1. Introduction
The Tebe LE Audio LC3 Bluetooth 5.4 Audio Transmitter is a compact device designed to add Bluetooth audio transmission capabilities to devices that lack native Bluetooth support. Featuring a built-in QCC3086 chip, it supports advanced audio codecs including LE Audio LC3 and Auracast broadcast audio. This allows for high-quality, low-latency audio transmission to a single Bluetooth device or simultaneous broadcasting to multiple Auracast-enabled headphones or speakers.
Note: This device is not suitable for use with hearing aids.
The transmitter supports low latency gaming (48KHz 24bit) and high quality audio (48KHz 24bit) for an enhanced audio experience.
2. Package Contents
Please check the box for the following items:
- 1 x Tebe Bluetooth 5.4 Audio Transmitter (Model: LE101)
- 1 x USB-A to Type-C Adapter
- 1 x User Manual
3. Product Overview
Familiarize yourself with the components and controls of your Tebe Audio Transmitter.
Diagram showing the transmitter's dimensions, USB-C power/audio input, indicator light, function button, and mode switch.
3.1. Controls and Indicators
- Power Supply / Audio Input: USB Type-C port for connecting to source devices.
- Indicator Light: Displays current status and audio codec.
- Function Button: Multi-functional button for various operations depending on the mode.
- Mode Switch: Toggles between "Acast" (Auracast Broadcast Mode) and "BT LE" (Bluetooth Transmission Mode / LE Audio Mode).
3.2. Function Button Operations (BT LE Mode)
- Audio Codec Change: Single click the button.
- Call Voice ON/OFF: Double click the button.
- Enter LE Audio Pairing Mode (Priority): Long press the button for approximately 2 seconds until the Red and Blue LEDs flash quickly.
- Enter Traditional Bluetooth Pairing Mode (Priority): While Red and Blue LEDs are flashing quickly (LE Audio pairing mode), long press the button again for approximately 2 seconds until the Red and Blue LEDs flash slowly.
4. Specifications
| Feature | Detail |
|---|---|
| Brand Name | tebe |
| Model Number | LE101 |
| Wireless Version | QCC 5.4 |
| Wireless Protocol | A2DP, HFP, AVRCP, LE Audio, AURACAST |
| Frequency Range | 2.402GHz - 2.480GHz |
| Frequency Response | 100Hz - 20kHz |
| Transmission Distance | Auracast Mode: 15m (barrier-free) Bluetooth Transmitter Mode: 10m (barrier-free) |
| Auracast Support | Yes, supports multiple receiving devices |
| Signal to Noise Ratio | >90dB |
| Input Method | USB driver-free |
| Audio Formats | SBC, aptX, aptX-LL, aptX-HD, aptX-AD, LE Audio (LC3) |
| Microphone Support | Supported in BT LE mode, not supported in Auracast mode |
| Compatible Systems | WIN-ALL, Linux, Apple computer, PS4/5, Android |
| Chipset | QCC3086 |
| Interface | Type-C |
| Support Apt-x | Yes |
| Support AAC | No |
| Support Memory Card | No |
| Sound Track | Double |
| Certification | CE |
| Note | Not suitable for use with hearing aids |
The transmitter offers a barrier-free range of 15m in Auracast mode and 10m in Bluetooth Transmitter mode.
5. Setup
Follow these steps to set up your Tebe Audio Transmitter:
- Connect the Transmitter: Insert the Type-C connector of the transmitter into a compatible USB Type-C port on your source device (e.g., PC, Laptop, PS4/5, TV). If your device only has a USB-A port, use the provided USB-A to Type-C adapter.
- Power On: The transmitter will power on automatically once connected to a powered USB port.
- Select Mode: Use the physical mode switch on the side of the transmitter to select your desired operating mode:
- "Acast" for Auracast Broadcast Mode.
- "BT LE" for Bluetooth Transmission Mode (traditional Bluetooth) or LE Audio Mode.
- Prepare Receiving Device: Ensure your wireless headphones or speakers are in pairing mode.
The transmitter seamlessly integrates with laptops and other devices to provide wireless audio.
6. Operating Modes
6.1. LE Audio Mode
This mode utilizes the new Bluetooth LE Audio technology with LC3 decoding for high-quality and low-latency audio. It prioritizes pairing with LE Audio-enabled devices.
- Set the mode switch to "BT LE".
- Long press the function button for approximately 2 seconds until the Red and Blue LEDs flash quickly. This indicates the transmitter is in LE Audio pairing mode.
- Place your LE Audio-enabled wireless headphones or speakers into pairing mode.
- The transmitter will automatically connect to your device.
- If your headphones do not support LE Audio but are in pairing status, they will connect in traditional Bluetooth mode after successful pairing.
- Microphone Support: Yes.
6.2. Traditional Bluetooth Mode
This mode supports standard Bluetooth audio codecs like SBC and aptX series. It prioritizes pairing with traditional Bluetooth devices.
- Set the mode switch to "BT LE".
