LEHX L3X

Contents

LEHX L3X Android Car Radio Multimedia System User Manual

Models: 7-inch, 9-inch, 10.1-inch Displays

1. Introduction

Thank you for choosing the LEHX L3X Android Car Radio Multimedia System. This manual provides detailed instructions for the installation, operation, and troubleshooting of your device. Please read it carefully before use to ensure proper functionality and a safe driving experience.

2. Safety Information

  • Always operate the device responsibly and in accordance with local traffic laws.
  • Do not attempt to operate the device in a way that distracts you from driving.
  • Ensure all wiring is correctly connected to prevent damage to the device or vehicle.
  • Professional installation is recommended to avoid improper wiring and potential damage.

3. Package Contents

The package typically includes the following components:

  • LEHX L3X Android Car Radio Multimedia System (7-inch, 9-inch, or 10.1-inch display)
  • Power Cable
  • RCA + MIC Jack
  • Camera Input / BT Antenna
  • GPS Antenna
  • Double USB Cable
  • Bracket (7-inch optional)
  • Frame (7-inch optional)
  • External Microphone (Gift)
LEHX L3X unit with included accessories
Figure 3.1: LEHX L3X unit and included accessories. Note the power cable, RCA+MIC jack, camera input/BT antenna, GPS antenna, double USB, brackets, and optional frame.

4. Setup and Installation

4.1. Pre-Installation Check

Before proceeding with the full installation in your car, it is highly recommended to test the unit. Due to potential impacts during transit, the product's functionality might be affected. Please test the machine to ensure it is working correctly before permanent installation.

4.2. Rear Interface Description (Power Plug)

Refer to the diagram for the power plug connections:

Rear interface wiring diagram for LEHX L3X
Figure 4.1: Detailed wiring diagram for the rear interface of the LEHX L3X unit.
  • White / White/black striped: Front speaker (L/R)
  • Gray / Gray/black striped: Front speaker (L/R)
  • Green / Green/black striped: Rear speaker (L/R)
  • Purple / Purple/black striped: Rear speaker (L/R)
  • Black (thick): GND (Ground Wire/B-)
  • Yellow: BATTERY (Constant Power Supply +12V)
  • Red: ACC (Ignition Switch)
  • Orange: ILLUMINATION (Illuminate Backlight)
  • Pink: REVERSE (Reversing camera control line)
  • Brown: KEY2 (Steering Wheel Control-2)
  • Orange/black striped: KEY1 (Steering Wheel Control-1)
  • Blue: ANT (Auto Antenna Power)

Important Notes:

  • When the yellow B+ line and the red ACC line have a 12V positive power simultaneously, the unit can be turned on normally.
  • The yellow B+ line keeps the power on, providing memory function to the machine.
  • For speaker cables, each cable must not be grounded, shared, or touch other lines. Failure to follow this may result in no sound output, distorted sound, or overheating of the machine.

4.3. CANBUS Connection

The CANBUS connection varies for high-end and low-end car models. Refer to the diagrams below:

CANBUS connection diagram for high-end car models
Figure 4.2: CANBUS connection for high-end car models. Disconnect (1) and Connect CANBUS (2).
CANBUS connection diagram for low-end car models
Figure 4.3: CANBUS connection for low-end car models. Connect (1) and Disconnect (2).

Attention: If the CANBUS box and black buckle are connected simultaneously, it may cause the radio to fail to shut down after the car is turned off.

4.4. Reversing Camera Installation

The reversing camera is an optional accessory. If installed, follow these steps:

Reversing camera installation diagram
Figure 4.4: Reversing camera wiring diagram and installation location.
  1. Yellow cable ①: Connect to the navigation reversing video input socket.
  2. Red cable ②: Connect to the reverse detection line of the navigation adapter (BACK or REVERSE).
  3. Connect ③ and ④ together: Then connect to the positive pole of the reverse light power supply.
  4. Black cable ⑤: Connect the body screw to the ground or the negative pole of the reverse light power supply.

If the reversing camera is not installed, do not connect the REVERSE/BACK cable to any place. Leave the cable unconnected. Otherwise, the machine will not display properly, or it will automatically enter the reverse mode, which will cause the machine to fail. In such a situation, disconnect the REVERSE/BACK line as soon as possible to avoid affecting the normal use of the user.

4.5. Boot Logo Customization

To change the boot logo:

  1. Go to Configuration.
  2. Navigate to Car Information.
  3. Select General.
  4. Choose Boot Logo.
  5. Enter the password (L6/L6Plus: 8888, L6Pro: 3368).
  6. Select your desired logo.

5. Operating Instructions

5.1. User Interface and Navigation

The LEHX L3X features an Android 14 operating system with multiple UI options and a QLED 1280*720 touch screen. Navigate through applications and settings using the intuitive touch interface.

