WOWUSEFUL Digital Dashboard Cluster User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your WOWUSEFUL Digital Dashboard Cluster. Please read this manual thoroughly before installation and use to ensure proper functionality and to maximize your driving experience.

The Digital Dashboard Cluster is designed to replace your vehicle's traditional instrument panel with a modern, high-definition display, offering enhanced features and real-time vehicle information.

2. Safety Warnings

⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Always ensure the vehicle is turned off and the battery is disconnected before performing any installation or maintenance to prevent electrical shock or damage to the vehicle's systems.

3. Applicable Models and Years

This Digital Dashboard Cluster is compatible with the following vehicle models and years:

• For VW T6.1 Multivan Transporter: 2019-2023
• For Skoda Superb MK3: 2014-2020
• For Skoda Kodiaq / Karoq / Kodiak: 2017-2020
• For VW Crafter: 2019-2022
• For VW T5.1 Caravelle/Multivan/Transporter: 2010-2015
• For VW T6 Caravelle/Multivan/Transporter: 2016-2020
• For Skoda Octavia: 2008-2013
• For Skoda Octavia: 2014-2018

If your specific model is not listed or you have questions about compatibility, please contact your seller.

4. Key Features

• Operating System: Linux (car level configuration, excellent stability and safety, fast boot <2S).
• Display: 12.3-inch HD IPS screen with 1920x720 resolution.
• Vehicle Data Support: Displays original Miles/KM, Band Pressure, Oil/Water Temperature, Oil Pressure, Fuel Consumption, Auto Body Balance, and more.
• Display Modes: Choose from 3 or 4 modes (Simple, Comfort, Technology, Track) and 4 theme colors.
• Customization: Auto-color change capability.
• Processor: T5 1.5Ghz CPU.
• Installation: Easy Plug and Play, no wire cutting required.
• Power: Factory voltage 9V-16V, Operating Current 0.8A-1.5A, Standby Current less than 3MA.
• Multilingual Support: Supports English, Russian, German, French, Spanish, Italian, Korean, Japanese, Arabic, Turkish, and other languages.
• Material: ABS.

5. Installation Guide

For a visual guide, please refer to the installation video: https://youtu.be/f26qOxo5Gw?si=Po7XSHUTNfU2ESSC

5.1. Pre-Installation Checks

1. Set Speed Limit and Turn Off Winter Tires: Before installing the digital cluster, set the speed limit alarm to 250 km/h and turn off the winter tire setting in your original vehicle system.

   

   Image: Speed limit and winter tire settings on the original dashboard.

2. Keep Original Buzzer: If your original car motherboard has a buzzer, please keep it. Failure to do so may result in the alarm not sounding or other functions not working correctly.

   

   Image: Original car motherboard with buzzer highlighted.

3. Keep Small Motherboard: If your original car dashboard cluster includes a small motherboard, as shown in the picture, please retain it and install it with the new digital cluster.

   

   Image: Small motherboard component.

5.2. Connection Procedures

4. HDMI Connection: Connect the HDMI port on the digital cluster to an HDMI cable. Then, connect the HDMI cable to an HDMI exchange box, and finally, connect the HDMI exchange box to the USB port of your Android player. After successful connection, open the digital cluster, navigate to the navigation interface, and press the down button to activate the function.

   

   Image: HDMI connection diagram.

5. CarPlay Connection: Access the "CarPlay" option. Once connected, press the button to open the menu, where you can adjust the region or switch devices. "Adjust region" refers to the interface display zone. "Switch device" allows switching between CarPlay, AirPlay, Android Auto, and HiCar. If your car has an Android phone, select Android Auto to connect directly via Bluetooth.

   

   Image: CarPlay connection diagram.

6. Radio Display Zone Set: In the settings, under preferences, you can adjust the zoom ratio for the radio display zone from 1.0 to 0.** as desired.

   

   Image: Radio Display Zone settings interface.

6. Operating Instructions

6.1. User Manual Settings

1. Fuel Tank Set: If the fuel tank level is inaccurate, fill the tank completely first. Then, proceed with the setup, remembering the full value. Enter the values in the designated fields.

   

   Image: Fuel Tank settings interface.

2. Car Type Set: Go to the settings, select "Car Type," and choose your relevant car model. Turn off the engine, then the power, lock the car, and wait for 5 minutes before starting. This ensures proper functionality.

   

   Image: Car Type settings interface.

3. Speed Calibration: In the dashboard settings, under "Calibration Settings" (second item), enter the difference between the displayed speed and the actual speed. This allows the average speed value to be calibrated.

   

   Image: Speed Calibration settings interface.

