4DRC M6

Contents

4DRC M6 Remote Control RC Helicopter User Manual

Model: M6

Introduction

The 4DRC M6 is an advanced remote control helicopter designed for both beginners and experienced pilots. It features a durable, crash-resistant construction and offers stable flight characteristics. Depending on the model, it may include a 4K HD camera for aerial photography and video recording, along with smart flight modes such as Altitude Hold, Gravity Induction, and Trajectory Flight, controllable via a 2.4GHz remote or a mobile application.

4DRC M6 RC Helicopter with remote control and smartphone displaying live feed

Figure 1: 4DRC M6 RC Helicopter with remote and mobile phone control setup.

Safety Information

⚠️ Disclaimer:

This product is intended for recreational use only. Illegal modification of drones/planes is strictly prohibited. Users are responsible for adhering to all relevant laws and regulations regarding the use of drones/planes in their country or area to ensure legal and safe operation.

Always operate the helicopter in open, clear areas, away from people, animals, and obstacles. Do not fly near airports, power lines, or restricted airspace. Ensure the helicopter is always within your line of sight.

Package Contents

Please check the box contents upon unboxing. The standard package typically includes:

  • 4DRC M6 RC Helicopter
  • 2.4GHz Remote Control
  • Rechargeable Lithium Battery (for helicopter)
  • USB Charging Cable
  • Spare Propeller Blades (quantity may vary)
  • User Manual (this document)
  • Screwdriver (for battery compartment, if applicable)
Packaging box for 4DRC M6 helicopter showing dimensions

Figure 2: Example of product packaging and dimensions (30.3cm x 16.5cm x 9cm).

Specifications

Feature Detail
Product NameAerial Helicopter
ModelM6
Product Size26 x 19 x 11.5 cm
MaterialPlastic, Metal
Recommend Age14+ years
State of AssemblyReady-to-Go
Remote ControlYes
Control Channels3.5 Channels
Controller ModeMODE1
Remote Control Signal2.4G High Frequency Signal
Remote DistanceAbout 80 meters
Helicopter BatteryRechargeable Lithium Battery
Charging TimeAbout 100 minutes
Flight TimeAbout 15 minutes
Controller BatteryAA 2PCS (not included)
Video Capture Resolution4K UHD (on camera-equipped models)
Aerial PhotographyYes (on camera-equipped models)
Anti-wind Ability<10km/h
Drone WeightAbout 49g
Takeoff WeightAbout 65g
Dimensions of the 4DRC M6 helicopter and controller

Figure 3: Helicopter dimensions (26x19x11.5cm) and partial view of controller.

Setup

  1. Charge the Helicopter Battery

    Connect the helicopter's rechargeable lithium battery to the provided USB charging cable. Plug the USB cable into a suitable USB power source (e.g., computer USB port, USB wall adapter). The charging indicator will show the charging status. Charging typically takes about 100 minutes. Do not overcharge the battery.

  2. Install Remote Control Batteries

    Open the battery compartment on the back of the remote control. Insert 2 AA batteries (not included), ensuring correct polarity (+/-). Close the battery compartment securely.

  3. Pairing the Helicopter and Remote

    • Place the helicopter on a flat, level surface.
    • Turn on the helicopter's power switch. The indicator lights will flash.
    • Turn on the remote control.
    • Push the left joystick (throttle) all the way up, then all the way down. The remote will beep, and the helicopter's lights will become solid, indicating successful pairing.
  4. App Installation (for Camera Models)

    If your M6 model includes a camera and supports mobile phone control, download the dedicated app from the App Store (for iOS) or Google Play Store (for Android). Search for "4DRC" or refer to the QR code on the packaging/manual for direct download.

    Mobile phone control app download instructions with App Store and Google Play logos

    Figure 4: Mobile phone app for controlling the helicopter and accessing camera features.

Operating Instructions

Remote Control Layout and Functions

Detailed remote control layout with labeled buttons for rise/fall, forward/backward, turn left/right, obstacle avoidance switch, speed change, and light switch

Figure 5: Remote control layout showing joysticks and function buttons.

