BAOFENG DM-32

Contents

Baofeng DM-32 DMR Digital Walkie Talkie Instruction Manual

Model: DM-32UV

1. Introduction

Thank you for choosing the Baofeng DM-32UV Dual Band Digital DMR and Analog two-way radio. This radio incorporates advanced technology to provide reliable communication. It supports both DMR digital and analog communication, featuring an innovative DMR digital processing system for SMS, high-audio quality, and digital encryption. The DM-32UV offers great stability, reliability, long-distance communication, a fashionable design, and compact exterior lines. Key features include Text Messaging, Record, Digital Encryption, Emergency Alarm, Work Alone, GPS, APRS Location Reporting, Roaming, Analog DTMF, 2TONE, 5TONE, and CTCSS/DCS encode/decode functions.

2. Safety Information

2.1 Intended Use

This product is designed for reliable wireless communication across various industry sectors. For safe and optimal performance, use the product as intended:

  • Users should have full knowledge of RF exposure and control it to meet occupational limits (FCC/ICNIRP and international standards).
  • All security instructions in this document must be followed.
  • General, national, and in-house safety regulations must be heeded.
  • The product must be exclusively used with frequencies licensed by the respective authority.
  • The product must be configured appropriately by the dealer.
  • Operators should be well-trained and familiar with applicable standards, regulations, and provisions.

2.2 RF Radiation Safety

Radio Frequency (RF) is electromagnetic radiation used in communication. For safety, pregnant women and individuals with personal medical devices (e.g., cardiac pacemakers, hearing aids) should take appropriate measures to avoid increased electromagnetic radiation. The operator is responsible for assessing and mitigating radiation exposure risks.

2.3 Precautions for Portable Terminals

To prevent property loss, bodily injury, or death, observe the following safety instructions:

  • Do not operate the product in locations with fuels, chemicals, explosive atmospheres, or other flammable/explosive materials. Only approved Ex-protection models are allowed, and assembly/disassembly is strictly prohibited.
  • Do not operate near blasting areas or medical/electronic equipment vulnerable to RF signals.
  • Do not hold the product while driving.
  • Do not operate where wireless communication equipment is completely prohibited.

2.4 Important Tips

  • Do not use unauthorized or damaged accessories.
  • Keep the product at least 2.5 centimeters away from your body during transmission.
  • Avoid prolonged listening at high volume.
  • In vehicles with airbags, do not place the product over the airbag or in its deployment area.
  • Keep the product and accessories out of reach of children and pets.
  • Operate the product within the specified temperature range.
  • Continuous transmission may cause heat accumulation. Allow it to cool properly.
  • Handle the product with care.
  • Do not disassemble, modify, or repair the product or its accessories without authorization.

2.5 Precautions for Batteries

Charging Prohibitions

  • Do not charge or replace the battery in locations with fuels, chemicals, explosive atmospheres, or other flammable/explosive materials.
  • Do not charge a wet battery; dry it with a soft, clean cloth first.
  • Do not charge a battery that is deformed, leaking, or overheating.
  • Do not charge with an unauthorized charger.
  • Do not charge in locations with strong radiation.
  • Avoid overcharging, as it may shorten battery life.

Maintenance Instructions

  • Clean accumulated dust from charging connectors regularly with a clean, dry cloth.
  • Charge the battery between 5°C and 40°C (40°F - 105°F). Charging outside this range may reduce battery life or cause leakage.
  • Turn off the radio before inserting it into the charger for a full charge.
  • Do not remove the battery or unplug the power cord during charging to ensure a smooth process.
  • Do not dispose of the battery in fire.
  • Do not expose the battery to direct sunlight or other heat sources.
  • Do not squeeze, penetrate, or remove the battery housing.

Transportation Instructions

  • Damaged batteries must not be transported.
  • Separate batteries from metal parts to avoid short circuits during transport.
  • If the battery is attached, the radio must be switched off and secured against switch-on.

2.6 Precautions for Disposal

Once the service life of the product (including radios and batteries) has ended, they should not be disposed of as household garbage. Recycling and disposal must comply with local regulations.

3. Packing List

Unpack the radio carefully and identify the items listed below. If any items are missing or damaged, contact your dealer.

Standard package contents for Baofeng DM-32 radio

Figure 1: Standard Package Contents

Table 1: Included Items
ItemQuantity (PCS)ItemQuantity (PCS)
Radio1Antenna1
Battery1Radio Case1
Charger1Instruction Manual1
Power Adapter1

Check if the frequency band on the antenna label matches that on the radio label. If not, please contact your dealer.

4. Setup

4.1 Installing / Removing the Antenna

  • Installing: Screw the antenna into the connector on top of the transceiver by holding the antenna at its base and turning it clockwise until secure.
  • Removing: Turn the antenna counter-clockwise to remove it.

4.2 Battery Installation and Removal

  • Installation: Align the battery parallel to the radio body, ensuring the lower edge is about 1-2cm below the radio's edge. Slide the battery upward along the rails and lock the fastening screws.
  • Removal: Loosen the captive screws until they are free from the radio, then slide the battery downward until it is free from the radio body.
  • Before installing or removing the battery, ensure the radio is completely turned off by turning the power/volume knob counterclockwise.