4. Consumption Set: In the dashboard settings, under "Calibration Settings" (third item), change the mode to manual. Then, enter the difference between the actual displayed consumption and the real consumption value. This calibrates the average consumption value.

   

   Image: Consumption Set settings interface.

5. Unit Set - PQ Platform: Configure units for Distance, Vehicle Speed, Volume, Consumption, Temperature, Pressure, and Time.

   

   Image: Unit Set settings interface.

6. Preference Set: Access preferences to configure various settings including oil pressure detection, physical light, mirror back behavior, manual transmission, race mode, boot sound, tire pressure, MIL check, phone mirror, rear door follow, brake pad inspection, voltage display frequency, reverse left and right, width indicator light, and movement controls (up/down, left/right, zoom ratio, time source).

   

   Image: Preference Set settings interface.

7. Dashboard Type Set: In the dashboard type settings, you can configure the sport speed and RPM (6000 RPM for diesel or 8000 RPM for gas).

   

   Image: Dashboard Type settings interface.

8. Language Set: Access the language settings to choose from approximately 20 different language options.

   

   Image: Language settings interface.

9. LHD/RHD Configuration Set: If your vehicle is Right-Hand Drive (RHD), go to the configuration settings and adjust it to LHD or RHD as appropriate.

   

   Image: LHD/RHD Configuration settings interface.

10. Trip Set: To reset trip data, go to travel data, press OK, select "Reset Trip," and confirm with OK.

    

    Image: Trip Set settings interface.

11. Golf 8 Theme Change: To switch between Golf 8 and Golf 7 themes, go to settings, then "Theme," select G8 or G7, and press OK to apply.

    

    Image: Theme Change settings interface.

7. Maintenance

The Digital Dashboard Cluster is designed for durability and minimal maintenance. Keep the screen clean with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the display.

For firmware, software, UI, and GPS navigation map updates, these are provided free of charge. Please contact customer service for instructions on how to perform updates.

8. Troubleshooting

• Buzzer Not Working: Ensure the original car motherboard buzzer was retained during installation. If not, the alarm may not sound.
• Car Not Starting After Installation: If the car does not start initially, try pulling and re-inserting the plugs a few times. Also, check for compatibility with non-standard alarms or immobilizers; these may need to be removed or reconfigured.
• Check Engine Light: If the check engine light remains on or appears unexpectedly, consult a professional mechanic.
• Display Issues: If you experience any display anomalies, ensure all connections (especially HDMI) are secure.
• General Issues: For any other issues, refer to the installation video or contact customer support.

9. Specifications

10. User Tips

• Russian Font: Some users have noted that the Russian font may appear crooked or problematic. Consider using English or another preferred language if this is an issue for you.
• Tight Fit: The unit may fit tightly during installation. This is normal; ensure it is firmly snapped into place without leaving gaps. Slight filing of the case might be necessary in some instances.
• Non-Standard Alarms/Immobilizers: Be aware that the new unit might not be compatible with non-standard alarms or immobilizers. You may need to remove or reconfigure such systems for the digital dashboard to function correctly.

11. Frequently Asked Questions (FAQ)

Q: Is this compatible with a Skoda Octavia VRS MK2 2.0TDI DSG 2010?

A: Yes, the product is listed as compatible with "For Skoda Octavia: 2008-2013" and "For Skoda Octavia: 2014-2018", which includes your 2010 model.

Q: Does it fit a Crafter 2020?

A: Yes, it is compatible with "For VW Crafter: 2019-2022", so your 2020 Crafter should work.

Q: Is Ukrainian language available?

A: The product supports a wide range of languages including English, Russian, German, French, Spanish, Italian, Korean, Japanese, Arabic, and Turkish. While Ukrainian is not explicitly listed, the "etc multilingual" note suggests it might be available or added in future updates. Please check with the seller for the most current language support.

Q: Can I change the car's welcome screen to match my vehicle type (e.g., station wagon instead of sedan)?

A: The manual mentions "Golf 8 car model option" and "Golf 8 different theme change," indicating that customization of the displayed car models is possible within the settings.

12. Warranty and Support

WOWUSEFUL is committed to providing high-quality products and excellent customer service.

• Warranty: We offer a 2-year warranty on this product.
• Customer Service: 24-hour customer service is available to assist you with any questions or issues.
• Updates: Free updates for firmware, software, UI, and GPS navigation maps are provided.
• Returns & Refunds: If the product has a problem within 365 days after receipt confirmation, free return and refund are supported within 15 days. Alternatively, we can replace the machine directly for you. Please contact us first to communicate any issues.
• Technical Assistance: We have an engineer team available to assist with installation and technical queries.

For support, please contact your seller directly.