1. Introduction
This manual provides detailed instructions for the KCEVE 8K Dual DisplayPort KVM Switch, designed to allow multiple computers to share two DisplayPort monitors, a keyboard, mouse, and other USB 3.0 devices. This KVM switch supports high-resolution video output up to 8K@60Hz or 4K@144Hz and offers flexible switching options for enhanced productivity.
Please read this manual thoroughly before installation and operation to ensure proper use and to prevent any potential damage or injury.
2. Important Safety Information & Warnings
Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Warning: To prevent electric shock, do not open the enclosure. There are no user-serviceable parts inside. Refer servicing to qualified personnel.
- Warning: Ensure all connected computers and peripherals are powered off before connecting or disconnecting cables to prevent potential damage.
- Caution: Do not expose the device to extreme temperatures, direct sunlight, or high humidity. Keep away from water sources to avoid short circuits.
3. Package Contents
Please check the package contents to ensure all items are present and undamaged. Contents may vary slightly depending on the specific model (302DP or 402DP).

Figure 1: Typical Packing List (402DP Model)
- 1x KCEVE Dual DisplayPort KVM Switch (302DP or 402DP model)
- 1x User Manual
- 1x DC 12V Power Adapter (1.5m/4.92ft)
- 1x Wired Remote (1.52m/4.98ft)
- 2x DP1.4 Cables (1.5m/4.92ft)
- 3x USB3.0 Cables (1.5m/4.92ft) (Note: 402DP model supports 4 PCs, but typically includes 3 USB cables. Additional USB cables may be needed for all PC connections.)
4. Product Overview
The KVM switch features multiple input and output ports for connecting your computers, monitors, and USB peripherals. Familiarize yourself with the port layout before setup.

Figure 2: KVM Switch Front and Back Panels

Figure 3: KVM Switch Port Layout (402DP Model)
- PC Inputs: Each PC requires 2 DisplayPort cables (for dual monitor output) and 1 USB 3.0 cable (for keyboard, mouse, and other USB devices).
- Monitor Outputs: Two DisplayPort outputs (OUT A, OUT B) for connecting your monitors.
- USB 3.0 Ports: For connecting your keyboard, mouse, printer, USB drives, and other USB peripherals.
- DC 12V Power Input: For connecting the included power adapter.
- Wired Remote Port: For connecting the wired remote control for switching.
- PC Selection Buttons: Buttons on the front panel to manually switch between connected computers.
5. Setup Instructions
Follow these steps to set up your KCEVE KVM Switch:
- Power Down: Power down all connected computers and peripherals before making any connections.
- Connect Console Devices: Connect your keyboard, mouse, and monitors to the Console ports on the KVM Switch.
- Connect Computers: Connect the KVM cables from the CPU ports on the switch to the corresponding ports on each computer. Each computer requires two DisplayPort cables (for dual monitor output) and one USB 3.0 cable (for keyboard, mouse, and other USB devices).
- Power On: Power on the computers, then power on the monitors.
- Power the KVM: Connect the provided DC 12V power adapter to the KVM switch and plug it into a power outlet.
- Initial Power On: Press and hold the power button on the KVM switch for 3 seconds to turn on the device.

Figure 4: Connection Diagram (302DP Model)
Important Notes on Video Connections:
- This Dual Monitor KVM Switch DisplayPort requires 2* DP + 1* USB input for each computer and 2* DP output for 2 monitors.
- If your computer/laptop does not have two DisplayPort outputs, you may need adapters. However, using adapters (e.g., HDMI to DP, USB-C to DP) can reduce resolution and is generally not recommended.
- Most reasons for only one video output are due to incorrect connections. Please ensure that each computer has (2 DP cables + 1 USB cable) connected to the KVM.
- The KVM does not support HDMI/DVI/VGA to DP adapters for input.
6. Operating Instructions
Switching Between Computers
You can switch between connected computers using two methods:

Figure 5: Switching Methods
- Physical Button Switch: Short press the PC selection buttons (PC1, PC2, PC3, PC4) on the front panel of the KVM switch to cycle through the connected computers. An LED light indicates which computer is currently active.
- Wired Remote Switch: Use the wired remote control to switch between computers. Press the button on the remote to cycle through the inputs.
Display Modes
The KVM switch supports two primary display modes for your dual monitors:

Figure 6: Mirror Mode vs. Extended Mode
- Mirror Mode (Duplicate): Both monitors display the same image from the selected PC.
- Extended Mode: The two monitors display different images, extending your desktop across both screens.
Setting Output Mode in Windows OS
To set the display mode in Windows, press the "Windows + P" shortcut on your keyboard. A small window will pop up, allowing you to choose between "Duplicate" mode (Mirror) or "Extend" mode.
Video 1: How to set output mode (Duplicate/Extend) in Windows OS.
7. Specifications
| Feature | Description |
|---|---|
| Product Name | KVM Switch |
| Model Numbers | 302DP / 402DP Series (e.g., 8202DH, 302AS, 203DH, 402DH, etc.) |
| Type | Cable Adapter (KVM Switch) |
| Video Inputs | DisplayPort (2 per PC) |
| Video Outputs | DisplayPort (2 for monitors) |
| USB Inputs | USB 3.0 (1 per PC) |
| USB Peripheral Ports | 4 x USB 3.0 Ports |
| Max Resolution | 8K@60Hz (7680x4320), 4K@144Hz (3840x2160) |
| USB Data Transfer Rate | Up to 5Gbps (USB 3.0) |
| Switching Methods | Physical Button, Wired Remote |
| Operating Systems | Linux, Windows, Chrome OS, Mac OS |
| Power Supply | DC 12V |
| Assembly Required | No |
| Certifications | CE, FCC, RoHS |
| Dimensions (approx.) | 21cm (L) x 8cm (W) x 3cm (H) for 302DP; 16.2cm (L) x 6.6cm (W) x 4.4cm (H) for 402DP |
| Weight (approx.) | 1.0 kg |
Note: Specifications are subject to change without prior notice.
8. Troubleshooting
If you encounter issues with your KVM switch, please refer to the following common problems and solutions:
- No Video Output or Only One Monitor Working:
- Ensure all computers and monitors are powered on.
- Verify that each computer has two DisplayPort cables and one USB cable correctly connected to the KVM switch. Incorrect or incomplete cabling is the most common cause.
- Check that the KVM switch itself is powered on via the DC 12V adapter.
- Confirm that the correct PC input is selected on the KVM switch (indicated by the LED).
- If using adapters (e.g., HDMI to DP, USB-C to DP) for your computer's video output, ensure they are powered (if required) and functioning correctly. Adapters can sometimes cause compatibility or resolution issues.
- Try connecting the monitors directly to the computer to rule out monitor or cable issues.
- Resolution Issues (e.g., not achieving 8K/4K):
- For 8K resolution, ensure that your computers, monitors, and all DisplayPort cables (especially those connecting the KVM to the monitors) support 8K. Use high-standard DP cables (less than 1 meter recommended for 8K).
- Using video adapters (HDMI to DP, USB-C to DP) can limit the maximum resolution. Direct DisplayPort connections are recommended for optimal performance.
- Check your computer's display settings to ensure the desired resolution and refresh rate are selected.
- Window Position Shifts After Switching:
- This KVM switch (like most DisplayPort KVMs) does not support EDID emulation. After switching, the window position of the original display information may be shifted. This is a characteristic of DisplayPort technology and not a defect of the product.
- USB Devices Not Working or Unstable:
- Ensure the USB 3.0 cables from each PC are securely connected to the KVM switch.
- For high-power USB devices (e.g., external hard drives), ensure the KVM switch is properly powered by the DC 12V adapter.
- Try connecting the USB device directly to the computer to verify its functionality.
9. User Tips
- The KVM switch is designed to be compact yet sturdy. Its weight helps it stay in place on your desk even with multiple cables connected.
- For optimal video performance, especially at 8K resolutions, use high-quality DisplayPort cables and minimize the use of video adapters.
- Always power down computers and the KVM switch before connecting or disconnecting cables to prevent potential damage.
10. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid or aerosol cleaners.
- Storage: After use, turn off the device and store it in a dry place, away from children.
- Handling: Handle the device with care. Avoid dropping or subjecting it to strong impacts.
11. Warranty & Support
Compliance Information
This product complies with the following EU Directives:
- Electromagnetic Compatibility (EMC): EN 55032 / EN 55035
- Low Voltage Directive (LVD) / RoHS: EN 62368-1 / Directive 2011/65/EU
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference...
Manufacturer Information
Company Name: SHENZHEN YIJIARN DIGITAL TECHNOLOGY CO., LTD
Full Address: 1B-077, Phase II, South China International Leather Raw Materials Logistics Zone, No. 1 South China Avenue, Hehua Community, Pinghu Street, Longgang District, Shenzhen City, Guangdong Province
Email: Seven6683@163.com
EU Authorized Representative
AR Company Name: PROCONSEIL FR
Full Address: 8 bis rue Abel 75012 Paris, France
Email: SophieDupont@proconseilfr.com
For further assistance or support, please contact the manufacturer directly using the provided contact information.
A PDF version of this user manual is available for download from the product page or by contacting customer support.