Android smart universal machine with multiple UI options
Figure 5.1: Android smart universal machine with various UI options.

5.2. CarPlay & Android Auto

The device supports both Apple CarPlay and Android Auto for seamless smartphone integration.

Apple CarPlay (Supported Models Only)

  • Wired Connection: Connect your iPhone using a USB data cable. The CarPlay interface will launch automatically.
  • Wireless Connection: Enable Bluetooth and Wi-Fi on your iPhone. Connect to the device's Bluetooth. CarPlay will then automatically activate. (Note: The signal is transmitted via Wi-Fi. If Wi-Fi is off, CarPlay will disconnect.)

Android Auto (Supported Models Only)

This feature requires local Google Play services and may not be available in all countries.

  • Download and install the 'Android Auto' app from Google Play.
  • Use an Android 6.0 or higher phone with a valid data cable.
  • Wired Connection: Connect your Android phone using a USB data cable. The Android Auto interface will launch automatically.
  • Wireless Connection: Enable Bluetooth and Wi-Fi on your Android phone. Connect to the device's Bluetooth. Android Auto will then automatically activate. (Note: The signal is transmitted via Wi-Fi. If Wi-Fi is off, Android Auto will disconnect.)

5.3. Steering Wheel Controls

The unit supports original vehicle steering wheel controls. To program them:

Steering wheel control learning interface
Figure 5.2: Interface for learning steering wheel controls.
  1. Press and hold a button on your original car's steering wheel.
  2. On the device screen, find the button icon corresponding to the function you want to assign.
  3. Click the icon on the screen to change its color. This indicates successful learning.

Note: If your order includes a CANBUS, ensure the CANBUS type is correctly set for the buttons to function. Contact customer service for assistance if needed.

5.4. Multimedia Playback

  • Music: Play MP3, WMA, and other audio formats from USB or Bluetooth.
  • Video: Play MP4, AVI, and other video formats up to 1080p. Supports split-screen functionality.
  • Radio: Access FM radio stations.
  • Navigation: Utilize built-in offline maps (Navitel/Igo support) and online GPS services (Google Maps).
GPS + BeiDou positioning navigation system
Figure 5.3: GPS + BeiDou positioning navigation system interface.

5.5. Bluetooth Functions

Connect your phone via Bluetooth for hands-free calling and music streaming.

  • Phonebook: Access your phone's contacts directly from the device.
  • Music: Stream audio from your phone to the car stereo.

5.6. Display and Sound Settings

  • Button Light Color: Choose from 7 options for button light colors to match your mood or car interior.
  • Sound Settings: Adjust equalizer settings (Subw, Lo, Mid, Hi) and sound field (speaker balance).
Rainbow indicator light options
Figure 5.4: Customizable rainbow indicator light options.

Autolink (Mirrorlink) allows you to cast what's displayed on your phone to the car stereo, supporting both iPhone and Android devices.

MirrorLink for iPhone and Android Phone
Figure 5.5: MirrorLink functionality displaying phone content on the car stereo.

6. Maintenance

  • Keep the screen clean using a soft, dry cloth.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
  • Ensure proper ventilation around the unit, especially if a cooling fan is installed.
Cooling fan comparison for car radio
Figure 6.1: Comparison of uncooled vs. cooled car radio units, highlighting the importance of heat dissipation.

7. Troubleshooting

7.1. Cannot Boot Normally

  1. Wiring Check: Ensure the yellow, red, and black wires are correctly connected. Yellow to positive, red to key control, black to negative. Incorrect or loose connections will prevent booting.
  2. Original Car Wiring: Do not connect the original car wiring directly to the unit if colors do not match standard. Incorrect wiring can cause damage.
  3. Fuse Check: If the unit doesn't boot, check the fuse on the yellow wire. If the fuse is intact, twist the yellow and red wires together, turn the key, and press the power button to test.
  4. Repeated Fuse Blows: If the fuse blows repeatedly, it indicates a short circuit in the unit's protection circuit. The unit may require professional repair.

7.2. Automatic Shut-down

  1. Cable Error: If the blue (automatic antenna power supply) cable is connected to the unit's power cable, automatic shutdown will occur. Correct the wiring.
  2. Unstable Voltage: Test the power supply with a 12V-5A source. If it still shuts down automatically, the unit may have a problem.

7.3. Noise Issues

  1. Speaker Power: If the original speaker power is too low, noise may occur at high volumes. Avoid excessively high volume.
  2. Grounded Speaker Cable: Ensure speaker cables are not grounded. Connect the iron speaker cable directly to the unit's speaker cable.

7.4. Remote Control Not Working

Test the remote control by pointing it at a mobile phone camera and pressing a button. If the phone camera shows a light, the remote is working. If not, replace the battery.

7.5. Settings Not Saved (No Memory)

  1. The yellow and red wires are connected together (yellow to positive, red to key control).
  2. If yellow and red wires are reversed, simply swap their positions.

