Midea KJR-120M(X6W)/BGEF

Contents

Midea Central Air Conditioning Line Controller

Model: KJR-120M(X6W)/BGEF

User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Midea KJR-120M(X6W)/BGEF Central Air Conditioning Line Controller. This device is designed to provide manual control over your Midea central air conditioning system, ensuring comfortable indoor climate management.

Front and back view of the Midea KJR-120M(X6W)/BGEF central air conditioning line controller
Figure 1: Front and back view of the KJR-120M(X6W)/BGEF controller. The front features the display and control buttons, while the back shows mounting points and electrical connections.

2. Setup and Installation

The Midea KJR-120M(X6W)/BGEF controller is designed for wall-mounted installation and requires electrical connection to your central air conditioning system. Due to the nature of electrical wiring and HVAC systems, professional installation by a qualified technician is highly recommended to ensure proper function and safety.

2.1 Pre-Installation Checklist

  • Ensure the main power supply to the air conditioning unit is turned OFF before beginning installation.
  • Verify that the controller model KJR-120M(X6W)/BGEF is compatible with your Midea central air conditioning system.
  • Gather necessary tools: screwdriver set, wire strippers, mounting screws, drill (if needed).

2.2 Mounting the Controller

  1. Carefully remove the back plate from the controller unit.
  2. Position the back plate on the desired wall location, ensuring it is level and at an accessible height.
  3. Mark the drilling points through the screw holes on the back plate.
  4. Drill pilot holes if necessary and secure the back plate to the wall using appropriate screws.

2.3 Electrical Connection

Refer to your central air conditioning system's wiring diagram for specific connection points. The back of the KJR-120M(X6W)/BGEF controller features terminals for connecting to the AC unit's control wiring. Ensure all connections are secure and correctly matched according to the system's specifications.

  • Connect the control wires from the central air conditioning unit to the corresponding terminals on the controller's back plate.
  • Double-check all wiring for correct polarity and secure connections.
  • Once wiring is complete, carefully attach the front panel of the controller to the secured back plate.

2.4 Initial Power-Up

After installation, restore power to the central air conditioning system. The controller display should illuminate, indicating successful power-up. Follow any on-screen prompts for initial setup or calibration if present.

3. Operating Instructions

The KJR-120M(X6W)/BGEF controller provides intuitive manual control over your Midea central air conditioning system. Familiarize yourself with the buttons and their functions:

Button IconFunctionDescription
Power (circle with vertical line)Power ON/OFFTurns the air conditioning system ON or OFF.
Mode (fan icon)Mode SelectionCycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
Fan Speed (three blades)Fan Speed AdjustmentAdjusts the fan speed (e.g., Low, Medium, High, Auto).
Up/Down ArrowsTemperature/Setting AdjustmentIncreases or decreases the set temperature or navigates menu options.
Timer (clock)Timer FunctionSets or cancels timed operations for ON/OFF.
Plus/MinusValue AdjustmentUsed for fine-tuning settings or values in specific modes.
Lock (key)Keypad LockLocks or unlocks the control panel to prevent accidental changes.
Reset (recycle arrows)Reset FunctionResets certain settings or clears error codes.
Return (U-turn arrow)Back/ExitReturns to the previous menu or exits a setting.
Menu (grid icon)Menu AccessAccesses advanced settings or system information.

3.1 Setting the Temperature

Use the Up and Down arrow buttons to adjust your desired room temperature. The set temperature will be displayed on the screen.

3.2 Changing Operating Mode

Press the Mode button repeatedly to cycle through the available operating modes until your desired mode is selected.

3.3 Adjusting Fan Speed

Press the Fan Speed button repeatedly to select your preferred fan speed.

4. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your controller.

4.1 Cleaning the Controller

  • Wipe the surface of the controller with a soft, dry, or slightly damp cloth.
  • Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the display or casing.
  • Ensure no liquid enters the controller's internal components.

4.2 System Maintenance

For maintenance of the central air conditioning system itself, refer to the specific user manual provided with your Midea AC unit. Regular professional servicing of your AC system is recommended.

5. Troubleshooting

If you encounter issues with your Midea KJR-120M(X6W)/BGEF controller, try the following steps before contacting support:

ProblemPossible CauseSolution
Controller display is blank.No power supply; loose wiring.Check if the main power to the AC unit is ON. Verify all electrical connections are secure. If issues persist, consult a professional.
Buttons are unresponsive.Keypad lock is active; temporary software glitch.Press the Lock (key) button to unlock the keypad. If still unresponsive, try pressing the Reset button or temporarily cut power to the AC unit and restore it.
Incorrect temperature reading.Sensor obstruction; calibration issue.Ensure the controller's sensor area is not blocked. If the issue persists, a professional may need to recalibrate the system.
AC unit not responding to controller commands.Communication error; AC unit fault.Verify the controller is correctly wired to the AC unit. Check the AC unit for any error codes or operational issues. Consult a professional HVAC technician.

6. Specifications

FeatureDetail
Model NumberKJR-120M(X6W)/BGEF
TypeAir Conditioning Fitting / Air Conditioner Parts
ApplicationHome
CertificationCE
OriginMainland China
Package Length23 cm
Package Width15 cm
Package Height20 cm
Package Weight1.0 kg

7. User Tips

  • No Wi-Fi Functionality: Please note that this KJR-120M(X6W)/BGEF model is a manual control panel and does not include Wi-Fi connectivity for remote control via smartphone apps.
  • Professional Installation: For optimal performance and safety, especially with electrical connections, consider professional installation.

8. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your Midea central air conditioning system or contact your authorized Midea service provider. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.