EYAOO RM-014S+ Universal TV Remote Control

Introduction

The EYAOO RM-014S+ is a universal infrared (IR) remote control designed for multi-brand televisions. It offers accurate and sensitive control with smooth keystrokes, utilizing a smart chip for stable performance. This remote is ready for use with most TVs and requires minimal setup.

Setup and Installation

Battery Installation

The RM-014S+ remote control requires two AAA batteries (not included). To install:

1. Open the battery compartment cover located on the back of the remote control.
2. Insert two AAA batteries, ensuring correct polarity (+ and -).
3. Close the battery compartment cover securely.

Pairing with Your TV

The remote is designed for direct use with many TVs. If it does not work immediately, you may need to set it up using one of the following methods:

1. Set Up with Code (Recommended for known brands)

If you know your TV brand, find the corresponding code in the code table (usually provided with the remote or available online).

1. Press and hold the 'SET' button and the 'POWER' button simultaneously until the indicator light on the remote turns on.
2. Input the three-digit code for your TV brand.
3. The indicator light will turn off, indicating that the setting is complete.

2. One-Click Search (For unknown codes)

If your TV remote picture is not in the code manual:

1. Manually turn on your TV.
2. Press and hold the 'SET' button and the 'POWER' button simultaneously until the indicator light on the remote turns on.
3. Point the remote at the TV. When the TV displays the volume symbol, immediately release the 'SET' button.
4. Check if other functions are working normally. If not, repeat the above steps.

3. One-to-One Search (Alternative for unknown codes)

1. Press and hold the 'SET' button and the 'POWER' button simultaneously until the indicator light on the remote turns on.
2. Press the 'VOL+' button or 'CH+' button repeatedly. The indicator light will flash each time.
3. When your TV changes channels or displays the volume symbol, release the 'VOL+' or 'CH+' button immediately.
4. Check if other functions are working normally. If not, repeat the above steps.

4. Automatic Search

1. Press and hold the 'SET' button and the 'POWER' button simultaneously until the indicator light on the remote turns on.
2. Press the 'VOL+' button. The indicator light will flash continuously.
3. When the TV displays the volume symbol, release the 'VOL+' button.
4. Check if other functions are working normally. If not, repeat the above steps.

Locking the System

After successful setup, it is recommended to lock the system to prevent accidental reprogramming. Press and hold 'SET' and 'OK' simultaneously until the indicator light flashes to confirm.

Operating Instructions

The RM-014S+ remote control features a standard layout for easy navigation and control of your television. Below is a diagram of the buttons and their primary functions:

• POWER: Turns the TV on or off.
• SOURCE: Selects input sources (HDMI, AV, etc.).
• Number Buttons (0-9): Direct channel selection.
• CH.LIST: Displays the channel list.
• P.MODE / S.MODE: Picture Mode / Sound Mode (functions may vary by TV).
• GUIDE: Accesses the electronic program guide.
• MENU: Opens the TV's main menu.
• HOME: Returns to the TV's smart home screen.
• Navigation (Up/Down/Left/Right) & OK: Navigates menus and confirms selections.
• RETURN / EXIT: Goes back to the previous screen or exits a menu.
• MUTE: Mutes or unmutes the TV sound.
• VOL +/-: Adjusts the volume level.
• CH +/-: Changes channels up or down.
• FAV: Accesses favorite channels.
• INFO: Displays program information.
• AUDIO: Selects audio tracks or modes.
• SLEEP: Sets the sleep timer.
• Media Control Buttons (Rewind, Play/Pause, Fast Forward, Stop, Previous, Next): Controls media playback.
• Colored Buttons (Red, Green, Yellow, Blue): Functions vary by TV and application.
• NETFLIX / YouTube / Prime Video: Dedicated shortcut buttons for these streaming services.

Maintenance

Cleaning

To maintain the remote control's appearance and functionality:

• Wipe the remote with a soft, dry cloth.
• For stubborn dirt, lightly dampen the cloth with water or a mild, non-abrasive cleaner.
• Do not use harsh chemicals, solvents, or abrasive cleaning pads.

Battery Replacement

Replace the AAA batteries when the remote's response becomes sluggish or it stops functioning. Always replace both batteries at the same time with new ones. Dispose of old batteries according to local regulations.

Troubleshooting

• Remote not responding: Check battery polarity, replace batteries if necessary. Ensure there are no obstructions between the remote and the TV's IR receiver.
• TV not responding to remote: Ensure the remote is correctly programmed for your TV model. Try repeating the setup steps (Set Up with Code, One-Click Search, One-to-One Search, or Automatic Search).
• Specific buttons not working: If only some buttons are unresponsive after setup, try reprogramming the remote using a different search method.
• Remote works intermittently: This could indicate low battery power or interference. Replace batteries and ensure a clear line of sight to the TV.

Specifications

Warranty and Support

This product is covered by a 90-day free return policy. In case of product quality issues, you may be eligible for a return or exchange. For further assistance or inquiries, please contact the seller directly.

User Tips

• Compatibility with various brands: While the remote is universal, some less common TV brands (e.g., Pioneer) might require trying all available setup methods (code entry, one-click search, one-to-one search, automatic search) to find the correct programming.
• Direct Use: Many users find the remote works directly out of the box without any setup. Always test basic functions like power and volume first.
• No Voice Function: Please note that this remote control does not support voice commands.