LEAP PQ9903A

Contents

LEAP PQ9903A Multifunctional Digital Chess Clock

User Manual

1. Introduction

The LEAP PQ9903A is a versatile digital chess clock designed for a variety of two-person board games. It features count-up and count-down timers, an alarm function, and 29 pre-programmed options to suit different game types and time controls. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your device.

LEAP PQ9903A Digital Chess Clock
Figure 1: LEAP PQ9903A Digital Chess Clock
Product Application Examples
Figure 2: The clock is suitable for games such as Chinese Chess, International Chess, and I-Go.

2. Setup

2.1 Battery Installation

  1. Locate the battery compartment on the underside of the chess clock.
  2. Open the battery compartment cover.
  3. Insert two (2) AA batteries (not included), ensuring correct polarity (+/-).
  4. Close the battery compartment cover securely.

2.2 Power On/Off

To power on the device, slide the 'ON/OFF' switch, located on the underside of the clock, to the 'ON' position. To power off, slide the switch to the 'OFF' position.

Back view of the chess clock showing battery compartment and ON/OFF switch
Figure 3: Underside of the clock with battery compartment and ON/OFF switch.

3. Operating Instructions

3.1 Controls and Display

Front view of the chess clock with numbered labels for display segments and buttons
Figure 4: Front view with labeled display and buttons.

The clock features the following controls and display elements:

  • Buttons:
    • +: Increase or decrease value under set mode.
    • -: Clear or display moves of play under other modes.
    • ▶II/G: Start/stop/set.
    • OK/ALARM: Confirm selection or activate/deactivate alarm.
  • Display Elements:
    • 1 & 2: Restricted Time/Moves (for Player 1 and Player 2).
    • 3 & 7: Hour display (for Player 1 and Player 2).
    • 4 & 8: Minutes display (for Player 1 and Player 2).
    • 5 & 9: Seconds display (for Player 1 and Player 2).
    • 6: Pre-programmed Option or Number of Moves display.

3.2 Setting Time Controls (Pre-programmed Options)

The LEAP PQ9903A offers 29 pre-programmed time control options. To select and activate an option:

  1. Ensure the clock is powered on.
  2. Use the ▶II/G button to enter the setting mode.
  3. Use the + or - buttons to cycle through the 29 pre-programmed options (displayed in area 6).
  4. Once the desired option is displayed, press OK/ALARM to confirm.
  5. Press ▶II/G to start the game timer.

All pre-programmed options allow for manual adjustment of parameters. Refer to the detailed list of options below:

Table 1: Pre-programmed Clock Type Options
Option No. Clock Type
015 minutes countdown
0225 minutes countdown
03Bonus 3 minutes, add 3 seconds/move
04Bonus 25 minutes, add 10 seconds/move
05Bonus 90 minutes, add 30 seconds/move
06Bonus 90 minutes, add 10 seconds/move
07Bonus 3 minutes, add 2 seconds/move
08Bonus 3 minutes, add 5 seconds/move
09Delay 5 minutes, 3 seconds/move
10Delay 2 minutes, 10 seconds/move
11Delay 15 minutes, 10 seconds/move
121 minute hourglass
1310 seconds arbitration
1430 minutes arbitration
151 hour restrict
162 hour restrict
172 hours 30 minutes countdown
182 hours + 1 hour repeat
192 hours + 1 hour + 30 minutes countdown
202 hours + 1 hour + 5 minutes, add 10 seconds/move
212 hours + 15 minutes, add 30 seconds/move
222 hours + 1 hour + 15 minutes, add 30/move
2390 minutes + 30 minutes, add 30 seconds/move
24100 minutes + 30 minutes, add 30 seconds/move
2540 moves/100 minutes + 20 minutes, add 10/move
2610 moves/25 minutes + 30 seconds
271 hour + 20 seconds
282 hours + 30 seconds
2930 seconds/move
NoteAn additional option for '60 seconds byo-yomi for 10 times' may be available.

3.3 Adjusting Time During a Game

The clock allows for time correction during a game. Use the + or - buttons to adjust the time for the active player if needed. Consult your game's rules for appropriate use of this feature.

3.4 Alarm Function

An alarm can be set to warn players when time is running out. Specific instructions for setting the alarm will depend on the selected pre-programmed option. Generally, the OK/ALARM button is used in conjunction with other buttons to configure or acknowledge the alarm.

4. Maintenance

4.1 Cleaning

To clean the chess clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the ABS shell or electronic components. Keep the device away from excessive dust and moisture.

4.2 Battery Replacement

When the display becomes dim or the clock functions erratically, it is time to replace the batteries. Follow the battery installation steps in Section 2.1. Always replace both AA batteries at the same time with new ones.

5. Troubleshooting

  • Clock does not power on:
    • Ensure the ON/OFF switch is in the 'ON' position.
    • Check if the batteries are inserted correctly with the right polarity.
    • Replace old batteries with new AA batteries.
  • Display is dim or flickering:
    • This usually indicates low battery power. Replace the batteries.
  • Buttons are unresponsive:
    • Ensure the clock is not in a locked state (if applicable to the current mode).
    • Try powering the device off and on again.
  • Incorrect time display:
    • Verify that the correct pre-programmed option has been selected.
    • Reset the clock by removing and reinserting the batteries.

6. Specifications

Feature Detail
ModelLEAP PQ9903A
TypeDigital Chess Clock
FunctionsCount Up/Down, Alarm, Game Timer
Pre-programmed Options29
MaterialABS Shell, Electronic Components
Power Source2 x AA Batteries (not included)
ColorWine Red
Dimensions (L x W x H)7.74 in x 4.41 in x 2.2 in (approx. 19.66 cm x 11.2 cm x 5.59 cm)
OriginMainland China
Side view of the chess clock with dimensions
Figure 5: Approximate dimensions of the LEAP PQ9903A chess clock.

7. User Tips

  • Explore Pre-programmed Options: Take time to familiarize yourself with the 29 built-in time control options. This can save time during setup for common game formats.
  • Customization: Remember that all pre-programmed options allow for manual adjustment of parameters. This flexibility is useful for unique game scenarios or personal preferences.
  • In-Game Time Correction: Utilize the in-game time correction feature responsibly, as per the rules of your specific game, to handle unexpected situations or agreed-upon adjustments.
  • Alarm Awareness: Pay attention to the alarm function, especially in timed games, to avoid running out of time unexpectedly.

8. Warranty and Support

For specific warranty information, please refer to the terms provided at the time of purchase or contact your retailer. For technical support or inquiries, you may contact the seller directly:

  • Email: 3466827996@qq.com
  • WhatsApp: +86 13434247402
  • Phone/WeChat: 13434247402

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.