1. Introduction
Thank you for choosing the ZGCINE PS-LPE6 Dual USB-C Charger Case Box. This product is designed to efficiently charge two Canon LPE6 series batteries (LPE6/E6N/E6NH/E6P) simultaneously, while also providing convenient storage for memory cards. Featuring PD fast charging support and an OLED display for real-time monitoring, this charger case ensures your camera batteries are always ready for action. Please read this manual carefully before use to ensure proper operation and longevity of your device.
Image: ZGCINE PS-LPE6 Charger Case with two LPE6 batteries.
2. Product Overview
2.1 Key Features
- Dual USB-C PD Fast Charging Input (5V/3A; 9V/3A)
- Dual Battery Charging Output (8.4V/0.6A*2)
- Dedicated slots for 2 SD cards and 2 TF cards
- Additional slot for 1 CFexpress Type-A card
- 0.96-inch OLED screen for real-time battery voltage monitoring
- Magnetic opening and closing cover for secure storage
- Contact copper gold-plated pins for higher conductivity and resistance
- Comprehensive safety protections: Overvoltage, Short Circuit, Overpower, Overdischarge, Overcurrent, Overcharge, Temperature, and Recovery Protection.
- Fully compatible with original and non-original Canon LPE6/E6N/E6NH/E6P batteries.
2.2 Components and Controls
Familiarize yourself with the various parts of your ZGCINE PS-LPE6 charger case:
Image: Labeled diagram of the charger's components, including USB-C PD input, various card slots, battery slots, display screen, and power button.
- USB-C PD Input: For connecting the charging cable and power source.
- Battery Slots (x2): For inserting Canon LPE6 series batteries.
- SD Card Slots (x2): For storing SD memory cards.
- TF Card Slots (x2): For storing TF (MicroSD) memory cards.
- CFexpress Type-A Card Slot (x1): For storing CFexpress Type-A memory cards.
- Display Screen: 0.96-inch OLED screen showing battery voltage and charging status.
- Power Button: To turn the device on/off or cycle through display modes.
2.3 Safety Features
The ZGCINE PS-LPE6 is equipped with multiple safety mechanisms to protect your batteries and the charger:
Image: Diagram illustrating overvoltage, short circuit, overpower, overdischarge, overcurrent, overcharge, temperature, and recovery protection.
- Overvoltage Protection: Prevents damage from excessive voltage.
- Short Circuit Protection: Safeguards against short circuits.
- Overpower Protection: Protects from drawing too much power.
- Overdischarge Protection: Prevents batteries from being discharged too low.
- Overcurrent Protection: Protects against excessive current flow.
- Overcharge Protection: Stops charging once batteries are full.
- Temperature Protection: Monitors and regulates internal temperature.
- Recovery Protection: Ensures safe recovery from protection states.
3. Specifications
| Parameter | Value |
|---|---|
| USB-C PD Input | 5V/3A; 9V/3A |
| USB-C PD Output | 8.4V/0.6A*2 |
| Net Weight | 135g |
| Size (L*W*H) | 66mm * 62mm * 84mm |
| Display | 0.96-inch OLED screen |
| Battery Compatibility | Canon LPE6/E6N/E6NH/E6P |
| Memory Card Slots | 2x SD, 2x TF, 1x CFexpress Type-A |
4. Setup
- Unpack the Charger: Carefully remove the ZGCINE PS-LPE6 charger case and the USB-C cable from its packaging.
- Connect to Power: Connect one end of the provided USB-C cable to the USB-C PD input port on the charger case. Connect the other end to a compatible USB-C power adapter (not included) that supports PD fast charging (5V/3A or 9V/3A recommended).
- Insert Batteries: Open the magnetic cover of the charger case. Insert up to two Canon LPE6 series batteries into the designated battery slots, ensuring correct polarity. The gold-plated pins ensure optimal contact.
Image: Magnetic opening and closing cover for battery slots.
Image: Close-up of gold-plated pins for efficient charging.
- Insert Memory Cards (Optional): If desired, insert your SD, TF, or CFexpress Type-A memory cards into their respective slots for secure storage.
Image: USB-C PD fast charging input port.
5. Operating Instructions
- Power On: Press the power button located on the front of the charger case. The OLED screen will illuminate.
- Monitor Charging Status: Once batteries are inserted and the charger is connected to power, the OLED screen will display the real-time voltage (e.g., U:8.40V) and charging status for each battery. A battery icon will typically show animation during charging and become solid when fully charged.
Image: OLED screen displaying battery voltage and charging indicators.
- PD Fast Charging: The charger supports Power Delivery (PD) fast charging. Ensure your power adapter also supports PD for optimal charging speeds.
- Power Off: Press and hold the power button to turn off the charger.
5.1 Product Demonstration Video
Video: A short demonstration of the ZGCINE PS-LPE6 charger case features and operation.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the charger case. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the charger case in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Moisture: Keep the charger away from water and high humidity to prevent damage to electronic components.
- Handle with Care: Avoid dropping or subjecting the charger to strong impacts.
7. Troubleshooting
- Charger not powering on:
- Ensure the USB-C cable is securely connected to both the charger and the power adapter.
- Verify that the power adapter is functioning correctly and plugged into a live outlet.
- Try a different USB-C cable or power adapter.
- Batteries not charging:
- Check that batteries are inserted correctly with proper polarity.
- Ensure the battery contacts are clean and free of debris.
- Verify that the charger is powered on and the OLED screen is active.
- If using non-original batteries, ensure they are fully compatible with the LPE6 standard.
- OLED screen not displaying information:
- Press the power button briefly to ensure the screen is not in standby mode.
- If the charger is powered on but the screen remains blank, try disconnecting and reconnecting the power source.
- Slow charging speed:
- Ensure your USB-C power adapter supports Power Delivery (PD) and provides sufficient output (5V/3A or 9V/3A).
- Using a lower-power adapter will result in slower charging.
8. User Tips
No specific user tips were found in the provided reviews or Q&A data. However, general best practices for battery chargers include:
- Always use a high-quality USB-C PD power adapter for optimal charging performance.
- Periodically check the battery and charger contacts for cleanliness to ensure efficient power transfer.
- When traveling, utilize the integrated memory card slots to keep your essential data organized and protected alongside your batteries.
9. Warranty & Support
For warranty information, technical support, or service inquiries, please contact the ZGCINE Official Store or your authorized dealer. Keep your purchase receipt as proof of purchase.
