Introduction
Thank you for choosing the PROYAMA 42.7cc Adjustable Pole Chainsaw. This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your new tool. Please read it thoroughly before use and keep it for future reference.

Safety Information
Always wear appropriate personal protective equipment (PPE) when operating the pole chainsaw, including:
- Safety glasses or face shield
- Hearing protection (earmuffs)
- Heavy-duty gloves
- Long pants and sturdy, non-slip footwear
- The ergonomic harness provided to distribute load and maintain balance.
Ensure the work area is clear of bystanders, pets, and obstacles. Do not operate the tool in wet conditions or near power lines. Always maintain a firm grip on the tool and be aware of the chain's position.
Setup and Assembly
1. Unpacking and Inspection
Carefully remove all components from the packaging. Inspect for any damage. The package should include:
- Main engine unit
- Pole saw attachment with rotary head
- 3ft extension pole
- 12" OREGON bar and chain
- Ergonomic harness
- Rubber front grip
- Carrying bag
- Earmuffs
- Face shield
2. Attaching the Pole Saw and Extension
The pole saw features a tool-less coupler for easy assembly. Connect the pole saw attachment to the main engine unit. If additional reach is required, insert the 3ft extension pole between the engine unit and the pole saw attachment. Ensure all connections are secure before use.
3. Installing the Bar and Chain
- Ensure the engine is off and cool.
- Remove the chain cover.
- Place the chain around the sprocket and guide bar, ensuring the cutting edges face the correct direction.
- Reinstall the chain cover and tighten the nuts, leaving them slightly loose for tension adjustment.
- Adjust chain tension: The chain should be snug against the guide bar but still able to be pulled around by hand.
- Fully tighten the chain cover nuts.
4. Fuel and Oil Mixture
This unit uses a 2-stroke engine and requires a 50:1 fuel mix (50 parts unleaded gasoline to 1 part 2-stroke engine oil). Use fresh, high-quality unleaded gasoline and a reputable 2-stroke engine oil. Mix thoroughly in a separate, approved fuel container before adding to the fuel tank. The fuel tank capacity is 0.3 gallons.
Fill the oil tank with appropriate chain lubricant. The oil tank volume is 0.4 US pint.

Operating Instructions
1. Starting the Engine
- Place the unit on a flat, stable surface.
- Ensure the throttle control is in the START position.
- Engage the choke (if applicable, refer to engine specific instructions).
- Press the primer bulb several times until fuel is visible.
- Pull the starter cord firmly and smoothly until the engine starts.
- Once started, disengage the choke gradually.
2. Using the Pole Saw
The pole saw can reach up to 15 feet (including user height), allowing for safe pruning and limbing from the ground. The multi-angle adjustable cutting head offers a full 90-degree rotary angle for flexible cutting of various branches.
- Always maintain a balanced stance.
- Use the ergonomic harness to support the tool's weight and reduce fatigue.
- Start cutting with the chain at full speed.
- Make small, controlled cuts. Avoid forcing the saw.
- Be aware of falling branches and clear the area below.

Maintenance
Regular maintenance ensures the longevity and optimal performance of your PROYAMA pole chainsaw.
1. After Each Use
- Clean the guide bar and chain, removing sawdust and debris.
- Check chain tension and adjust if necessary.
- Inspect the chain for sharpness and damage. Sharpen or replace as needed.
- Wipe down the engine unit and poles.
- Check for loose fasteners and tighten them.
2. Engine Maintenance
- Air Filter: Clean or replace the air filter regularly to ensure proper engine breathing and prevent overheating.
- Spark Plug: Inspect and clean the spark plug periodically. Replace if worn or fouled.
- Fuel Filter: Check and replace the fuel filter as part of routine maintenance.
- Cooling Fins: Keep the engine's cooling fins clean to prevent overheating.
3. Chain and Bar Maintenance
- Chain Sharpening: A sharp chain is crucial for efficient and safe cutting. Sharpen the chain regularly using appropriate tools or have it professionally sharpened.
- Bar Lubrication: Ensure the automatic oiler is functioning correctly and the oil reservoir is filled with chain lubricant.
- Bar Inspection: Check the guide bar for wear, burrs, or damage. Flip the bar periodically to ensure even wear.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine won't start | No fuel, incorrect fuel mix, fouled spark plug, clogged fuel filter, choke not engaged/disengaged correctly. | Check fuel level and mix. Clean/replace spark plug. Clean/replace fuel filter. Adjust choke. |
| Poor cutting performance | Dull chain, incorrect chain tension, insufficient bar oil. | Sharpen/replace chain. Adjust chain tension. Refill bar oil reservoir. |
| Engine stalls during operation | Clogged air filter, improper fuel mix, overheating. | Clean air filter. Verify fuel mix. Allow engine to cool. |
| Excessive vibration | Loose components, damaged chain/bar. | Check and tighten all fasteners. Inspect chain and bar for damage. |
Specifications
| Feature | Detail |
|---|---|
| Engine Type | 42.7cc Professional-Grade 2-Stroke Engine |
| Max Engine Power | 2 HP |
| Guide Bar Length | 12 inches (OREGON Bar) |
| Chain Type | OREGON Chain, 45 Drive Link, 3/8 Pitch, 0.050 Gauge |
| Maximum Reach | Up to 15 ft (with user's height in consideration) |
| Cutting Capacity | Up to 12 inches (logs), Up to 8 inches (branches) |
| Fuel Mix Ratio | 50:1 (Gasoline:2-Stroke Oil) |
| Fuel Tank Capacity | 0.3 gallons |
| Oil Tank Volume | 0.4 US pint |
| Extension Pole | 3.17 ft |
| Rotary Angle | Up to 90 degrees |
| Engine Features | EPA engine design, Ceramic cylinder, Magnesium crankcase, Full crank |
| Certification | Other (as per product data) |
| Origin | Mainland China |
| UPC | 696177979937 |


User Tips
- Pre-mix Fuel Carefully: Always use a dedicated fuel mixing container and ensure the 50:1 ratio is precise for optimal engine performance and longevity.
- Start with a Sharp Chain: A sharp Oregon chain will make cleaner cuts, reduce strain on the engine, and improve safety.
- Utilize the Harness: The ergonomic harness is designed to distribute weight. Adjust it properly to minimize fatigue during extended use.
- Adjust Cutting Head: Take advantage of the 90-degree rotary angle to achieve precise cuts without awkward body positioning.
- Clear Debris: Regularly clear sawdust and small branches from the cutting head and engine vents to prevent blockages and overheating.
Warranty and Support
For warranty information, technical support, or replacement parts, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.