4.3 Installing the Additional Speaker/Microphone (Optional)

Pry open the rubber MIC-Headset jack cover and insert the Speaker/Microphone plug into the double jack.

Diagram showing speaker/microphone jack dimensions

Figure 2: Speaker/Microphone Jack Dimensions (Image not available, refer to manual for diagram)

5. Charging and Battery Care

5.1 Charging the Battery Pack

The Li-ion battery pack is not charged at the factory; please charge it before first use. For optimal performance, fully charge/discharge the battery two or three times. Replace the battery pack if operating time decreases significantly after full charge.

5.2 Charger Supplied

Use only the specified Baofeng charger. Other chargers may cause explosion or personal injury. If the radio displays low battery (red flashing lamp or voice prompt), charge the battery.

5.3 How to Charge

  1. Plug the AC Adaptor into the AC outlet and its cable into the DC jack on the charger. The indicator light blinks orange, ready to charge.
  2. Plug the battery or the radio into the charger. Ensure good contact. The indicator light turns red (charging begins).
  3. Full charge takes approximately 2-5 hours. When the lamp lights green, charging is complete. Remove the battery or radio.

Note:

  • When charging a radio (with battery) while powered on, the indicator may not turn green to show full charge. For proper indication, turn off the radio. The radio consumes energy when powered on, affecting accurate battery voltage detection by the charger.
  • It is recommended to power OFF your radio while charging. If powered on, you may not be able to transmit if the battery is completely empty. Allow time for the battery to charge to 1 bar before attempting to transmit.
  • For optimal battery life, remove the radio from the charger within 6 hours. Do not store the radio connected to the charger.

LED Indicator Status

StatusLED
No BatteryGreen and red alternately flashing
Charge NormallyRed
Fully ChargedGreen
TroubleRed blinks fast for a long time

NOTE: Trouble indicates battery too warm, battery short-circuited, or charger short-circuited.

5.4 Using the Type-C Charger

The Type-C charger allows convenient charging of your Li-ion battery pack.

Radio showing Type-C charging port with icons for USB, Car, Power Bank

Figure 3: Type-C Charging Options

  1. Ensure your radio is turned OFF.
  2. Plug the Type-C cable into the Type-C charging port on your battery. Connect the other end to a wall power outlet.
  3. An empty battery will be fully charged in 4 hours.
  4. The battery meter on the LCD will move to indicate charging.

5.5 Extending Battery Life

  • Charge the battery only at normal room temperature.
  • Turn off the radio when charging on the radio to speed up charging.
  • Do not unplug the charger or remove the battery/radio until charging is complete.
  • Do not charge a wet battery.
  • The battery will drain over time. If operating time is greatly reduced, consider a new battery.
  • Below freezing temperatures reduce battery performance. Keep a spare battery in cold environments.
  • Clean battery contacts with a clean cloth to ensure proper contact.
  • If the battery becomes wet (light splashes), remove it, dry with a towel, and place it in a plastic bag with desiccant overnight.

5.6 How to Store the Battery

  • Store the battery at approximately 80% discharged.
  • Keep it in a low-temperature, dry environment.
  • Keep it away from hot places and direct sunlight.
  • Do not short-circuit the battery terminals.
  • Never attempt to remove the casing from the battery pack.
  • Never store the battery in unsafe surroundings, as a short may cause an explosion.
  • Do not put the battery in a hot environment or throw it into a fire.

6. Radio Overview

This section familiarizes you with the external structure and programmable key functions of the unit.

6.1 Product Illustration

Diagram of Baofeng DM-32 radio with numbered parts

Figure 4: Baofeng DM-32 Product Diagram

  1. Antenna
  2. Channel Switch
  3. LED Status Indicator
  4. POWER/VOL Knob
  5. 2" LCD Display
  6. PTT Button
  7. SK1-Customized SideKey
  8. SK2-Customized SideKey
  9. Numeric keys (0-9)
  10. MIC Input
  11. Charge Contacts
  12. Speaker
  13. Speaker/Mic Jacks
  14. Type-C charge port

6.2 Key Functions

KeyFunctionality
[PTT] Transmit KeyPress to transmit, speak into microphone; release to receive.
SK1-Customized SideKeyDefault short press: radio function. Default long press: emergency alarm switch.
SK2-Customized SideKeyDefault short press: monitor function. Default long press: power switch key.
P1-Customized function keyDefault short press: [V/M] to switch frequency/channel mode. Default long press: toggle display mode (frequency, channel name, or channel number).
P2-Customized function keyDefault short press: [A/B] screen (main/sub-frequency) to toggle up/down. Default long press: dual-frequency guard mode switching.
0-9 Numeric keyInput numbers, DTMF codes, select punctuation/letters (Pinyin Input Method). Long press for numeric shortcut function.
Menu/Confirm keyShort press: activate menu mode, select items. Long press: enable one-touch function (after CPS setting).
Back/Delete keyMenu mode: return to previous menu or exit. Long press: switch channel mode (MR) or frequency mode (VFO). SMS editing: clear inputted information.
Up keyMR mode: change channel upwards. SMS editing: move cursor left.
Down keyMR mode: change channel downward. SMS editing: move cursor right.
[*] keyPress and hold: keypad locks on/off. DTMF function: indicates * code word.
[#] keyInput method interface: switch input method. Digital mode: short press for manual dialing, # key for individual/group call. Analog mode: DTMF dialing.