- To enter traditional Bluetooth pairing mode, first ensure the Red and Blue LEDs are flashing quickly (LE Audio pairing mode). Then, long press the function button again for approximately 2 seconds until the Red and Blue LEDs flash slowly.
- Place your traditional Bluetooth wireless headphones or speakers into pairing mode.
- The transmitter will automatically connect to your device.
- If your headphones do not support traditional Bluetooth but are in pairing status, they will connect in LE Audio mode after successful pairing.
- Microphone Support: Yes.
Charts comparing delay estimates and transmission bit rates for various aptX encodings (SBC, aptX, aptX LL, aptX HD). Lower delay means faster speed, higher bit rate means better sound quality.
6.3. Auracast Broadcast Mode
This mode allows the transmitter to broadcast audio to multiple Auracast-enabled receiving devices simultaneously.
- Set the mode switch to "Acast".
- Turn on your Auracast-enabled wireless headphones or speakers and ensure they are ready to receive a broadcast.
- The transmitter will automatically broadcast the audio, and compatible devices within range will pick up the signal.
- Important: Wireless headphones/speakers must support Auracast to receive the broadcast signal.
- Microphone Support: No.
Diagram illustrating how Auracast Broadcast Audio transmits signals from a USB-C source to multiple Auracast-enabled headphones or speakers.
7. LED Indicator Status
The LED indicator provides visual feedback on the transmitter's status and the active audio codec.
| Status / Mode | LED Indicator | Explanation |
|---|---|---|
| LE Audio Pairing Mode | Red and Blue LEDs quickly flash | Prioritizes pairing with LE Audio devices. |
| Traditional Bluetooth Pairing Mode | Red and Blue LEDs slowly flash | Prioritizes pairing with traditional Bluetooth devices. |
| Connected (General) | LED steady on (color varies by codec) | Indicates a successful connection. |
| Call Voice Status | Blue LED slow flash | Indicates active call voice. |
| Restore Factory Settings | Red and Blue LEDs flash alternately (after ~6s hold) | Indicates successful factory reset. |
| Audio Codec Indicators (Connected State) | ||
| LE Audio (LL audio codec) | Green LED steady on | Low Latency audio codec. |
| LE Audio (HQ audio codec) | White LED steady on | High Quality audio codec. |
| Bluetooth (SBC) | Blue LED steady on | Standard Bluetooth audio codec. |
| Bluetooth (aptX) | Cyan LED steady on | aptX audio codec. |
| Bluetooth (aptX-HD) | Green LED steady on | aptX High Definition audio codec. |
| Bluetooth (aptX-Lossless) | Red LED steady on | aptX Lossless audio codec. |
| Bluetooth (aptX-LL) | White LED steady on | aptX Low Latency audio codec. |
| Bluetooth (aptX-AD) | Orange LED steady on | aptX Adaptive audio codec. |
8. Troubleshooting
- No Audio Output:
- Ensure the transmitter is correctly plugged into the source device's Type-C port.
- Verify that your headphones/speakers are powered on and in pairing mode (or already paired).
- Check the volume levels on both your source device and your headphones/speakers.
- Confirm the correct operating mode (LE Audio, Traditional Bluetooth, or Auracast) is selected via the mode switch.
- Unable to Pair:
- Make sure the transmitter is in the correct pairing mode (fast flash for LE Audio priority, slow flash for Traditional Bluetooth priority).
- Ensure your headphones/speakers are also in pairing mode and within the transmission range (10-15 meters).
- Try resetting both the transmitter (long press button for ~6 seconds until Red and Blue LEDs flash alternately) and your receiving device.
- If using Auracast mode, confirm your receiving devices explicitly support Auracast.
- Microphone Not Working:
- Microphone functionality is supported in LE Audio and Traditional Bluetooth modes. It is NOT supported in Auracast Broadcast Mode.
- Ensure your headphones have a built-in microphone and it is enabled.
- Unsure of Current Working Mode:
- You can determine the working mode by single-clicking the transmitter button and observing the LED changes. Refer to the "LED Indicator Status" table for details.
9. User Tips
- Hearing Aids: This device is explicitly noted as not suitable for use with hearing aids.
- Auracast Compatibility: For Auracast Broadcast Mode to function, all receiving wireless headphones or speakers must specifically support Auracast technology.
- Codec Prioritization: The transmitter attempts to connect using the prioritized codec for the selected pairing mode (LE Audio or Traditional Bluetooth). If the receiving device doesn't support the prioritized codec but is in pairing mode, it will attempt to connect using the other available mode.
- Multi-Device Auracast: Auracast mode is designed to transmit audio to multiple compatible headphones/speakers simultaneously, offering a shared listening experience.
- Single-Device Bluetooth/LE Audio: In BT LE mode, the transmitter connects to one pair of headphones/speakers at a time for private listening.
10. Warranty and Support
For detailed warranty information and further technical support, please refer to the official Tebe documentation or contact Tebe customer service.
A comprehensive user manual in PDF format is available for download: View User Manual (PDF)
For any issues not covered in this manual, please reach out to the manufacturer, tebe, for assistance.