  • Left Joystick (Throttle/Yaw):
    • Push up/down: Increase/decrease altitude (Rise/Fall).
    • Push left/right: Rotate helicopter left/right (Yaw).
  • Right Joystick (Pitch/Roll):
    • Push up/down: Move helicopter forward/backward.
    • Push left/right: Move helicopter left/right (Roll).
  • Trim Buttons: Adjust for drift (Left trim, Right trim, Forward trim, Backward trim).
  • Speed Switch Button: Tap to change flight speed (multi-gear speed).
  • Light Switch Button: Long press to turn helicopter lights on/off.
  • Obstacle Avoidance Switch: Activates/deactivates automatic obstacle avoidance.

First Flight

  1. Ensure the helicopter is fully charged and the remote has fresh batteries.
  2. Perform pairing as described in the Setup section.
  3. Place the helicopter on a flat, open surface.
  4. Gently push the left joystick (throttle) upwards to take off. The helicopter features Altitude Hold for stable hovering.
  5. Use the right joystick to control direction (forward, backward, left, right).
  6. To land, slowly pull the left joystick downwards until the helicopter gently touches down.

Advanced Features (for Camera Models)

  • 4K HD Aerial Photography: Use the integrated HD camera to capture high-quality photos and videos.
  • Real-time HD Image Transmission: Connect your smartphone to the helicopter's Wi-Fi network to view live footage from the camera directly on your phone screen.
  • Mobile Phone Control: Control the helicopter directly from the app on your smartphone, offering an alternative to the physical remote.
  • Trajectory Flight: Draw a flight path on your smartphone screen within the app, and the helicopter will automatically follow the designated trajectory.
  • Diagram showing a helicopter following a pre-drawn trajectory path on a map displayed on a smartphone

    Figure 6: Trajectory flight feature, allowing the helicopter to follow a pre-drawn path.

  • Gravity Induction: Utilize your smartphone's gravity sensor to control the helicopter's movement by tilting your phone.
  • Smartphone displaying live video feed from the helicopter, showing a car race track

    Figure 7: Live broadcast feature, showing real-time aerial footage on a smartphone.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the helicopter and remote control. Do not use water or chemical cleaners.
  • Propeller Inspection: Regularly check propellers for any signs of damage (cracks, bends). Replace damaged propellers immediately to ensure safe flight.
  • Battery Care:
    • Always fully charge the helicopter battery before use.
    • Do not store batteries in a fully discharged state for extended periods.
    • Remove batteries from the remote control if not in use for a long time to prevent leakage.
    • Store batteries in a cool, dry place.
  • Storage: When not in use, store the helicopter and remote control in a cool, dry place, away from direct sunlight and extreme temperatures.

Troubleshooting

Problem Possible Cause Solution
Helicopter does not respond to remote. Not paired, low battery in remote/helicopter, remote not turned on. Ensure both are powered on and paired correctly. Replace remote batteries or charge helicopter battery.
Helicopter drifts during flight. Uneven surface during takeoff, wind interference, trim settings incorrect. Take off from a flat surface. Adjust trim buttons on the remote control. Fly in calm conditions.
Short flight time. Battery not fully charged, old battery, cold weather. Ensure battery is fully charged (approx. 100 mins). Consider replacing old batteries. Flight time may be reduced in cold temperatures.
Camera not working / No live feed. App not connected to helicopter Wi-Fi, camera not enabled, model without camera. Ensure your smartphone is connected to the helicopter's Wi-Fi network. Verify your model has a camera. Restart the app and helicopter.
Obstacle avoidance not working. Feature not activated, sensor obstruction, too close to obstacle. Ensure the obstacle avoidance switch is ON. Clean sensors if visible. The system may have limitations at very close ranges or with certain materials.

User Tips

  • Beginner-Friendly: The M6 is designed to be fall and crash resistant, making it suitable for beginners. Start with slow speeds and in open areas.
  • 4DRC M6 helicopter with text 'Get started in seconds' and 'NOVICE DROP RESISTANT VERSION'

    Figure 8: The M6 is an entry-level, drop-resistant helicopter, easy to control for novices.

  • Stable Hover: Utilize the Altitude Hold feature for easier control and stable hovering, especially when learning.
  • Practice Makes Perfect: Spend time practicing basic maneuvers in a safe environment before attempting more complex flights or using advanced features.
  • Check Environment: Always ensure you have enough space and no immediate obstacles before taking off.

Warranty and Support

For warranty information and customer support, please refer to the seller or retailer from whom you purchased the 4DRC M6 RC Helicopter. Keep your proof of purchase for any warranty claims.

If you encounter issues not covered in this manual, please contact the seller's customer service for further assistance.

© 2023 4DRC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.