6.3 Status Indication

LCD Icon Summary

IconDescriptionIconDescription
Digital Encryption OnMain band.
Battery level indicatorUnread short message(s).
Positioned successfullyInbox is full.
Position turn on, but not successful.VVOX enabled
Radio transmits/receives through repeaterDouble Slot turn on
+Frequency shift direction enabled in MRH/M/LTX power: High/Low/Middle Power
--Frequency shift direction enabled in MRDWDual Watch Activation
Monitor is turned onDCSDCS enabled
Record function is turn onCTCTCSS enabled
VFOWorks in frequency modeScan stays on non-priority channels
CH AUnder call interface, TX or RX in A bandCH BUnder call interface, TX or RX in B band
Radio stays on priority channel 1.Radio stays on priority channel 2.
Digital mode, incoming call indicationDigital mode, call origination instructing
Radio Silent turn onNNarrowband enabled (Analog mode)
DIGProvides digital communication servicesANAProvides analog communication services
D+AMixed digital, allows reception of both analog and digital signals, TX is digitalA+DMixed analog, allows reception of both analog and digital signals, TX is analog

LED Indications

The top LED helps identify the current radio status:

LED IndicatorRadio Status
Glows redTransmitting
Glows greenReceiving
Flashes orange slowlyScanning

7. Basic Operations

7.1 Power On/Off

  • Power On: Turn the [Power/Volume] switch clockwise until a click is heard. The LCD will show a start-up message, and you will hear a beep after three seconds.
  • Power Off: Turn the [Power/Volume] switch counterclockwise until a click is heard. The LCD screen will display "Powering Down...".

7.2 Adjust Volume

Rotate the [Power/Volume] knob: clockwise to increase, counterclockwise to decrease. The LCD will show the volume status.

7.3 Main Band/Sub Band Switch

Press the Menu/Confirm key icon key to switch the main channel if two channels are displayed. The band indicated by the Main band icon icon is the main band.

  • ANA: Analog format.
  • DIG: DMR digital.
  • A+D: Mixed analog and DMR digital.
  • D+A: Mixed DMR digital and analog.

7.4 VFO/Channel Switch

Press and hold the Menu/Confirm key icon key to switch between VFO and channel display. Frequency mode will display the VFO symbol.

7.5 Set Up VFO Frequency

  1. Turn the radio to VFO mode, then press the Menu/Confirm key icon key to switch to the main band.
  2. Press the Up/Down keys or turn the channel selector to adjust the VFO frequency steps.
  3. Alternatively, input the VFO frequency directly via the keyboard (e.g., for 432.5625 MHz, enter [4][3][2][5][6][2][5]).

7.6 Select a Zone

Zones help manage channels by grouping them. The DM-32UV DMR radio has 250 Zones, each with up to 64 analog and/or digital channels.

  • Method 1: Press the pre-programmed [Zone Up] or [Zone Down] key to select a zone.
  • Method 2 (Menu):
    1. Press the Menu/Confirm key icon key to enter Main Menu -> Zone.
    2. Press the Menu/Confirm key icon key, then press Up/Down keys to select a zone.
    3. Press the Menu/Confirm key icon key to enter and then press Up/Down to select "Apply".

7.7 Select a Channel

Press and hold Menu/Confirm key icon key to switch the radio between VFO and Channel mode, select Channel mode.

  • Operation 1: Turn the channel switch to select a channel.
  • Operation 2: Input the channel numbers by the keyboard (e.g., for channel 64, input 0+6+4).

7.8 New Channel (Manually Programmed)

To create new channels:

  1. Press and hold the Menu/Confirm key icon key to switch to channel mode.
  2. Press the Menu/Confirm key icon key to enter Main Menu -> Setting -> Channel Set -> New Channel.
  3. Select Analog, Digital, A+D, or D+A Channel Type.
  4. Enter the channel alias and confirm.
  5. Enter the Rx frequency and confirm.
  6. Enter the Tx frequency and confirm.
  7. Prompts “Add success” and returns to the previous menu.

8. Advanced Features

8.1 Calling Services

Digital Calls

You can originate or receive the following types of calls on a digital channel:

  • Private Call: A call from a single user to another single user.
  • Group Call: A call from a single user in a group to all other members of the group.
  • All Call: A call from a single user to all other users on the current channel. (Dealer can enable All Call feature).

