Acceo B46P DashCam 4K Mini Car DVR Video Recorder User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Acceo B46P DashCam 4K Mini Car DVR Video Recorder. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Key Features:

• Ultra HD 4K Video Recording: Front camera records in 3840x2160P (4K) resolution.
• Dual Lens Support: Optional 1080P rearview camera for comprehensive coverage.
• Advanced Imaging Sensor: Equipped with Sony IMX678PL for superior low-light performance and clarity.
• High-Performance Processor: Utilizes a Hisilicon Chip for stable and reliable operation.
• Built-in GPS: Records speed, direction, and coordinates for reliable accident evidence.
• Built-in WiFi & APP Control: Seamlessly connect to the "Viidure" app on iOS/Android for live viewing, playback, and file management.
• Night Vision: F1.6 large aperture and exclusive Night Owl Vision for clear recordings in low-light conditions.
• G-Sensor: Automatically locks video footage upon collision to prevent overwriting.
• Loop Recording: Continuously records, overwriting older files when the memory card is full (locked videos are protected).
• Parking Monitor: (Optional, with Hardwire Kit) Detects vibrations and records emergency video when parked.
• Time-Lapse Recording: (Optional, with Hardwire Kit) Extends recording duration for 24-hour surveillance.
• Compact Design: 3-inch IPS screen for a discreet and convenient setup.
• Max External Memory: Supports up to 512GB Micro SD Card (Class 10 recommended).

2. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact customer support.

• 1 x Acceo B46P 4K Dashcam (with built-in GPS)
• 1 x Original Car Charger
• 1 x User Manual
• 1 x USB Card Reader (Gift)
• 1 x Electrostatic Sticker
• Optional Components (depending on purchase):
• 1 x 1080P Night Vision Rearview Camera (with 6 Meters Cable)
• 1 x Hardwire Kit (for 24H Parking Monitoring)

Image: Package contents for the 'Only 4K DVR-B46P' variant.

Image: Package contents for the 'B46P-6M RC' variant, including rearview camera.

Image: Package contents for the 'B46P-6M RC-KIT' variant, including rearview camera and hardwire kit.

3. Product Overview

Familiarize yourself with the dashcam's components and controls.

Image: Product dimensions of the Acceo B46P Dashcam.

Button and Port Functions:

1. Power (OK) Button:
   • Long press (2 seconds) to power on/off.
   • Short press to take a photo (when powered on).
   • Confirmation button in menu settings and playback mode.
2. M (Menu/Mode) Button:
   • Press and hold (2 seconds) to switch between recording, shooting, and playback modes.
   • Short press to enter the main menu function setting table.
3. Up Button:
   • Page up in menu settings and playback mode.
   • Short press in recording interface to switch different window displays.
   • Press and hold (3 seconds) to turn on/off WiFi function.
   • Select up/down during video playback.
4. Down Button:
   • Page down in menu settings and playback mode.
   • Select up/down during video playback.
   • Short press during recording to lock the current video (prevents overwriting).
   • Long press to mute/unmute audio recording.
5. Input Port (TYPE-C): For power connection.
6. Rear Camera Port (AV): For connecting the optional rearview camera.
7. TF Card Slot: For inserting the Micro SD card.
8. Reset Button: Used to reset the device.

Image: Detailed view of dashcam buttons and ports.

4. Setup and Installation

4.1 Initial Setup

1. Insert TF Card: Ensure the dashcam is off. Insert a high-speed Micro SD card (Class 10 or above, minimum 32GB, maximum 256GB) into the TF card slot.
2. Mount the Dashcam: Fix the recorder securely on the car windshield using the provided electrostatic sticker and mount.
3. Adjust Lens: Adjust the lens position to ensure it is level with the ground for optimal recording.

4.2 Power Supply Connection

There are two methods to supply power to the dashcam:

Method 1: Cigarette Lighter Power Supply (Standard)

1. Insert the car charger into the car cigarette lighter port.
2. Connect the charging extension cable from the car charger to the TYPE-C input port of the recorder.
3. Note: The charging cable can be routed along the edge of the car windshield for a neat installation.

Method 2: Hardwire Kit Power Supply (Recommended for 24H Parking Monitoring, Optional Purchase)

If you have purchased the Hardwire Kit, follow these steps for a permanent power connection:

1. Open the car's fuse box.
2. Identify a fuse slot that provides constant power (for the RED wire).
3. Identify a fuse slot that provides power only when the key is in the ACC position (for the YELLOW wire).
4. Connect the BLACK wire to a grounding screw or bolt in the car chassis.
5. Connect the Hardwire Kit to the dashcam's TYPE-C input port.

