UGREEN PB506

Contents

UGREEN PB506 5000mAh Power Bank Instruction Manual

Model: PB506

1. Introduction

Thank you for choosing the UGREEN PB506 5000mAh Power Bank. This compact and versatile portable charger is designed to provide fast and reliable power for your mobile devices on the go. Featuring a built-in Type-C cable, an integrated stand, and a digital display, it offers convenience and efficiency for various charging needs.

UGREEN PB506 Power Bank charging an iPhone

The UGREEN PB506 Power Bank in use, charging a smartphone.

The PB506 is equipped with a 5000mAh Lithium Ion battery, supporting 20W/22.5W two-way fast charging and multiple fast charging protocols including PD, QC, SCP, FCP, and AFC. Its compact, lipstick-sized design makes it easy to carry, and the digital display allows you to monitor the real-time battery status.

2. Setup and Initial Use

2.1 Charging the Power Bank

Before first use, it is recommended to fully charge your UGREEN PB506 Power Bank. The power bank can be charged using two methods:

  1. Using the Built-in Type-C Cable: Extend the integrated Type-C cable and plug it into a compatible USB power adapter.
  2. Using an External Type-C Cable: Connect an external Type-C cable to the power bank's Type-C input interface and a compatible USB power adapter.

A full charge takes approximately 2.5 hours. The digital display will show the charging progress and indicate '100' when fully charged.

Diagram showing two methods to charge the power bank

The power bank can be charged via its built-in Type-C cable or an external Type-C cable.

2.2 Using the Built-in Type-C Cable

The PB506 features a convenient built-in Type-C cable for direct charging of compatible devices. Simply pull out the cable and connect it to your device's Type-C port.

User demonstrating the built-in Type-C cable for charging

The built-in Type-C cable provides easy and direct charging.

2.3 Utilizing the Integrated Stand

The power bank includes a foldable stand. To use it, simply extend the stand from the body of the power bank and place your phone on it for convenient viewing while charging.

Power bank with built-in stand supporting a phone

The integrated stand allows for hands-free viewing while charging.

3. Operating Instructions

3.1 Charging Your Devices

Connect your device to the power bank using either the built-in Type-C cable or an external Type-C cable plugged into the Type-C interface. The power bank will automatically begin charging your device. The digital display will show the remaining battery percentage of the power bank.

Close-up of the digital display showing battery percentage

The digital display shows the power bank's remaining battery percentage.

3.2 Fast Charging

The UGREEN PB506 supports 20W/22.5W super fast charging for compatible devices. It is compatible with various fast charging protocols including Power Delivery (PD), Quick Charge (QC), SuperCharge Protocol (SCP), Fast Charge Protocol (FCP), and Adaptive Fast Charging (AFC).

Power bank with a phone, highlighting compatibility with multiple fast charging protocols

The power bank supports multiple fast charging protocols for broad compatibility.

3.3 Charging Multiple Devices

The power bank can charge two devices simultaneously using its built-in Type-C cable and the additional Type-C interface. Note that the fast charging function will be turned off when charging two devices at the same time.

Image showing two devices being charged simultaneously

The power bank can charge two devices simultaneously, though fast charging is disabled in this mode.

3.4 Small Current Mode

For charging low-power devices such as smart bracelets, Bluetooth headsets, or small fans, you can activate the small current mode. Long press the power button for 3 seconds to enter this mode. The power bank will automatically exit this mode after approximately 3.5 hours, or you can long press the power button for 3 seconds again to exit manually.

Image showing various mobile phones and small current devices compatible with the power bank

The power bank is compatible with various mobile phones and small current devices.

4. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the power bank. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Avoid dropping the power bank or subjecting it to strong impacts.
  • Water Exposure: Keep the power bank away from water and other liquids.
  • Charging Cycles: For optimal battery life, fully charge and discharge the power bank at least once every three months if not in regular use.

5. Troubleshooting

  • Power bank not charging: Ensure the charging cable is securely connected to both the power bank and the power adapter. Try a different cable or adapter.
  • Device not charging from power bank: Check if the power bank has sufficient charge. Ensure the cable connecting your device to the power bank is working correctly and securely connected.
  • Slow charging: Ensure your device and cable support fast charging. Remember that fast charging is automatically turned off when charging two devices simultaneously.
  • Digital display not working: If the display is blank, the power bank might be fully discharged. Charge the power bank and check again.
  • Power bank overheating: It is normal for the power bank to get slightly warm during charging or discharging. If it becomes excessively hot, disconnect it immediately and contact support. The power bank features ThermalGuard™ technology for temperature monitoring and protection.

6. Specifications

FeatureSpecification
ModelPB506
Battery TypeLithium Ion Battery
Cell Capacity5000mAh 3.6V (18Wh)
Rated Capacity2500mAh (TYP 5V 2.4A)
Max Output20W / 22.5W
Input InterfaceUSB Type C
Output InterfaceUSB-Type C
USB-C1/C2 Input5V-3A, 9V-2.22A, 12V-1.67A
USB-C1/C2 Output10V-2.25A, 5V-3A, 9V-2.22A, 12V-1.67A
Total Output5V-3A Max
Shell MaterialMetal, PC+ABS
Dimensions82mm x 40mm x 27mm
WeightApproximately 118g
Certificationpse, RoHS, FCC, CE
Safety ProtectionsOvercharge, Temperature, Overcurrent, Over power, Short circuit, Overvoltage, Over-release, Undervoltage, Low voltage protection
Table of product parameters for UGREEN PB506

Detailed product parameters for the UGREEN PB506 Power Bank.

Dimensions diagram of the UGREEN PB506 power bank

Physical dimensions of the UGREEN PB506 Power Bank.

Certifications displayed for the UGREEN PB506

Safety certifications for the UGREEN PB506 Power Bank.

Icons representing 9 types of protection for the power bank

The UGREEN PB506 incorporates 9 types of protection for safe operation.

7. User Tips

  • Optimizing Charging Speed: For the fastest charging experience, ensure only one device is connected to the power bank at a time.
  • Charging Small Devices: Remember to activate the small current mode (long press power button for 3 seconds) when charging low-power devices like smartwatches or Bluetooth earbuds to prevent overcharging or damage.
  • Battery Life Expectancy: The 5000mAh capacity is designed to provide a significant boost to your phone's battery. For example, it can charge an iPhone 15 Pro approximately once, offering up to 23 hours of video playback.
  • Travel Friendly: The compact size and safety certifications (like UN38.3) make this power bank suitable for air travel.

8. Warranty and Support

8.1 Warranty Information

The UGREEN PB506 Power Bank comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use. Please retain your proof of purchase for warranty claims.

8.2 Customer Support

For any questions, technical assistance, or warranty claims, please contact the seller or UGREEN customer support directly. Refer to the product packaging or the seller's store page for contact details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.