1. Introduction
Thank you for choosing the Transformers TF-T32 Wireless Bluetooth Earbuds. These earbuds are designed to provide a high-quality audio experience with low latency, making them ideal for music, sports, and gaming. This manual will guide you through the setup, operation, and maintenance of your new earbuds to ensure optimal performance and longevity.
2. Package Contents
Please check the box for the following items:
- 2 x Transformers TF-T32 Bluetooth Earbuds
- 1 x Charging Case (Cool Armor Design)
- 1 x USB Type-C Charging Cable
- 1 x User Manual
- 3 x Sizes of Earphone Caps (S, M, L)

3. Product Overview
The Transformers TF-T32 earbuds feature an ergonomic design for comfortable wear and are equipped with advanced technology for superior sound and connectivity.
Key Features:
- Cool Armor Charging Case: Durable zinc alloy body with a unique design.
- Bluetooth 5.4: Enhanced anti-interference capability and stable connection.
- 13MM Cicada Wing Diaphragm: High-performance drivers for clear, detailed, and three-dimensional sound.
- 24-Hour Battery Life: Extended usage with the charging case.
- Ergonomic Design: Lightweight and comfortable for prolonged listening.
- Touch Operation: Intuitive controls for music and calls.
- Dual Microphone Design: Ensures clear voice transmission during calls.
- Dual Mode Switching: Dedicated modes for music and gaming (low latency).
- Wide Compatibility: Supports Android, iOS, and Windows devices.


4. Setup
4.1 Charging the Earbuds and Case
Before first use, fully charge the earbuds and the charging case.
- Connect the provided USB Type-C charging cable to the charging port on the case.
- Connect the other end of the cable to a USB power source (e.g., wall adapter, computer USB port).
- The indicator lights on the charging case will show the charging status.
- A full charge for the case takes approximately 1.5 hours.
- The earbuds will charge automatically when placed inside the powered charging case.

4.2 Pairing with Your Device
The TF-T32 earbuds use Bluetooth 5.4 for a stable and efficient connection.
- Open the charging case. The earbuds will automatically power on and enter pairing mode.
- On your device (smartphone, tablet, computer), go to Bluetooth settings.
- Search for available devices and select "TF-T32" from the list.
- Once connected, you will hear a confirmation sound, and the earbuds' indicator lights will change.
- The earbuds have a maximum wireless range of 10 meters.


5. Operating Instructions
5.1 Power On/Off
- Power On: Open the charging case, and the earbuds will automatically power on.
- Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off and begin charging.
5.2 Touch Controls
The TF-T32 earbuds feature smart touch operation for various functions. The touch buttons are located on the outer surface of each earbud.

| Action | Left Earbud | Right Earbud |
|---|---|---|
| Music Playback | Click: Minimum prompt sound ("dong dong") | Click: Loudest prompt sound ("dong dong") |
| Double-click: Next track | Double-click: Previous track | |
| Triple-click: Playback Control | Triple-click: Playback Control | |
| Call Management | When a call comes in, double-click to answer/end. Press and hold for 2 seconds to reject. | When a call comes in, double-click to answer/end. Press and hold for 2 seconds to reject. |
| Voice Assistant | Press and hold for 2 seconds | Press and hold for 2 seconds |
5.3 Dual Mode Switching (Music/Game)
The TF-T32 earbuds offer a dual-mode feature for optimized audio experience.
- Music Mode: Built-in AI chip for deep sound quality analysis, providing transparent and powerful audio.
- Game Mode: Stable 0.028 second ultra-low latency for synchronized audio and video, enhancing your gaming experience.
To switch between modes, refer to the touch control diagram or your device's Bluetooth settings if applicable.

