JINGSHA X99 PLUS Motherboard Set Kit User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your JINGSHA X99 PLUS Motherboard Set Kit. This kit is designed for high-performance computing, supporting Intel Xeon E5 V3/V4 CPUs and DDR4 ECC REG RAM, making it suitable for gaming, office, workstation, scientific computing, and video rendering applications.

Please read this manual thoroughly before proceeding with installation to ensure proper setup and optimal performance.

2. Package Contents

Verify that all items listed below are included in your package:

• 1 x JINGSHA X99S D4 PLUS LGA2011 Motherboard
• 1 x Intel Xeon E5 1650 V4 CPU (6 cores/12 threads, 3.6GHz)
• 4 x DDR4 8GB 2133MHz ECC REG RAM (Total 32GB)
• 1 x SATA Cable
• 1 x Backplane (I/O Shield)
• 1 x LGA2011-3 CPU Radiator Bracket

3. Specifications

Key specifications for the JINGSHA X99S D4 PLUS Motherboard and included components:

4. Setup Instructions

Follow these steps carefully to install your JINGSHA X99 PLUS Motherboard Set Kit components.

4.1. CPU Installation

1. Prepare the Socket: Press the wire buckle on the CPU socket by hand and lift it up. Remember not to remove the black cover before installing the CPU.
2. Align the CPU: The motherboard base has 3 bayonets (red circles in the figure). The CPU itself also has corresponding alignment points. Align them one by one, then gently place the CPU into the socket.
3. Secure the CPU: Lower the wire buckle that was lifted up, and the black cover on the socket will pop up automatically. Remember not to remove the black cover before installing the CPU.

Precautions:

• Do not open the CPU top cover.
• Do not touch the CPU pins to contact the core.
• Do not touch the motherboard interface pins.

4.2. RAM Installation

The motherboard features 4 DDR4 memory slots supporting dual-channel architecture up to 128GB. Install the included 4x 8GB DDR4 2133MHz ECC REG RAM modules into the designated slots. Ensure the notches on the RAM modules align with the keys in the memory slots, then press down firmly until the clips on both sides snap into place.

4.3. Storage Device Installation

The motherboard supports both NVMe M.2 and NGFF M.2 SSDs, as well as SATA drives.

• M.2 SSDs: Locate the M.2 slots on the motherboard. Insert your NVMe or NGFF M.2 SSD into the appropriate slot at an angle, then gently push it down and secure it with the provided screw.
• SATA Drives: Connect your SATA hard drives or SSDs to the available SATA 3.0 or SATA 2.0 ports using the included SATA cable. Ensure the power cable from your power supply is also connected to the SATA drive.

4.4. Power Supply Connection

This motherboard platform requires a powerful power supply. Ensure your power supply unit (PSU) can provide at least 500W. Connect the ATX 24-pin main power connector and the AUX12V 8-pin CPU power connector from your PSU to the corresponding ports on the motherboard.

4.5. Connecting Peripherals and Front Panel

Refer to the motherboard layout diagram (Figure 5) for the location of various headers and ports:

• Front Panel Headers: Connect your case's front panel connectors (Power SW, Reset SW, HDD LED, Power LED) to the F_PANEL header.
• USB Ports: Connect front panel USB 3.0 and USB 2.0 ports to the F_USB3.0 and F_USB2.0 headers respectively.
• Audio: Connect your case's front audio jack to the F_AUDIO header.
• Fan Connectors: Connect CPU fans to the 4-pin CPU_FAN header and system fans to the 3-pin SYS_FAN headers.
• Back I/O Ports: Connect your keyboard and mouse to the PS/2 ports, network cable to the Gigabit Ethernet port, and audio devices to the 3-in-1 Audio jacks.

5. Operating Instructions

Once all components are correctly installed and connected, you can power on your system. The JINGSHA X99 PLUS Motherboard Set Kit is designed for stable and efficient operation across various demanding applications.

• First Boot: Upon the first boot, access the BIOS/UEFI settings to configure boot order, check component recognition, and adjust any necessary settings.
• Driver Installation: Install the necessary drivers for the chipset, audio, network, and any other integrated components from the manufacturer's website or included media.
• System Usage: This kit is optimized for tasks such as gaming, office productivity, workstation applications, scientific computing, and video rendering, offering a high-performance-to-price ratio.

6. Maintenance

Proper maintenance ensures the longevity and stability of your motherboard and components.

• Dust Removal: Regularly clean dust from the motherboard and components using compressed air. Ensure the system is powered off and unplugged before cleaning.
• BIOS Updates: Periodically check the JINGSHA website for BIOS/UEFI updates to improve compatibility and performance.
• CR2032 Battery: The CR2032 battery on the motherboard powers the CMOS for BIOS settings and real-time clock. If your system loses time or BIOS settings, the battery may need replacement.

Note on CR2032 Battery:

The CR2032 battery is removed from the motherboard before shipping due to postal and customs regulations. You will need to install a new CR2032 battery upon receiving the product for the CMOS to function correctly.

7. Troubleshooting

• No Power:
  • Ensure the power supply is connected correctly to both the motherboard (24-pin and 8-pin) and the wall outlet.
  • Verify the power supply unit (PSU) is switched on.
  • Check front panel power switch connections to the motherboard.
• No Display:
  • Ensure the graphics card is properly seated in the PCI-E slot and connected to the power supply (if required).
  • Verify the monitor cable is securely connected to the graphics card and the monitor.
  • Test with a different monitor or graphics card if possible.
• System Instability/Crashes:
  • Check RAM modules are correctly seated in their slots.
  • Ensure CPU cooler is properly installed and making good contact with the CPU.
  • Verify all power connections are secure.
  • Update BIOS/UEFI and drivers to the latest versions.
• Component Not Detected:
  • Reseat the component (e.g., M.2 SSD, SATA drive, RAM).
  • Check BIOS/UEFI settings to ensure the component is enabled.
  • Verify power and data cables are securely connected.

8. User Tips

• Power Supply: Always use a reliable power supply of at least 500W to ensure stable operation, especially with high-performance components.
• CPU Warranty Label: The CPU comes with a warranty label on its back. Do not tear it off, as it is required for warranty claims. Its presence does not affect CPU usage.
• TPM Support: While the motherboard supports various features, specific TPM (Trusted Platform Module) versions (e.g., TPM 2.0) may require a dedicated module or specific BIOS settings. Check the BIOS for TPM options or consult JINGSHA support for compatibility with specific TPM modules if needed for operating system requirements.

9. Warranty and Support

The CPU and memory included in this kit are used but in good condition and come with a 1-year warranty. For any technical issues or support inquiries, please contact the seller or JINGSHA customer service.

For additional information or troubleshooting, refer to the official JINGSHA website or support forums.