keeppley Pokémon Cones Series Building Blocks

Contents

Keeppley Pokémon Cones Series Building Blocks Instruction Manual

Models: Pikachu (K20254), Charmander (K20255), Squirtle (K20256), Bulbasaur (K20257), Jigglypuff (K20258), Eevee (K20259)

Introduction

This manual provides instructions for the assembly, care, and maintenance of your Keeppley Pokémon Cones Series Building Blocks. These micro building block sets allow you to construct detailed models of popular Pokémon characters in a sweet cone design, suitable for display or play.

All six Keeppley Pokémon Sweet Cone models assembled
Figure 1: Overview of the Keeppley Pokémon Cones Series Building Blocks.

Safety Information

  • WARNING: DO NOT SWALLOW. This product contains small parts and is not suitable for children under 3 years old due to choking hazards.
  • Recommended for ages 6 years and above. Adult supervision is advised for younger children.
  • Keep building blocks away from extreme heat sources to prevent deformation.

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Setup and Assembly

Your Keeppley Pokémon Cones Series Building Blocks require assembly. Follow the included visual instructions carefully for the best building experience.

  1. Unpack Components: Carefully open the packaging and remove all building block pieces. If your set was purchased without an original box, the pieces will be securely packaged in a bubble bag or carton box.
  2. Organize Pieces: Before starting, sort the pieces by color, shape, or size to make assembly easier. This is especially helpful for micro building blocks.
  3. Follow Instructions: Refer to the detailed visual instruction manual provided with your specific Pokémon model. Each step will guide you through connecting the self-locking bricks.
  4. Secure Connections: Ensure each brick is firmly connected to the next. The self-locking design provides a secure fit.
  5. Verify Completion: Once all steps are followed, double-check your model against the final image in the instructions to ensure all parts are correctly placed.
Hands assembling micro building blocks
Figure 2: Example of micro building block assembly.

Operating and Display

Once assembled, your Pokémon Sweet Cone model is ready for display or imaginative play.

  • Display: Place your finished model on a stable, flat surface as an ornament. The detailed design makes it an attractive collectible.
  • Play: These building blocks are designed to enhance fine motor skills, spatial awareness, and storytelling. Engage in creative play, but handle with care to prevent accidental disassembly.
Assembled Pikachu Sweet Cone model on a yellow plate
Figure 3: Pikachu Sweet Cone model ready for display.

Maintenance and Care

  • Cleaning: To clean your building blocks, gently wipe them with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
  • Storage: Store disassembled or assembled blocks in a cool, dry place away from direct sunlight to prevent material degradation or color fading.
  • Handling: While durable, excessive force can cause pieces to break or detach. Handle your models with care.

Troubleshooting

  • Missing Parts: If you discover any missing parts after receiving your package, please contact the seller immediately for assistance.
  • Difficulty Connecting Blocks: Ensure the blocks are aligned correctly before applying gentle, even pressure. Micro blocks require precision.
  • Loose Connections: If a connection feels loose, try re-attaching the pieces with firm, even pressure. Sometimes, a slight adjustment in angle can help.

Specifications

AttributeDetail
Brand Namekeeppley
MaterialHigh-quality ABS Plastic
Block TypeMicro building block, Self-Locking Bricks
Is ElectricNo Battery
Recommended Age6-12Y, 14+, 18+ (Applicable age: 6 years old and above)
GenderUnisex
CertificationCE
OriginMainland China

Model Dimensions (Approximate)

Dimensions are provided for both the product packaging (if applicable) and the assembled model. Note that measurements are manual and may have slight inaccuracies.

ModelProduct CodeBox Dimensions (L x W x H)Assembled Model Dimensions (H x W x D)
Pikachu Sweet ConeK2025418cm x 18cm x 6cm11cm x 9cm x 7.5cm
Charmander Sweet ConeK2025518cm x 18cm x 6cm13cm x 10cm x 9cm
Squirtle Sweet ConeK2025618cm x 18cm x 6cm11.5cm x 9cm x 8cm
Bulbasaur Sweet ConeK2025718cm x 18cm x 6cm11cm x 8cm x 9cm
Jigglypuff Sweet ConeK2025818cm x 18cm x 6cm12.5cm x 10.5cm x 9cm
Eevee Sweet ConeK2025918cm x 18cm x 6cm11cm x 11cm x 8cm
Diagram showing box and assembled dimensions for Pikachu and Charmander models
Figure 4: Dimensions for Pikachu (K20254) and Charmander (K20255) models.
Diagram showing box and assembled dimensions for Bulbasaur, Jigglypuff, and Eevee models
Figure 5: Dimensions for Bulbasaur (K20257), Jigglypuff (K20258), and Eevee (K20259) models.

User Tips

  • Patience is Key: Micro building blocks can be intricate. Take your time with each step to ensure correct placement and a satisfying build.
  • Work on a Clean Surface: A well-lit, clean, and flat surface will prevent small pieces from getting lost or mixed up.
  • Double-Check Steps: If you encounter difficulty, re-examine the previous steps in the instruction manual.

Warranty and Support

For any issues regarding missing parts, product defects, or general inquiries, please contact the seller directly through your purchase platform. Provide your order details and a clear description of the issue for prompt assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.