and Features

Package Contents

Ensure all items are present in your package:

  • TD46 Headphone × 1
  • User Guide × 1
  • Type-C Charging Cable × 1
  • External Microphone × 1
  • 3.5mm AUX Cable × 1
Diagram showing Sansui TD46 headphones, external Type-C microphone, 3.5mm audio cable, charging cable, and user manual.

Image: Sansui TD46 Package Contents

Product Overview

Familiarize yourself with the various components and controls of your TD46 headphones:

Headphone Components

  • ANC Indicator: Shows the status of Active Noise Cancellation.
  • ANC Active Noise Cancellation Dialing Button: Controls ANC and Transparency modes.
  • Charging Port: Type-C port for charging.
  • External Microphone Port: For connecting the detachable boom microphone.
  • Volume +: Increases volume.
  • Function Button: Multi-purpose button for power, playback, and calls.
  • Volume -: Decreases volume.
  • AUX Port: 3.5mm port for wired connection.
  • Microphone: Built-in microphone for calls.
  • Indicator Light: Displays various operational statuses.
Sansui TD46 headphones in black, highlighting the ANC feature and detachable mic.

Image: Sansui TD46 Headphones with Detachable Microphone

Setup

1. First Time Use

Before using your headphones for the first time, ensure they are fully charged. If the battery is low, use the provided Type-C charging cable to charge the device.

2. Bluetooth Pairing Connection

  1. Power On: Under the off state, long press the Function Key for 3 seconds. The headset will automatically power on and enter pairing mode.
  2. Search for Device: On your Bluetooth-enabled device (phone, tablet, computer), search for Bluetooth devices.
  3. Select 'SANSUI': From the list of available devices, select 'SANSUI' to connect.
  4. Complete Pairing: Once selected, the connection pairing will complete. A voice prompt will confirm successful connection.
  5. Reconnect: After the first successful connection, the headphones will automatically connect to the last paired device when powered on. (Note: Some devices may require '0000' as a pairing password).

3. Dual Connection

The Sansui TD46 supports connecting to two devices simultaneously. For example, you can connect to your phone and a computer or tablet at the same time. This allows for seamless switching between calls on your phone and media playback on your other device, or effortlessly resuming tasks.

Sansui TD46 headphones connected to a laptop and a smartphone, illustrating dual connection capability.

Image: Dual Connection Feature

Operating Instructions

1. Power On/Off

  • Power On: Under the off state, long press the Function Key for 3 seconds. The headset will automatically power on.
  • Power Off: Under the power on state, long press the Function Key for 5 seconds. The headset will automatically disconnect from Bluetooth and power off.

2. Music Playback Controls

  • Play/Pause Music: Click the Function Button.
  • Previous Track: Long press Volume -.
  • Next Track: Long press Volume +.
  • Volume Down: Click Volume -.
  • Volume Up: Click Volume +.

3. Call Management

  • Make a Call (Redial): Double-tap the Dialing Key (for end number replay).
  • Answer/Hang Up a Call: Click the Dialing Key.
  • Reject a Call: Long press the Dialing Key for 2 seconds.

4. ANC Mode/Transparency Mode

The ANC function button allows you to cycle through noise cancellation modes:

  • Single click: Activates Transparency Mode.
  • Single click again: Activates ANC Mode.
  • Single click again: Turns off ANC Mode, returning to normal mode.

Note: You need to turn on the Bluetooth headset before you can use the ANC active noise cancellation function.

5. Game/Music Mode

Triple click the Function Key to switch between Game Mode and Music Mode. A voice prompt will indicate the current mode.

6. Voice Control

Double-click on the Function Key to activate your device's voice assistant (e.g., Apple Siri Support, Google Assistant Support).

Diagram illustrating the three modes for multi-scene use: ANC Mode, Normal Mode, and Transparency Mode.

Image: 3 Modes for Multi-Scene Use

Battery and Charging

1. Headset Battery Indicator

The cell phone status bar can display headset device power information (requires cell phone version to support this feature).

2. Headset Charging Status

The indicator light will be blue during the charging process. The light will turn off when the headphones are fully charged.

3. Headphone Low Battery Alert

When the headset is in a low battery state, you will hear a voice prompt indicating that the battery is low. Please charge the headset promptly.

4. Wired Mode

The headphones can be used in wired mode even when powered off. Simply connect the provided 3.5mm AUX cable to the AUX port on the headphones and your audio source. This mode requires no power consumption from the headphone battery.

Image showing the Sansui TD46 headphones and highlighting 80 hours playtime (ANC off), 40 hours playtime (ANC on), and 2 hours charging time.