Making a Call

  • Turn the channel switch to choose a programmed channel. Press and hold the [PTT] key to make a call directly to a pre-programmed contact.
  • Select "Contacts List" in the "Talk Group" menu, select a contact, then press and hold the [PTT] key.
  • Select "Call Log" in the main menu, enter Missed/Answered/Sent call list, select a call log, then press and hold the [PTT] key.
  • Select "Talk Group > Manual Dial" in the main menu, press [#] key to switch between private call number or group call number, enter the number, then press and hold the [PTT] key.
  • If the dealer configures the call object of [Call] as a personal or group call contact, press the pre-programmed [Call] key and then press and hold down the [PTT] key.
Diagram showing proper radio holding for transmission

Figure 5: Proper Radio Holding for Transmission (Image not available, refer to manual for diagram)

Hold the radio vertically 2.5-5cm from your mouth, press the [PTT] key to start the call. The red LED lights up, and the receiver ID/name/city/state/country/call type and call out icon will display on the LCD. Release [PTT] key to receive the reply.

Receiving and Replying to Calls

In digital mode, the radio can receive and respond to calls with the same frequency/color code/time slot. When receiving a call:

  1. If the caller DMR ID is a programmed ID in the receiver's digital contact list, the radio will ring briefly.
  2. The LCD screen will display corresponding DMR ID/alias/city/state/country/call type and inbound icon.
  3. The green LED lights up.
  4. Reply by pressing and holding the [PTT] key after the other party has finished.

Ending a Call

  • Private Call / Group Call: Ends when no one presses [PTT] and call hold time expires.
  • All Call: Ends when the caller releases the [PTT] key.

8.2 Monitor

In standby, press the pre-programmed [Monitor] key to enter Monitor. This function allows monitoring weak signals or signals with unmatched IDs. Press the [Monitor] key again to shut off the speaker and return to standby.

Note:

  • In analog mode, if no signal, it will emit noise when [Monitor] Key is pressed.
  • The Monitor icon icon is seen when monitor is activated.

8.3 Emergency Alarm

The emergency alarm function is triggered by pressing the [Alarm] key when the channel is configured with an alarm system. Alarm types (programmable via CPS):

  • None: Alarm function disabled.
  • Siren only: Alarm tone given locally; control center does not receive signal.
  • Normal: Alarm state with sound and visual indication.
  • Secret: Alarm state without sound and visual indication.
  • Secret with voice: Alarm state without sound/visual indication, except for sound released if a call is received.
  • Alarm siren: Local alarm tone emitted after sending emergency alarm signal to control center. Audible and visual indications.

Press pre-programmed [Alarm] key to turn on/off emergency alarm function.

8.4 Work Alone

If an unforeseen situation occurs during a solo job and the radio is not operated within the pre-programmed time, it will automatically alert and inform a companion or control center. Press the pre-programmed [Work Alone] key to turn on work alone. Response time (1-256 minutes), reminder time (1-256 seconds), operating mode, and tone selection are set through CPS programming software.

8.5 Man Down Alarm

The radio has a Man Down function. If activated and the radio is not corrected within the “Man Down Delay Time” after tilting, or remains stationary, it will send an alarm status message to the alarm number. Moving or righting the terminal exits the emergency alarm. Press the pre-programmed [Man Down] key to turn on the Man Down function. The Man Down delay time is set through CPS programming software.

8.6 FM Radio Functions

To turn on/off the radio:

  • Press the Menu/Confirm key icon key to enter main menu -> Settings -> Radio Settings -> Key Function -> Customize any SK1/SK2/P1/P2 key as [FM Radio].
  • Press the pre-programmed [FM Radio] key to turn the radio on/off.

After turning on the radio function, search for stations:

  1. Press the Menu/Confirm key icon key to switch radio band (65-76M or 76-108M).
  2. Press the [#] key to enter radio station search mode (screen displays 'Seek...').
  3. Press Up/Down key to select radio channel by preset step frequency.
  4. Directly input familiar radio station frequency via numeric keys (e.g., 96.9MHz, input 0969).
  5. Short press the preset [FM Radio] function key or Menu/Confirm key icon key to exit radio mode.

8.7 Keypad Locking and Unlocking

The radio has manual and automatic keypad locking modes.

  • Manual: Press the pre-programmed [Keypad Lock] key to lock the keypad.
  • Automatic: To enable, press the Menu/Confirm key icon key to enter Main Menu -> Settings -> Radio Settings -> Key Functions -> Key Lock -> Switch. Select “Delay Time”, then press Up/Down key to set the delay time.
  • Unlock: Press the Menu/Confirm key icon key, then press * to unlock.

8.8 Keyboard Input

You can input user alias, numbers, SMS, etc., using the keypad. Supports English, Pinyin, and numeric input methods.

  • To switch input method (alphabet/numeric): Press [#].
  • To enter special characters: Press [1] in alphabet mode.
  • To enter a space: Press [0] in letter mode.

Note:

  • During input, if no content in the editing area, press the Menu/Confirm key icon key to return to the previous menu.
  • If content exists, press the Menu/Confirm key icon key to delete characters until no content remains, then it returns to the previous menu.
  • In text input, press Up/Down to move the cursor left/right.

8.9 Dual Watch

  • Single Mode: Displays only the main channel (channel name, frequency, number, and working band location).
  • Double Wait: Displays the DW icon. Shows main and sub-frequencies, guarding calls from both. Factory default is Dual Band Dual Watch mode.
  • Single Wait: No DW icon. Displays primary and secondary frequencies, but only receives calls from the primary band. Secondary band is prohibited from receiving calls.