7.6. Bluetooth Not Working

Turn on the machine, search for its Bluetooth name on your mobile phone, and click 'Connect'. After connecting, you should be able to make calls and play music.

7.7. Product Emits Smoke

Replace the FUSE. If the problem persists, the internal circuit is likely burned. Professional after-sales service is required.

7.8. Sound Cannot Be Adjusted

  1. Reset the unit or unplug and replug the power cord.
  2. If the volume knob is broken, it needs to be replaced.

7.9. Reversing Camera Not Displaying

  1. Wiring: Check for incorrect or missing wiring.
  2. Camera Fault: If the camera is properly wired but not lighting up, it may be broken and needs replacement.

7.10. USB Devices Not Playing

Format the USB flash disk to FAT32. Re-download songs and try again. If the issue persists, replace the USB flash drive.

7.11. FM Radio Not Receiving Stations

  1. Ensure the antenna plug is fully inserted and the antenna line is not disconnected.
  2. Use the 'AS' button to auto-search for stations.
  3. If the above steps don't work, try inserting a screwdriver or metal strip into the antenna port instead of the antenna.

7.12. No Sound Immediately After Installation

This usually indicates a wiring error or a short-circuited original car speaker wire. Check the speaker cables for short circuits and reconnect if necessary. Verify that the number of speaker cables matches the original car wiring (e.g., 2 speakers need 4 cables).

7.13. No Sound After A While

Disconnect all speaker cables from the unit (do not remove them). Connect an external speaker to the gray and purple tail lines. Test for sound. If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is broken.

8. Specifications

FeatureSpecification
Brand NameLEHX
ModelL3X
Operating SystemAndroid 14
RAMUp to 8G
ROMUp to 256G
Display Size7", 9", 10.1"
ResolutionQLED 1280*720
Touch ScreenYes
Built-in ScreenYes
DinDouble Din
Voltage12 V
Out Power50x4
Item Weight1kg
Item Size230*130*220 mm
Special FeaturesBuilt-In Speaker/Microphone, WiFi function, Steering Wheel Control, 4G Network, Built-in GPS, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen
Digital Media FormatCD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG
OSD LanguageChinese (Simplified/Traditional), Albanian, Arabic, Azeri, Irish, Estonian, Belarusian, Bulgarian, Icelandic, Polish, Persian, Danish, German, Russian, French, Filipino, Finnish, Georgian, Haitian Creole, Korean, Dutch, Galician, Catalan, Czech, Croatian, Latin, Latvian, Lithuanian, Romanian, Maltese, Malay, Macedonian, Norwegian, Portuguese, Japanese, Swedish, Serbian, Slovak, Slovenian, Swahili, Thai, Turkish, Welsh, Ukrainian, Hebrew, Greek, Spanish, Hungarian, Armenian, Italian, Yiddish, Hindi, Urdu India, Indonesia, English, Vietnamese (supports 46 countries)
OriginMainland China
For Vehicle Brands/ModelUniversal (Toyota, VW, Hyundai, Kia, Honda, LADA, FIAT, Jeep)
CertificationCE
MaterialABS+
Subwoofer OutputSupport
AV-OUTWiFi version support
RCA Cable7 channels including subwoofer cable
Rear View Camera InputSupport (Free Gift)
Input Interface2*USB, RCA, Bluetooth
WIFIBuilt-in
MicrophoneBuilt-in (external microphone optional)
GPS Navigation MapBuilt-in offline map free update (support Navitel/Igo)
Bluetooth Phone BookSupport
Bluetooth MusicSupport
Warranty1 year

9. User Tips

  • Android Version: The device runs on Android 14.
  • Screen Size: Available in 7-inch, 9-inch, and 10.1-inch options. Please refer to the specifications for exact dimensions.
  • Included Accessories: The package includes USB cables, WiFi antenna, and GPS antenna. Two USB port cable adapters are included.
  • FM/RDS: The radio supports FM. RDS functionality is not explicitly listed but FM is confirmed.
  • YouTube Functionality: YouTube is fully functional on the device.
  • 360 Panoramic View Camera: While an AHD HD Camera is optional, specific connections for a 360 panoramic view camera system are not detailed. Please contact customer service for compatibility and setup if you plan to use one.
  • Developer Menu Password: For advanced settings or developer menu access, please contact customer service for the password.

10. Warranty and Support

The LEHX L3X comes with a 1-year warranty.

If you need more help or encounter any questions about the product, delivery, or service, please feel free to contact our customer service. We are a professional and responsible factory and will reply quickly to assist you.

Important:

  • Professional installation is highly recommended. We are not responsible for any damage that may occur to the car dashboard during device installation.
  • If the device is updated, the functions are subject to change without prior notice.
QR codes for customer service and social media
Figure 10.1: Contact customer service via WhatsApp or social media for further assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.