LEFOO LF52A

Contents

LEFOO LF52A Differential Pressure Switch Instruction Manual

Model: LF52A

Brand: LEFOO

1. Introduction

The LEFOO LF52A is a compact, adjustable double-line differential pressure switch designed for precise monitoring and control in various industrial applications. It is particularly suited for water chillers, filters, pumps, heat exchangers, and coil systems, where it can indicate the status of pumps or water filters by detecting pressure differences. Its robust design ensures reliable performance in demanding environments.

LEFOO LF52A Differential Pressure Switch product view

Figure 1: LEFOO LF52A Differential Pressure Switch

2. Product Features

  • Compact Design: Small size suitable for installation in narrow spaces.
  • Durable Construction: Features a stainless steel panel and reinforced nylon casing, offering impact resistance, low temperature resistance, and excellent electrical insulation.
  • High-Strength Diaphragm: Equipped with a high-strength flexible differential pressure sensing diaphragm for reliable and accurate measurements.
  • Performance: Provides high precision, low error, resistance to acid and alkali, strong anti-interference capabilities, and high overload resistance.
  • Protection: Rated with IP54 protection level.
LEFOO brand focus on pressure control industry, highlighting high-strength flexible differential pressure sensing diaphragm and nylon casing with strong anti-interference and customization support.

Figure 2: Key Features of the LF52A Differential Pressure Switch

3. Specifications

The following table details the technical specifications for the LEFOO LF52A differential pressure switch:

Table 1: LEFOO LF52A Product Parameters
ParameterValue
MediumWater, air, oil (non-corrosive media)
Contact MethodSingle SPDT (micro-motion)
Electrical Specifications3A 250VAC, 5A 125VAC
Storage Temperature-29℃ to 82℃
Operating Ambient Temperature-20℃ to 71℃
Operating Medium Temperature-20℃ to 93℃ (liquid)
Max Allowable Static Pressure16 bar
Max Allowable Differential Pressure10 bar
Setting Repeatability Deviation±1%
Protection LevelIP54
Additional OptionsConverted capillary tube

Adjustable Pressure Ranges (LF52A Series):

ModelAdjustable Range (kPa)Differential Pressure (kPa)Deadband (kPa)
52A-155 ~ 151 ~ 32.2
52A-305 ~ 301 ~ 33.5
52A-706 ~ 703 ~ 55.5
52A-10010 ~ 1003 ~ 510
52A-20010 ~ 2006 ~ 925
52A-30020 ~ 3006 ~ 1238
52A-40030 ~ 4006 ~ 1238

Figure 3: Product Parameters and Selection Table (Partial view from image)

4. Installation

Proper installation is crucial for the accurate and safe operation of the differential pressure switch. Refer to the diagrams below for dimensions and wiring instructions.

4.1 Dimensions

Dimensional drawing of the LEFOO LF52A differential pressure switch showing measurements in millimeters.

Figure 4: LF52A Specification Dimensions (all measurements in mm)

4.2 Wiring Diagram

The switch features a Single Pole Double Throw (SPDT) contact method. Connect the electrical wiring according to the diagram:

  • 1 C: Common terminal
  • 2 NO: Normally Open terminal
  • 3 NC: Normally Closed terminal

Ensure all electrical connections are secure and comply with local electrical codes. Consult a qualified electrician if you are unsure about the wiring process.

Wiring diagram for the LEFOO LF52A differential pressure switch, showing connections for Common (1 C), Normally Open (2 NO), and Normally Closed (3 NC).

Figure 5: LF52A Wiring Diagram

5. Operation

The LEFOO LF52A differential pressure switch is designed for automatic operation based on the set pressure difference. Once installed and wired correctly, it will monitor the pressure across two points in your system.

5.1 Setting the Pressure Range

The switch is adjustable to various pressure ranges as detailed in the specifications table (Table 1). Adjustment is typically done via a screw or dial on the unit. Refer to the specific model variant (e.g., LF52A-200) for its precise adjustable range. Carefully turn the adjustment mechanism to set the desired differential pressure threshold. Ensure the system is depressurized before making adjustments to prevent injury or damage.

5.2 Functionality

When the differential pressure across the two sensing ports exceeds the set threshold, the internal micro-switch will actuate, changing the state of the SPDT contacts (e.g., switching from Normally Closed to Normally Open, or vice-versa). This change in contact state can be used to trigger alarms, activate/deactivate pumps, or control other system components.

6. Maintenance

Regular maintenance helps ensure the longevity and accurate performance of your differential pressure switch.

  • Visual Inspection: Periodically inspect the switch for any signs of physical damage, corrosion, or leaks around the connections.
  • Connection Integrity: Ensure all electrical and pressure connections remain tight and secure.
  • Sensing Ports: Check the sensing ports and connecting lines for any blockages or debris that could affect pressure readings. Clean as necessary, ensuring no foreign material enters the switch.
  • Environmental Conditions: Verify that the operating ambient and medium temperatures remain within the specified ranges (-20℃ to 71℃ ambient, -20℃ to 93℃ liquid medium).
  • Calibration Check: If accuracy is critical, periodic calibration checks by a qualified technician are recommended.

7. Troubleshooting

If the differential pressure switch is not functioning as expected, consider the following common issues and their potential solutions:

ProblemPossible CauseSolution
Switch does not actuateDifferential pressure not reaching set point; clogged sensing lines; incorrect wiring; faulty switch.Verify system pressure difference; check and clear sensing lines; inspect wiring against diagram; test switch functionality or replace.
Inconsistent actuationFluctuating system pressure; debris in sensing mechanism; loose connections.Stabilize system pressure; clean sensing ports; tighten all connections.
Leakage at connectionsImproperly tightened fittings; damaged seals.Ensure fittings are tightened correctly; replace damaged seals or fittings.
Electrical malfunctionIncorrect voltage/current; damaged wiring; internal switch failure.Verify electrical supply matches specifications; inspect wiring for damage; replace switch if internal failure is suspected.

8. User Tips

  • Always ensure the system is depressurized and power is disconnected before performing any installation, adjustment, or maintenance.
  • When selecting a pressure switch, ensure the adjustable range covers your application's normal operating and alarm thresholds.
  • For optimal performance, install the switch in an easily accessible location for future adjustments and maintenance.
  • Protect the switch from excessive vibration and direct impact to maintain its accuracy and lifespan.

9. Warranty and Support

For any warranty claims, technical support, or service inquiries, please contact your original seller or distributor. Ensure you have your product model number (LF52A) and purchase details available.

10. About LEFOO

LEFOO has been dedicated to the pressure control industry for over 20 years, focusing on innovation and quality in manufacturing pressure switches and related components. The company is committed to providing reliable and high-performance products for various industrial applications.

Video: Overview of LEFOO's manufacturing process and facilities.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.