10. Record

The voice record function saves calls as separate records with DMR ID and time details. Standard voice recording is 10 hours in DMR mode only.

10.1 Record Switch

  • Method 1: Press the Menu/Confirm key icon key to enter Main Menu -> Record -> Record Switch to turn on.
  • Method 2: Press the pre-programmed [Record Switch] key to turn on.

Note:

  • When the record function is turned on, the Record icon screen displays.

10.2 Record Selection

The record function can be directed to select Rx record, Tx record, or Rx and Tx record.

  1. Press the Menu/Confirm key icon key to enter main menu -> Record -> Record Sel.
  2. Press the Menu/Confirm key icon key to select the desired type:
    • Rx Record: Only for incoming calls.
    • Tx Record: Record for outgoing calls only.
    • Rx/Tx Record: Record all incoming and outgoing calls.

10.3 Record List

Record list management includes playing, deleting, and viewing details.

  1. Press Menu/Confirm key icon key to enter Main Menu -> Record -> Record List.
  2. Press Up/Down key to retrieve the record entry, then press the Menu/Confirm key icon key to select.
    • Play: Displays Record Playback and plays the current entry. Press Up/Down to switch records.
    • Delete: Delete the current entry.
    • Detail: View details (source ID, inbound/outbound, date, time, record duration).

10.4 Record Delete

  1. Go to Main Menu -> Record -> Record Delete.
  2. Press the Menu/Confirm key icon key and the screen will show “Confirm Delete?”.
  3. Press the Menu/Confirm key icon key to delete all record files.
  4. Press the Menu/Confirm key icon key to cancel deletion and return to the previous menu.

11. Roaming

Roaming allows users to search the roaming channel list by a programmed time interval and lock onto the repeater with the strongest signal.

11.1 One Time Roam

Allows manual roaming. After roaming, it returns to the off state. Manual roaming is a one-time action.

11.2 Roaming Zone

Select a Roaming Zone from the list to set it as active. You can scroll down the list of Zones and select Add Channel to add a new channel to the current Roaming Zone.

  • Select: Select the current roaming zone.
  • Channel List: View channel members of the current roaming zone and allow deletion.
  • Add Channel: Add a channel to the current roaming zone.
  • Edit Name: Reset the roaming zone name.
  • Add Zone: Create a new roaming zone and name it.

11.3 Auto Roaming

Set the fixed time waiting interval to begin automatic roaming when the repeater cannot be found. Roaming will start at the end of this time.

  • Roaming On/Off: Enter (on)/exit (off) roaming.
  • Timed Time: Set a fixed waiting interval to start automatic roaming if a repeater cannot be found.

12. GPS Positioning Function (Optional)

12.1 GNSS On/Off

  • On: Enables GPS positioning. GPS icon icon is displayed.
  • Off: Disables GPS positioning.

12.2 Positioning Information (GNSS Info)

Positioning success will be displayed:

  • Lat: [Latitude]
  • Long: [Longitude]
  • Speed: [Speed] km/h
  • Altitude: [Altitude] M.
  • SA: [SA Value]
  • Time: [Time]
  • Date: [Date]

12.3 Time Zone

Users can convert UTC time to local time through the Time Zone menu. Select the time zone for the terminal to display. Range: UTC -12:00 to UTC +13:00, default UTC +8:00.

12.4 Display Format

  • DDD: Displayed in degrees.
  • DMS: In degrees, minutes, and seconds (XXX. /MMM'/SS").

12.5 Positioning Mode (GNSS Mode)

Supports GPS, BeiDou. Options: GPS, BeiDou, GPS+BeiDou.

13. APRS Location Reporting (Supported by GPS)

13.1 APRS On/Off

  • On: Enables APRS automatic position reporting (digital mode only).
  • Off: Disables APRS function.

13.2 Upload ID

APRS uploads the specified ID.

13.3 Upload Type

  • Private call: APRS is reported to the specified private call ID.
  • Group call: APRS is reported to the specified RX group (group ID).

13.4 Report Channel

Allows user to select a channel to transmit DMR APRS (current channel or specified channel).

13.5 Intervals Set

Sets DMR APRS to be sent automatically at a fixed time.

  • Off: No limitation.
  • 60s-7650s: Upload every 60s-7650s.

13.6 APRS Information

View APRS message information.

13.7 Upload Beacon

  • GPS Beacon: APRS transmits GPS data only if GPS is on and successfully locked on satellites.
  • Fixed Beacon: APRS transmits fixed beacon data without GPS being on.

The fixed beacon location information should be set in CPS first.

14. Other Functions

14.1 NOAA Weather Switch and Weather Alerts

In standby mode, press the [*] key to quickly turn on NOAA channel reception and display the NOAA icon icon. Press Up/Down to select a Weather channel.

Weather channel reception status: press MENU -> Scan -> Scan Switch -> On, enter auto scan.