6. Maintenance
6.1 Cleaning
- Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
- Do not use harsh chemicals, cleaning solvents, or strong detergents.
- Gently remove any earwax or debris from the ear tips and speaker mesh using a small, soft brush or cotton swab.
6.2 Storage
- Always store the earbuds in their charging case when not in use to protect them and keep them charged.
- Store the device in a cool, dry place, away from extreme temperatures and direct sunlight.
6.3 Water Resistance
Please note that the Transformers TF-T32 earbuds are NOT waterproof. Avoid exposure to water, rain, sweat, or any liquids to prevent damage.
7. Troubleshooting
If you encounter any issues with your TF-T32 earbuds, try the following steps:
- No Sound/Connection Issues:
- Ensure the earbuds are charged.
- Make sure Bluetooth is enabled on your device.
- Try unpairing and re-pairing the earbuds with your device.
- Ensure the earbuds are within the 10-meter Bluetooth range.
- Earbuds Not Charging:
- Check if the charging cable is securely connected to both the case and the power source.
- Ensure the charging case itself has power.
- Clean the charging contacts on both the earbuds and the case.
- One Earbud Not Working:
- Place both earbuds back into the charging case, close the lid, and then take them out again.
- Try resetting the earbuds (if a specific reset procedure is not provided, a general reset involves forgetting the device on your phone and re-pairing).
- Poor Call Quality:
- Ensure the microphones are not obstructed.
- Check your device's volume settings.
- Move to an area with less environmental noise.
If the problem persists, please contact customer support for further assistance.
8. Specifications
Here are the detailed specifications for the Transformers TF-T32 Wireless Earbuds:

| Feature | Detail |
|---|---|
| Model | TF-T32 |
| Brand Name | TRANSFORMERS |
| Bluetooth Version | V5.4 |
| Wireless Type | Bluetooth |
| Communication | Wireless |
| Maximum Wireless Range | <10m |
| Style | In-ear |
| Vocalism Principle | Dynamic |
| Driver Diameter | 13mm |
| Number of Drivers | 2 |
| Frequency Response Range | 20 - 20000Hz |
| Sensitivity | 109dB |
| Impedance Range | up to 32 Ω (32Ω) |
| Total Harmonic Distortion | 1% |
| Max Output | 10mW |
| Battery Life (Earbuds) | Approx. 5 hours (Music Listening) |
| Battery Life (Total with Case) | Up to 24 hours |
| Charging Time | Approx. 1.5 hours |
| Charging Method | Charging case |
| Connectors | Type-C |
| Rated Input | 5V === 30mA |
| Headphone Battery Capacity | 30mAh |
| Headphone Compartment Battery Capacity | 300mAh |
| Material | Metal, Plastic |
| Weight | 89.6g |
| With Microphone | Yes (Dual Microphone Design) |
| Sound Isolating | Yes |
| Active Noise-Cancellation | No |
| Volume Control | Yes |
| Control Button | Yes |
| Support APP | Yes |
| Waterproof | No |
| NFC Technology | No |
| Support Memory Card | No |
| Functions | for Video Game, Common Headphone, For Mobile Phone, HiFi Headphone, Sport, For Outdoor, For Office, For Study |
9. User Tips
- Optimal Fit: Experiment with the different sizes of earphone caps to find the most comfortable and secure fit. A good seal improves sound quality and passive noise isolation.
- Regular Charging: To prolong battery life, try to keep the charging case and earbuds regularly charged, avoiding complete discharge.
- Mode Selection: Remember to switch to 'Game Mode' for competitive gaming to benefit from the ultra-low latency, and 'Music Mode' for the best audio fidelity when listening to music.
- Clean Contacts: If you experience charging issues, gently clean the charging pins on both the earbuds and inside the case with a dry cotton swab.
10. Frequently Asked Questions (FAQ)
- Q: How do I know if the earbuds are fully charged?
- A: The charging case usually has indicator lights that change color or turn off when fully charged. Refer to the specific light patterns in the included user manual for details.
- Q: Can I use only one earbud at a time?
- A: Yes, the TF-T32 earbuds support mono mode, allowing you to use either the left or right earbud independently while the other is in the case.
- Q: What should I do if the earbuds disconnect frequently?
- A: Ensure there are no obstructions between the earbuds and your device, and that you are within the 10-meter Bluetooth range. Try restarting both the earbuds and your device, then re-pair them.
- Q: Are these earbuds suitable for intense workouts?
- A: While they have an ergonomic design, they are not waterproof. We recommend caution during intense workouts to avoid sweat damage.