FSP FSP450-60IHIAA

Contents

FSP 450W Power Supply Unit

Model: FSP450-60IHIAA

Brand: FSP

Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your FSP450-60IHIAA 450W Power Supply Unit (PSU). Please read this manual thoroughly before using the product and retain it for future reference.

1. Setup Instructions

1.1 Pre-Installation Checks

  • Ensure your computer case is compatible with standard ATX PSUs.
  • Verify that your system's power requirements do not exceed the 450W capacity of this PSU.
  • Unplug the power cord from the wall outlet before installing or removing any components.
  • Ensure you are working in a static-free environment or use appropriate anti-static measures.

1.2 Physical Installation

  1. Carefully place the PSU into the designated PSU bay in your computer case.
  2. Align the screw holes on the PSU with those on the case.
  3. Secure the PSU to the case using the provided screws.

1.3 Cable Connections

Connect the following cables to their respective components. This PSU is non-modular, meaning all cables are permanently attached.

FSP450-60IHIAA Power Supply Unit with dimensions and connector types

Figure 1: FSP450-60IHIAA PSU with dimensions and connector types. Dimensions: 165mm (L) x 150mm (W) x 62mm (H). Connectors include 1x 20+4 Pin for motherboard, 1x 4+4 Pin for CPU, 2x 6+2 Pin for graphics cards, 2x SATA, and 1x IDE.

  • 20+4 Pin Main Power Connector: Connect to the motherboard's main power socket.
  • 4+4 Pin CPU Power Connector: Connect to the CPU power socket on the motherboard.
  • 6+2 Pin PCIe Power Connectors (x2): Connect to graphics cards requiring PCIe power.
  • SATA Power Connectors (x2): Connect to SATA devices such as SSDs, HDDs, or optical drives.
  • IDE Power Connector (x1): Connect to older IDE/Molex devices.
FSP450-60IHIAA Power Supply Unit with all cables laid out

Figure 2: Overview of the FSP450-60IHIAA PSU with all non-modular cables displayed.

2. Operating Instructions

2.1 Initial Power-Up

  1. After all components are securely connected, ensure the PSU's power switch (located at the back) is in the OFF position.
  2. Connect the AC power cord to the PSU and then to a grounded wall outlet.
  3. Flip the PSU's power switch to the ON position.
  4. Power on your computer using the case's power button.

2.2 Safety Guidelines

  • DO NOT REMOVE THE COVER: There are no user-serviceable components inside. Dangerous high voltage is present. Refer servicing to qualified service personnel.
  • This product is designed for safe use in areas below 5000m altitude.
  • Avoid operating the PSU in excessively hot, humid, or dusty environments.
  • Do not block the ventilation openings of the PSU.
  • Ensure proper grounding to prevent electrical hazards.
FSP450-60IHIAA Power Supply Unit specification label

Figure 3: Specification label with detailed electrical ratings and safety warnings.

3. Maintenance

3.1 Cleaning

  • Periodically clean the exterior of the PSU and its fan grille to prevent dust buildup.
  • Use a soft, dry cloth or compressed air.
  • Always disconnect the PSU from the power outlet before cleaning.
  • Never use liquid cleaners directly on the PSU.

3.2 Storage

  • If storing the PSU, ensure it is kept in a cool, dry place, away from direct sunlight and extreme temperatures.

4. Troubleshooting

Problem Possible Cause Solution
System does not power on. PSU power switch is OFF.
Power cord not connected.
Loose internal connections.
Faulty PSU.
Ensure PSU switch is ON.
Check power cord connection to PSU and wall outlet.
Verify all internal power cables are securely connected.
Test with a known good PSU if possible.
System powers on but immediately shuts down. Overload or short circuit.
Overheating.
Disconnect non-essential components to check for overload.
Ensure proper ventilation and clean dust from PSU fan.
Unusual noises from PSU. Fan obstruction or defect. Ensure no cables or debris are obstructing the fan. If noise persists, contact support.

If troubleshooting steps do not resolve the issue, please contact qualified service personnel or the vendor for assistance. Do not attempt to open the PSU casing.

5. Specifications

Feature Detail
Model Number FSP450-60IHIAA
Manufacturer's Brand FSP
Total Output Power 450W
AC Input 220V~, 4A, 50Hz
DC Output (+5V & +3.3V) 120W Max
DC Output (+12V1 & +12V2) 408W Max
DC Output (+12V1) 18A
DC Output (+12V2) 18A
DC Output (-12V) 0.3A
DC Output (+5V) 15A
DC Output (+3.3V) 24A
Standby Output (+5Vsb) 2.5A
PFC Type Active
Fans 1
Modular Non-Modular
Interface Type (Mainboard) 20 + 4Pin
CPU Power Connector 8 pin (4+4 Pin)
Graphics Card 12V Pin Number 2 x 6+2 pin
SATA Connectors 2
IDE Connectors 1
Dimensions (L x W x H) 165mm x 150mm x 62mm
Application Desktop, Server
80 PLUS Certification Other Certification
Certifications CE, Dot, EAC, EPA, FCC, GMP, RoHS, TGA, UL, KC, pse, weee
Origin Mainland China

6. User Tips

  • Cable Management: Although non-modular, careful routing of unused cables can improve airflow within your PC case.
  • Power Calculation: Always ensure your total system power draw (especially CPU and GPU) is well within the PSU's rated capacity to ensure stability and longevity.
  • Ventilation: Position your PC case to allow for unrestricted airflow to the PSU's intake and exhaust vents.

7. Warranty and Support

This FSP Power Supply Unit comes with a standard manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please contact your original point of purchase or visit the official FSP website for support resources.

Important: Any attempt to open the PSU casing will void the warranty and poses a significant safety risk due to high internal voltages.

© 2024 FSP Group. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.