Warning: Improper installation of the Hardwire Kit can damage your vehicle's electrical system. It is recommended to seek professional assistance for installation.

Image: Hardwire Kit wiring diagram for 24-hour parking monitoring.

4.3 Rear Camera Installation (Optional)

If you have purchased the rearview camera, follow these steps:

1. Install the rear camera at the rear of the vehicle, paying attention to its direction.
2. Route the rear camera cable along the roof of the vehicle.
3. Connect the rear camera's red cable wire to your car's reverse lamp power's positive pole (+).
4. Plug the rear camera's host connector into the AV port of the dashcam.

When you engage reverse gear, the dashcam will automatically switch to the rear camera view with parking lines. If you do not require this function, you can ignore connecting the red wire.

Image: Rear camera wiring and installation reference.

Image: Dashcam installation in a car.

4.4 Power On Test

Start the car engine. The dashcam should automatically power on, the charging indicator light will illuminate, and the recording indicator will flash, indicating it's recording. If the machine starts correctly, the system working indicator light will be on.

5. Operating Instructions

5.1 Automatic Recording

When the car engine starts, the recorder automatically powers on and begins recording. When the car engine is turned off, the recorder automatically saves the recorded content and shuts down. Recorded images are saved in segments on the TF card. When the TF card is full, older recorded images will be overwritten by new ones, unless they are locked.

The recording time period can be set in the menu (1, 2, or 3 minutes).

5.2 Collision Sensing (G-Sensor)

The dashcam has a built-in G-sensor. In the event of a vehicle collision, the G-sensor triggers, and the recorder locks the current video footage, saving it as a special image. A lock icon will appear on the display. Locked images are protected from loop recording overwriting.

The G-sensor sensitivity can be adjusted in the settings menu.

5.3 Date and Time Setting

In standby mode:

1. Short press the [M key] to enter the system setting menu.
2. Use the [Up key] or [Down key] to navigate to the date and time setting option.
3. Short press the [OK key] to enter the time and date setting.
4. Use the Up/Down keys to adjust the values and the Mode key to switch between year, month, day, and time cursors.

Note: For accurate evidence, ensure the correct date and time are set. The time can be automatically synchronized when connected to mobile phone WiFi.

5.4 One-Button Mute Function

During operation, long press the [Down Button]. The microphone icon on the screen will change to a disabled icon, indicating that audio recording is turned off. Long press again to restore audio recording. Settings are saved automatically.

5.5 Playback of Recorded Files

To play back recorded files on the dashcam:

1. Press and hold the [M Key] for 2-3 seconds to switch to playback mode.
2. Use the [Up Key] or [Down Key] to find the desired file.
3. Short press the [OK Key] to play the file.
4. To exit playback mode, short press the [M Key].

5.6 Parking Monitoring Function (Optional)

This function requires the ACC three-core Hardwire Kit (optional purchase) to be connected to the ACC power supply.

1. Connect the recorder to the ACC power supply.
2. In the menu interface, navigate to and select the "Parking Monitoring" function.
3. Choose a sensitivity level: Off, Low, Medium, or High.

When the car is turned off and parked, if it detects a slight vibration, the recorder will automatically start emergency recording to capture important evidence. Ensure the gravity sensing function is also enabled.

5.7 Time-Lapse Recording Function (Optional)

This function also requires the ACC three-core Hardwire Kit (optional purchase) to be connected and the ACC function to be turned on.

1. In the menu, navigate to "Time-lapse Recording Duration" and select a duration: 12 hours, 24 hours, 48 hours, or 72 hours.
2. Select the "Time-lapse Frame Rate": 1 FPS, 2 FPS, or 5 FPS.
   • 1 FPS: 30 minutes of video recorded in 1 minute.
   • 2 FPS: 15 minutes of video recorded in 1 minute.
   • 5 FPS: 6 minutes of video recorded in 1 minute.

When enabled and the car is off/ACC disconnected, the dashcam enters time-lapse recording (indicated by a flashing red light). It exits time-lapse mode and returns to normal recording when the car is started.

Image: Time-Lapse Video Function comparison.

5.8 GPS Function

The dashcam has a built-in GPS. Upon successful GPS positioning, a green GPS icon will appear on the video interface. You can view satellite information (longitude and latitude) in the menu under "Satellite information".

Note: GPS positioning requires an open environment. Weak signal areas may cause temporary loss of signal.

