1. Product Overview
The LS TH01 EWelink Smart Zigbee Temperature and Humidity Sensor is designed to monitor indoor environmental conditions in real-time. This compact device integrates seamlessly into your smart home ecosystem, providing accurate temperature and humidity readings, historical data, and smart automation capabilities. It requires a Zigbee hub for operation and is compatible with popular voice assistants like Amazon Alexa and Google Home Assistant.
2. Setup Guide
2.1 What's in the Box
- EWelink Smart Zigbee Temperature and Humidity Sensor (TH01)
- User Manual (this document)
Note: 2x AAA batteries and a Zigbee hub are NOT included and are required for operation.
2.2 Requirements
- A compatible Zigbee hub (e.g., Tuya Zigbee hub).
- 2x AAA batteries.
- eWeLink app installed on your smartphone or tablet.
- An active internet connection.
2.3 Installation Steps
- Insert Batteries: Open the battery compartment on the sensor and insert 2x AAA batteries, ensuring correct polarity.
- Power On: The sensor will automatically power on once batteries are inserted.
- Add Device to Zigbee Hub:
a. Ensure your Zigbee hub is powered on and connected to your network.
b. Open the eWeLink app (or Smart Life app if you prefer for certain features like family sharing).
c. Follow the app's instructions to add a new Zigbee device. This usually involves putting the hub into pairing mode and then activating the sensor's pairing mode (often by pressing a reset button for a few seconds).
d. Once detected, name your sensor and assign it to a room. - Integrate with Voice Assistants (Optional):
a. If you wish to use Alexa or Google Home, ensure your eWeLink account is linked to your Amazon Alexa or Google Home app.
b. Discover new devices in your Alexa or Google Home app.
3. Operating Instructions
3.1 Real-time Monitoring
Once connected, you can view the current temperature and humidity readings directly from the eWeLink app on your smartphone or tablet, anytime and anywhere.
3.2 Historical Data Storage
The sensor stores up to 30 days of historical temperature and humidity data. This data can be viewed as a graph within the app and can also be exported via email for further analysis.
3.3 Temperature Unit Switch
You can easily switch the temperature display unit between Fahrenheit (°F) and Celsius (°C) within the eWeLink app settings.
3.4 Voice Control
Control and inquire about your environment using voice commands through Amazon Alexa or Google Home Assistant. Examples:
- "Alexa, what is the temperature in the room?"
- "Google, what is the humidity in the living room?"
3.5 Family Sharing Control
Share control of the sensor with family members via the Smart Life app, allowing multiple users to monitor and manage the device.
3.6 Alarm Management
Set custom upper and lower limits for both temperature (-10℃ to 60℃) and humidity (0%-100% RH) within the app. You will receive notifications if the readings fall outside these set ranges, providing peace of mind.
3.7 Offline Notification
Receive notifications if the sensor goes offline, ensuring you are always aware of its operational status, even when you are not at home.
3.8 Intelligent Linkage
Create smart scenes and automations. For example, you can set a condition where if the indoor temperature reaches a certain threshold (e.g., 30°C), a connected smart air conditioner (requires a separate WiFi IR Remote) automatically turns on.
4. Maintenance
4.1 Battery Replacement
The sensor is powered by 2x AAA batteries. The app will provide a low battery notification when replacement is needed. To replace, open the battery compartment, remove old batteries, and insert new ones, observing polarity.
4.2 Cleaning
Wipe the sensor gently with a dry, soft cloth. Do not use liquid cleaners or abrasive materials, as this may damage the device or affect its accuracy.
4.3 Sensitivity Adjustment
You can manually set the temperature/humidity report cycle and adjust its sensitivity within the app. This helps in obtaining the most accurate detection values for your specific environment.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Sensor is offline | Low batteries, Zigbee hub disconnected, sensor out of range. | Check battery level and replace if necessary. Ensure Zigbee hub is powered and connected to the internet. Move sensor closer to the hub. |
| Inaccurate readings | Sensor placed in an unsuitable location (e.g., direct sunlight, near heat source), sensitivity settings. | Relocate the sensor to a more stable environment. Adjust sensitivity settings in the app. |
| Voice control not working | eWeLink/Smart Life account not linked to Alexa/Google Home, incorrect device name. | Verify that your eWeLink/Smart Life account is correctly linked in the Alexa/Google Home app. Ensure the device name is recognizable by the voice assistant. |
| No historical data | Sensor was offline or disconnected during the period. | Ensure the sensor maintains a stable connection to the Zigbee hub. |
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | TH01 |
| Brand Name | LS |
| Origin | Mainland China |
| Smart Home Platform | Alexa, Google Assistant |
| Battery Type | 2*AAA (Not Included) |
| Quiescent Current | ≤30uA |
| Low Voltage & Undervoltage | ≤2.7V |
| Wireless Protocol | Zigbee 3.0 |
| Zigbee Working Frequency | 2.400GHz-2.484GHz |
| Temperature Accuracy | ±1℃ |
| Humidity Accuracy | ±5%RH |
| Working Temperature Range | -10℃~+50℃ |
| Working Humidity Range | 10%-90%RH |
| Compatible App | eWeLink (Smart Life for some features) |
| Dimensions (L x W x H) | 7.2cm (2.834in) x 2.5cm (0.984in) x 2cm (0.787in) |
7. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the retailer directly. Keep your proof of purchase for any warranty claims.
8. User Tips
- Optimal Placement: For the most accurate readings, place the sensor away from direct sunlight, drafts, heating/cooling vents, and sources of moisture.
- Stable Network: Ensure your Zigbee hub has a strong and stable connection to your home network to prevent the sensor from going offline.
- Battery Monitoring: Regularly check the battery status in the app to ensure continuous monitoring and avoid interruptions.
- Automation Potential: Explore the intelligent linkage features to automate other smart devices based on temperature and humidity changes for a more comfortable and energy-efficient home.