Scan to active channel, stop automatically, display Weather channel and frequency, turn on speaker to play weather broadcast (radio does not receive radio call).

Press the Menu/Confirm key icon key to enter the weather alert option:

  • Off: Disables the weather alert feature. The warning Warning icon icon disappears and only the NOAA icon icon is displayed.
  • On: Turns on the weather alert function and the Weather alert icon screen displays. Press the Home key icon key to return to the standby screen.

The radio returns to standby and allows radio calls. The walkie-talkie waits for the radio channel and the weather channel, and automatically scans the radio channel and the weather alert channel cyclically.

Activate the Weather Alert feature to receive a 1050 Hz alert signal, you will hear a loud beep and the radio will automatically switch to Weather Broadcast mode.

When the NOAA weather function is on, long press the [*] key or Home key icon key to exit the NOAA weather scan reception function and return to standby mode.

CH.No.CH.Freq.CH.No.CH.Freq.
1162.550006162.50000
2162.400007162.52500
3162.475008161.65000
4162.425009161.77500
5162.4500010163.27500

14.2 Password Service

Set passwords to manage the terminal. You can set frequency reading, frequency writing, and power-on passwords through CPS Software -> Public -> Optional Functions -> Password.

  • Read from radio password: Up to 8 numbers.
  • Write to Radio Password: Up to 8 numbers.
  • Power-on Password: Up to 8 digits.

14.3 Resetting the Radio

  1. Turn off the radio.
  2. Press and hold the [SK1] and [SK2] keys simultaneously to turn on the power.
  3. The radio will show “Are you sure restoring factory settings?”.
    • Press the Menu/Confirm key icon key to exit reset and restart.
    • Press the Menu/Confirm key icon key to continue reset (shows “Initializ radio ......”).

Note:

  • Resetting is only possible if the “Allow Reset” option is checked through CPS programming.

15. Programming

15.1 DMR Repeater Configuration

Example for MR channel mode:

  • Rx frequency: 422.96250 MHz
  • Tx frequency: 412.96250MHz
  • Color Code 1; Time Slot 1; TX Contact 1;

Add Digital Channel

  1. Press and hold Menu/Confirm key icon key to switch to MR channel mode, and press the Menu/Confirm key icon key to enter main menu > Settings > Channel Set.
  2. Press Up/Down key to New chan > Digital.
  3. Name the channel (press # key to switch input method).
  4. Set RX - frequency, enter 42296250 Press Menu/Confirm key icon.
  5. Set TX - frequency, enter 41296250.
  6. Press Menu/Confirm key icon to save.

Add New Channel to Zone

  1. Press the Menu/Confirm key icon key to enter main menu -> Zone -> Select a Zone and confirm.
  2. Press Up/Down key to select “Add Channel”.
  3. Press Menu/Confirm key icon key to select the channel you just added.
  4. Prompt “Add Success” and return to the previous menu.

Configure Parameters for New Channel

  1. Press Menu/Confirm key icon key to enter main menu -> Setting -> Channel Set.
  2. Press Menu/Confirm key icon key to Tx Contacts -> Contacts 1 -> Press Menu/Confirm key icon (to add a TX Contact).
  3. Press Menu/Confirm key icon key to Color Code -> Select 1 -> Press Menu/Confirm key icon (to select a CC).
  4. Press Up/Down key to Time Slot -> Slot 1 -> Press Menu/Confirm key icon (to select a Time Slot).
  5. Press Menu/Confirm key icon key to Rx Group List -> Rx Group -> Press Menu/Confirm key icon (to add an RX group).
  6. Press Home key icon key to exit the menu and return to standby.

It is strongly recommended that the terminal sets the power to high power in relay mode.

15.2 Programming Guide

Baofeng DM-32UV radios ship with the keypad locked per FCC rules. You can press the (Menu) key and the (star) key to unlock the keypad for the first time. You will need a programming cable to connect your radio to your computer for programming.

The programming software and codeplug programming guide are available for download from Baofeng website: http://www.baofengradio.com

When programming this radio for the first time, it is recommended you first READ the radio with the software and then save this file for future reference as it contains the default programming and settings. After reading, make your programming and frequency changes, then send this edited file back to your radio. When using a profile in your hard disk, use the CPS to import and edit it. Then write all data to the radio.

  • During reading data from the radio (frequency reading), the PC program is displayed and the red indicator light flashes.
  • During writing data to the radio (frequency writing), the PC program is displayed and the green indicator light flashes.

15.3 Record Management

Enter the record management software through CPS software -> Tools -> Record. You can connect the radio, read out the record records, view the detailed records of each record (Record ID, TX/RX, Call ID, Call Type, Record time, Record duration, etc.) and play or save as WAV file.

15.4 Firmware Upgrade

Download program software, firmware (codeplug), program guide from baofeng website: http://www.baofengradio.com.

Through CPS software -> Tools -> Firmware Upgrade -> open the file (load .bin file), click upgrade, a dialog box prompts “Please hold down the [PTT+SK1] key to open the radio”. Follow prompts to hold [PTT] and [SK1] keys to open the radio (indicator light is green), click “Upgrade”, then press [PTT] and [SK1] keys to open the radio (indicator light is green). “Upgrade”, the red light flashes until upgrade is completed.