6. APP Connection and Operation (Viidure App)

The Acceo B46P DashCam can be controlled and managed via the "Viidure" app on both Android and iPhone devices.

6.1 APP Download and Installation

Scan the QR code below or search for "Viidure" in your device's app store (Google Play Store for Android, Apple App Store for iPhone) to download and install the application.

Image: QR code for Viidure App download.

6.2 Connecting to Dashcam WiFi

1. Power on the dashcam.
2. On your mobile phone, go to WiFi settings.
3. Look for a WiFi network named "B46P-********" (e.g., H30D-88D7B5D9).
4. Connect to this network. The default password is 12345678.
5. Android Users: If prompted that "This WLAN network has no Internet access," select "Connect anyway" to proceed. Failing to do so may prevent app access.
6. iPhone Users: Ensure all necessary app permissions are granted. If issues persist, try uninstalling and reinstalling the app.

6.3 Using the Viidure App

Once connected via WiFi, open the "Viidure" app:

1. Tap the "Access Camera" icon to view the live feed from the dashcam.
2. You can view, play back, and manage recorded videos and photos directly from the app.
3. Download recorded 4K videos directly to your phone.
4. Share your travel scenery and highlight moments to social media.
5. Access settings to adjust dashcam parameters (note: factory settings are optimized).

Image: Built-in WiFi and GPS with App Control interface.

6.4 Saving Videos to Mobile Phone

To save recorded videos from the dashcam to your mobile phone:

1. In the Viidure app, navigate to the "Replay" section.
2. Select the video you wish to save.
3. Tap the "Download" button.
4. Android: Videos will be automatically saved to your phone's photo album.
5. iOS: Videos are saved within the app first; you may need to manually save them to your phone's photo album from within the app.

7. Troubleshooting

If you encounter any issues with your Acceo B46P DashCam, refer to the following common problems and solutions:

Q: After connecting to the recorder's WiFi, black screen or flash back happens after accessing the APP, or can not access the APP?

A:

1. Android Devices: If your phone alerts "This WLAN network has no Internet access," ensure you select "Connect anyway." If you ignored it, go to your phone's WiFi settings, "forget" the dashcam's WiFi network, and then reconnect, choosing "Connect anyway" when prompted.
2. App Permissions: If the problem persists, it might be due to restricted app permissions. Uninstall and reinstall the "Viidure" app, ensuring all requested permissions are granted during installation.

Q: The recorder does not read the memory card, or the video sometimes records, sometimes not?

A:

This often indicates an issue with the memory card. Ultra HD recorders require high-speed and stable memory cards. Ensure you are using a genuine Class 10 Micro SD card from a reputable brand (e.g., SanDisk, Toshiba, Kingston). Low-quality or slow cards can cause recording failures. Replacing the card with a suitable one should resolve the issue.

Q: Recorder flash screen or abnormal switch machine?

A:

Check the power connection to ensure the power connector is properly plugged in. Also, verify that the power supply (car charger or hardwire kit) provides sufficient voltage and current. Ultra HD recorders typically require a 5V/3A power input. Unstable voltage or insufficient current can lead to display issues or unexpected shutdowns.

8. Specifications

9. User Tips

• For optimal performance, especially with 4K recording, always use a high-quality Class 10 TF card from reputable brands like SanDisk, Toshiba, or Kingston. Lower quality cards may cause recording issues.
• If using the 24-hour parking monitor or time-lapse recording, ensure you have the optional ACC three-core Hardwire kit installed, as the built-in battery is primarily for saving settings and not for extended operation.
• When connecting the dashcam to your phone via WiFi, especially on Android, make sure to select 'Connect anyway' if prompted about no internet access to ensure the app functions correctly.
• For accurate date and time stamping on recordings, ensure the dashcam's time is synchronized, ideally via WiFi connection to your mobile phone.

10. Warranty and Support

Warranty Information:

This product comes with a 365-day warranty from the date of purchase.

Customer Support:

For technical assistance, troubleshooting, or warranty claims, please contact Acceo customer support:

• Website: www.yantop.net
• Email: support@yantop.net; firekingitl@yeah.net
• Phone: +86 0755-8464 4084
• WhatsApp: +86-18231199788
• Address: Floor 2nd, No.1 Yuanxia street, Pingshan District, Shenzhen City, Guangdong Province, 518000, China

Image: Acceo's commitment to Professionalism, Quality, and Service.

Image: Acceo company overview.

Image: Acceo product certifications and honors.