Image: Superior Battery Life

Indicator Status

The indicator light on your headphones provides visual feedback on its status:

  • Turn on power: Blue indicator light is on.
  • Shutdown: Hundred color indicator lights up and then goes out.
  • Waiting for pairing: White-blue indicator light blinks alternately.
  • Pairing success: Indicator light goes off.
  • Music status: Indicator light is off.
  • Call Status: Indicator light is off.
  • Gaming status: Blue indicator light with breathing light effect.
  • Low battery: White indicator light flashes and voice prompts.
  • Charging status: Blue indicator light is always on.
  • Charging complete: Indicator light is off.
  • ANC noise canceling mode on: Green indicator light is always on.

Troubleshooting (Common Problems)

  1. The headset can't be paired with the cell phone?
    Check whether the headset is paired or connected back, and check the Bluetooth search function of the phone.
  2. The headset cannot be turned on?
    Please check whether the power of the headset is sufficient, and charge it for 30 minutes before turning it on.
  3. Can the headphones replace the battery?
    No, this headset uses a non-removable built-in battery.
  4. Can I use this headset while driving?
    It is possible to use this headset while driving, but it is not recommended to use a headband Bluetooth headset while driving. Minimize the volume for safety.
  5. Headset disconnected with cellphone?
    The effective distance of this headset is 10 meters indoors. If the distance between the phone and the headset exceeds 10 meters or there are multiple obstacles, the headset and the phone will be disconnected. Please keep the effective distance within the use of this headset.
  6. After the headset is connected to the computer or mobile phone, hear a different sound?
    Since Bluetooth is a wireless technology, it is sensitive to objects between the headset and the connected device. Please check whether there is metal or other objects that affect the connection within the connection range.
  7. After the headset is connected to the mobile phone, can the headset be used to control the application on the mobile phone?
    The software settings of the device application may be different, so that the functions of individual applications are not supported by the headset.

Specifications

FeatureSpecification
Product NameTD46 ANC Bluetooth Headphones
Noise Reduction TypeActive Noise Reduction, Passive Noise Reduction
Bluetooth Version5.4
Connecting Distance≤15 Meters (barrier-free environment)
Product ColorBlack/White
Audio DecodingAAC/SBC
Playtime (ANC Off)Approx. 80 Hours
Playtime (ANC On)Approx. 40 Hours
Standby TimeApprox. 120 Hours
Net WeightApprox. 245g
Rated InputDC 5V
Speaker Size40mm
Resistance32Ω
Frequency Response Range20 - 20000Hz
Sensitivity122dB
Max Output30mW
MaterialABS, Plastic, Leather
Charging MethodCable (Type-C)

Precautions

To ensure safe and proper use of your Sansui TD46 headphones, please observe the following precautions:

  1. Do not disassemble, repair, or modify the headphones for any reason. This may cause fire, electronic breakdown, or complete damage to the product.
  2. Do not place the product in environments with extreme temperatures (below 0 °C or above 45 °C).
  3. When the product indicator light is on, do not look directly at it and keep it away from the eyes of children or animals.
  4. Do not use this device during thunderstorms, as thunderstorms may cause equipment malfunction or electric shock hazards.
  5. Do not use strong chemicals, cleaning agents, or strong detergents to clean the equipment or its accessories.
  6. Do not place the device near heat sources or exposed sources of fire, such as electric heaters, microwaves, ovens, water heaters, stoves, candles, or other places that may generate high temperatures.
  7. Do not listen to music at high volume for extended periods, as this may cause hearing damage. Adjust the volume to an appropriate level when using this device.
  8. Do not attempt to replace the battery yourself. This device is equipped with a non-removable built-in battery to prevent damage to the battery or device. Unauthorized replacement is not recommended.
  9. Do not expose magnetic stripe cards (such as bank cards, phone cards, etc.) to this device for a long time, as the magnetic field may cause damage to the card.
  10. Before cleaning and maintenance, stop using this device, close all applications, and disconnect all connections or cables to other devices.

User Tips

  • Microphone Quality: The detachable boom microphone is designed to improve voice clarity, especially for gaming and calls in noisy environments. Ensure it is securely connected for optimal performance.
  • Bluetooth Reconnection: If you experience difficulty reconnecting, try turning off and then on your phone's Bluetooth, or delete the 'SANSUI' pairing information from your device and re-pair.
  • Wired Mode for Battery Saving: Utilize the 3.5mm AUX cable for wired listening when battery is low or to conserve power, as this mode does not consume headphone battery.
  • ANC Effectiveness: The -50dB ANC is highly effective for reducing constant low-frequency noise like airplane engines or city traffic. For best results, ensure a good seal with the earcups.

Warranty & Support

For any issues, technical support, or warranty inquiries, please refer to the official Sansui website or contact the seller directly. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is available for download: Sansui TD46 User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.