15.5 Internal Parameters

Edit model information, band information, function options (value-added function open).

15.6 Tuning and Testing Items

The radio enters the test mode and the debugging of technical indexes (read first, then modify, then write).

15.7 Download Language and Character Libraries

Download voice files, Chinese character libraries, English character libraries and other arbitrary files.

15.8 Power-on Picture

Update the power-on picture. Format: .bmp. Size: 160*128 (1.77 inch), 240*320 (2.00 inch).

15.9 Amateur DMR-MARC

For the best Amateur DMR experience, obtain a subscriber ID from one of many available Amateur Radio sources. A U.S. Amateur can obtain a DMR ID From: https://www.radioid.net/cgi-bin/trbo-database/register.cgi. For DMR repeaters in your area, see: www.repeaterbook.com. World DMR repeater network map: https://www.repeaterbook.com/index.php/repeater-database. World DMR repeater network with verified Talkgroups by activity: https://brandmeister.network/?page=lh.

15.10 Global Amateur Contact Database (.csv)

The DM-32UV DMR radios contain a separate database memory for importing and displaying Amateur DMR individual IDs, call sign and user name in comma-delimited format (.csv). Reference the programming guide for import and export database operations. User List Contact Database: https://ham-digital.org/status/.

16. Troubleshooting

Your radio is a sophisticated electronic instrument requiring minimal maintenance. However, follow these precautions:

  • If the antenna is damaged, do not transmit except in emergencies. Antenna failure to transmit may cause further radio damage.
  • You are responsible for continuing FCC technical compliance checks.
  • Arrange regular performance checks with your dealer.
PhenomenaSolution
The radio cannot be switched on or no display after being switched on.Battery pack may not be installed properly. Remove and reinstall.
The battery doesn't last very long after charging.Battery power may be insufficient. Recharge or replace. Battery may be defective; replace.
Cannot talk to or hear other members in your group.
  1. Ensure frequency and CTCSS are the same as other members.
  2. Ensure you are within range.
  3. Ensure correct digital mode and frequency.
  4. In digital mode, ensure correct code and encrypt group is used.
  5. In digital mode, ensure correct receiving contacts and receiving group are used.
Other voices from Non group members are heard on the channel.Analog: Change the CTCSS/DCS Tone and ensure it's changed on all radios in your group.
Digital channel cannot Private call, Group call.Check Color Code, Time Slot, Tx Contacts, arranged to Rx Group List is correct.

*If these solutions do not fix your problems, or you have other queries, please contact your dealer for technical support.

17. Technical Specifications

Product dimensions diagram

Figure 6: Product Dimensions

Table 2: General Specifications
ParameterValue
Frequency Range (Receiver)VHF136.0-174.0MHz / UHF400.0-480.0MHz / AM108-136MHz / FM65-108
Frequency Range (Transmit)144-148MHz / 420-450MHz (V04), 144-146MHz / 400-429.995MHz / 450-69.990MHz (V05), 144-146MHz / 430-440MHz (V06), 136-174MHz / 400-438MHz (V07), 136-174MHz / 400-480MHz (V00)
Memory Channel4000 channels
Digital Contacts800 + 200000 (.csv)
Channel Spacing25KHz (Wide Band), 12.5KHz (Narrow Band)
Frequency Stability±2.5ppm
Operating Temperature-10°C ~ +55°C
Operating Voltage7.4V DC ±20% (2100mAh)
Size182×67×41mm (with battery pack)
Weight350g (with battery pack, antenna)
Table 3: Transmitting Part Specifications
ParameterValue
Output powerHigh: 8W, Middle: 4W, Low: 1W
Output ConsumptionAnalog≤2.6A, Digital≤1.5A
Consumption≤0.18A
FM modulation16KΦF3E@25KHz, 14KΦF3E@20KHz, 11KΦF3E@12.5KHz
4FSK digital modulation12.5KHz for data: 7K60FXD, 12.5KHz for data and voice: 7K60FXE
Modulation Distortion≤5%
Signal-to-noise (wide/narrow)≥45dB@25KHz, ≥40dB@12.5KHz
Adjacent Channel power≤-65dB, ≤-60dB
Audio Response+1~3dB
Antenna Port Spurious9KHz-1GHz: ≤-20dBm, 1GHz-12.75GHz: ≤-20dBm
Table 4: Receiving Part Specifications
ParameterValue
Digital ProtocolETSI-TS102 361-1,-2,-3
Vocoder typeAMBE+2™
Analog receive sensitivity-122dBm (12dB SINAD)
Digital receive sensitivity-120dBm (BER≤5%)
Audio power<1W
Audio distortion<10%
Audio response+1~-3dB
Signal imitation≥70dB
Inter-mediation (Wide/ narrow)≥62dB/≥58dB
Adjacent channel selectivity≥65dB/≥60dB
Receive Current≤380mA
PM noise≥45dB@25KHz /≥40dB @12.5KHz

*All specifications may be modified without prior notice or liability.

17.1 CTCSS Frequencies

NumberFrequencyNumberFrequencyNumberFrequencyNumberFrequencyNumberFrequency
167.0269.3371.9474.4577.0
679.7782.5885.4988.51091.5
1194.81297.41310014103.515107.2
16110.917114.818118.819123.020127.3
21131.822136.523141.324146.225151.4
26156.727159.828162.229165.530167.9
31171.332173.833177.334179.935183.5
36186.237189.938192.839196.640199.5
41203.542206.543210.744218.145225.7
46229.147233.648241.849250.350254.1

17.2 DCS Codes

NumberCodeNumberCodeNumberCodeNumberCodeNumberCode
1D023N2D025N3D026N4D031N5D032N
6D036N7D043N8D047N9D051N10D053N
11D054N12D065N13D071N14D072N15D073N
16D074N17D114N18D115N19D116N20D122N
21D125N22D131N23D132N24D134N25D143N
26D145N27D152N28D155N29D156N30D162N
31D165N32D172N33D174N34D205N35D212N
36D223N37D225N38D226N39D243N40D244N
41D245N42D246N43D251N44D252N45D255N
46D261N47D263N48D265N49D266N50D271N
51D274N52D306N53D311N54D315N55D325N
56D331N57D332N58D343N59D346N60D351N
61D356N62D364N63D365N64D371N65D411N
66D412N67D413N68D423N69D431N70D432N
71D445N72D446N73D452N74D454N75D455N
76D462N77D464N78D465N79D466N80D503N
81D506N82D516N83D523N84D526N85D532N
86D546N87D565N88D606N89D612N90D624N
91D627N92D631N93D632N94D645N95D654N
96D662N97D664N98D703N99D712N100D723N
101D731N102D732N103D734N104D743N105D754N
106D023I107D025I108D026I109D031I110D032I
111D036I112D043I113D047I114D051I115D053I
116D054I117D065I118D071I119D072I120D073I
121D074I122D114I123D115I124D116I125D122I
126D125I127D131I128D132I129D134I130D143I
131D145I132D152I133D155I134D156I135D162I
136D165I137D172I138D174I139D205I140D212I
141D223I142D225I143D226I144D243I145D244I
146D245I147D246I148D251I149D252I150D255I
151D261I152D263I153D265I154D266I155D271I
156D274I157D306I158D311I159D315I160D325I
161D331I162D332I163D343I164D346I165D351I
166D356I167D364I168D365I169D371I170D411I
171D412I172D413I173D423I174D431I175D432I
176D445I177D446I178D452I179D454I180D455I
181D462I182D464I183D465I184D466I185D503I
186D506I187D516I188D523I189D526I190D532I
191D546I192D565I193D606I194D612I195D624I
196D627I197D631I198D632I199D645I200D654I
201D662I202D664I203D703I204D712I205D723I
206D731I207D732I208D734I209D743I210D754I

18. User Tips

  • Programming Best Practice: When programming the radio, always start by reading the factory software data. Then, rewrite this data with your desired frequencies and settings to a new saved code plug. This helps prevent errors.
  • Licensing: Ensure your programming complies with your local FCC, CE, UKCA, IC (or other country) license certification. Operating this unit in transmit mode requires a valid Amateur Radio License in many regions.
  • Charging for Optimal Performance: It is recommended to power off your radio while charging. If the radio is on during charging, it may not indicate a full charge correctly, and you might not be able to transmit if the battery is completely empty. Allow the battery to charge to at least one bar before attempting to transmit.
  • Battery Longevity: For optimal battery life, remove the radio from the charger within 6 hours of full charge. Avoid storing the radio while it is continuously connected to the charger.

19. Warranty & Support

19.1 On-Line Service and Support

The Baofeng website provides additional information about obtaining service or support for Baofeng two-way radios and accessories. Visit: www.baofengradio.com.

19.2 FCC Licensing Information

This Baofeng radio operates on Commercial / Land Mobile frequencies which require a license from your local radio authority or the Federal Communications Commission (FCC) for business, personal, education, and recreational use. To obtain forms, call the FCC forms hotline at: 1-800-418-3676 or visit http://www.fcc.gov. For questions concerning commercial licensing, contact the FCC at 1-888-CALL-FCC (1-888-225-5322).

19.3 User Manual (PDF)

A detailed user manual in PDF format is available for download. You can view it here: User Manual (PDF).

20. Disclaimer

Every effort has been made to ensure the information in this document is complete, accurate, and up-to-date. Baofeng Radio assumes no responsibility for errors or omissions. Due to continuous technological development, the design and specifications of the product may change without notice. No part of this handbook may be copied, modified, translated, or disseminated without prior written authorization. Changes or modifications made to this device by non-authorized users could void the authority to operate this equipment. All operators using Private Land Mobile frequencies must obtain a radio license before operating their equipment.

PO FUNG ELECTRONIC (HK) INTERNATIONAL GROUP COMPANY LIMITED

Address: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong

E-mail: wangjianhui@baofengradio.com

Website: http://www.baofengradio.com

Made in China

Print version: DM32UV_EN_V1.0


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.