Hyper Tough 80017

Contents

Hyper Tough 20V Brushless Cordless Drill Driver & Impact Wrench Set

Model: 80017 - Instruction Manual

1. Introduction

Thank you for choosing the Hyper Tough 20V Brushless Cordless Drill Driver & Impact Wrench Set. This versatile tool kit is designed for a wide range of household and DIY tasks, offering powerful performance and cordless convenience. The brushless motors provide extended tool life, increased efficiency, and more power. Please read this manual thoroughly before operating the tools to ensure safe and effective use.

2. Safety Information

General Power Tool Safety

  • Always wear appropriate personal protective equipment (PPE) such as safety glasses, hearing protection, and gloves.
  • Keep your work area clean and well-lit. Cluttered or dark areas invite accidents.
  • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
  • Avoid accidental starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool.
  • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

Battery and Charger Safety

  • Use only the charger specified by the manufacturer for recharging. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
  • Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
  • When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
  • Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
  • Do not expose battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C (265°F) may cause explosion.

3. Package Contents

Your Hyper Tough 20V Brushless Cordless Drill Driver & Impact Wrench Set includes the following items:

  • 1 x 20V Brushless Cordless Drill Driver
  • 1 x 20V Brushless Cordless Impact Wrench
  • 1 x 1.5Ah Lithium-Ion Battery (for Drill Driver)
  • 1 x 2.0Ah Lithium-Ion Battery (for Impact Wrench)
  • 2 x Battery Chargers
  • 1 x Belt Clip (may be pre-attached or included separately)
  • 1 x Double-ended Screwdriver Bit
Hyper Tough 20V Brushless Cordless Drill Driver and Impact Wrench Set with accessories
Figure 1: Complete set of Hyper Tough 20V Brushless Cordless Drill Driver and Impact Wrench with included accessories.

4. Specifications

FeatureSpecification
Voltage20V Max
Drill Driver Chuck Size3/8 inch Keyless
Drill Driver Max Torque250 in-lb
Impact Wrench Drive Size1/2 inch Square
Impact Wrench Max Torque350 ft-lbs
Motor TypeBrushless
Drill Driver Battery Capacity1.5 Ah Lithium-Ion
Impact Wrench Battery Capacity2.0 Ah Lithium-Ion
Model Number80017
DIY Supplies CategoryElectrical
ApplicationHousehold Tool Set
CertificationCE
Approx. Individual Tool Weight2.54 lb

5. Setup

5.1 Charging the Battery

  1. Connect the charger to a standard power outlet. The charger indicator light will illuminate.
  2. Slide the battery pack onto the charger base, ensuring it clicks into place.
  3. The charger indicator light will change to indicate charging status (e.g., red for charging, green for fully charged).
  4. Once fully charged, remove the battery pack from the charger.
  5. Disconnect the charger from the power outlet when not in use.

Note: New battery packs are shipped in a low charge condition to prevent power loss during shipping. It is recommended to fully charge the battery before first use.

5.2 Installing and Removing the Battery Pack

  1. To install: Align the battery pack with the base of the tool handle. Slide the battery pack into the tool until it locks securely into place.
  2. To remove: Press the battery release button (usually located on the side or front of the battery pack) and slide the battery pack out of the tool.

5.3 Drill Driver: Installing and Removing Drill Bits/Accessories

Hyper Tough 20V Brushless Cordless Drill Driver with battery and charger
Figure 2: Hyper Tough 20V Brushless Cordless Drill Driver.
  1. Ensure the tool is off and the battery pack is removed for safety.
  2. Grasp the rear collar of the keyless chuck with one hand and rotate the front collar counter-clockwise until the chuck jaws are open wide enough to accept the bit.
  3. Insert the drill bit or accessory into the chuck as far as it will go.
  4. Rotate the front collar clockwise to tighten the chuck jaws firmly around the bit. Hand-tighten only; do not use a wrench.
  5. To remove: Rotate the front collar counter-clockwise to loosen the jaws and pull the bit out.

5.4 Impact Wrench: Installing and Removing Sockets

Hyper Tough 20V Brushless Cordless Impact Wrench with battery and charger
Figure 3: Hyper Tough 20V Brushless Cordless Impact Wrench.
  1. Ensure the tool is off and the battery pack is removed for safety.
  2. Push the desired socket onto the square drive anvil until it snaps securely into place.
  3. To remove: Firmly pull the socket off the anvil.

6. Operating Instructions

6.1 Drill Driver Operation

  1. Forward/Reverse Selector: Push the selector switch to the left for forward rotation (drilling/driving screws in) or to the right for reverse rotation (removing screws). Position it in the center to lock the trigger.
  2. Variable Speed Trigger: Squeeze the trigger to start the tool. The speed increases as you apply more pressure to the trigger. Release the trigger to stop.
  3. Torque Collar: Rotate the torque collar to select the desired clutch setting. Lower numbers are for driving small screws or working with soft materials, preventing overtightening. Higher numbers and the drill symbol are for drilling or driving large screws where maximum torque is required.
  4. LED Work Light: The integrated LED light illuminates the work area when the trigger is pressed.

6.2 Impact Wrench Operation

  1. Forward/Reverse Selector: Similar to the drill driver, push the selector switch to the left for forward rotation (tightening) or to the right for reverse rotation (loosening). Center position locks the trigger.
  2. Variable Speed Trigger: Squeeze the trigger to start the tool. The speed and impact rate increase with trigger pressure. Release to stop.
  3. Impact Mechanism: The impact wrench delivers rotational impacts to provide high torque for fastening and loosening stubborn nuts and bolts.
  4. LED Work Light: The integrated LED light illuminates the work area when the trigger is pressed.

7. Maintenance

Cleaning

  • Keep the tool's air vents clear to prevent overheating.
  • Use a soft, damp cloth to clean the exterior of the tool. Do not use harsh chemicals or abrasive cleaners.
  • Never immerse the tool or battery in water or any other liquid.

Battery Care and Storage

  • Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
  • For long-term storage, charge batteries to approximately 50% capacity.
  • Do not store batteries in a discharged state.
  • Periodically charge batteries during long storage periods to maintain their health.

General Storage

  • Store tools and accessories in a secure, dry place, out of reach of children.
  • Ensure tools are clean and free of debris before storing.

8. Troubleshooting

Tool Does Not Start

  • Check if the battery pack is fully charged and properly installed.
  • Ensure the forward/reverse selector switch is not in the center (locked) position.
  • Inspect the trigger for any obstructions.

Battery Not Charging

  • Verify the charger is properly plugged into a working power outlet.
  • Ensure the battery pack is correctly seated on the charger.
  • Check for any damage to the battery pack or charger.
  • Confirm the ambient temperature is within the recommended charging range (typically 0°C to 40°C / 32°F to 104°F).

Loss of Power/Reduced Performance

  • The battery pack may be low on charge. Recharge it fully.
  • The tool may be overloaded. Reduce the load or use a more appropriate tool for the task.
  • Ensure the correct accessory (drill bit/socket) is being used for the application.

9. User Tips

  • Pre-Drill Pilot Holes: For driving screws into dense materials, pre-drilling a pilot hole can prevent wood splitting and make driving easier.
  • Use the Right Bit/Socket: Always match the drill bit or socket size to the fastener or application to prevent damage to the fastener head or the tool.
  • Start Slow: When drilling or driving, start at a slower speed to gain control, then gradually increase as needed.
  • Battery Rotation: If you have multiple batteries, rotate their use to ensure even wear and extend overall battery life.
  • Clean Fasteners: Ensure nuts and bolts are free of rust or debris before using the impact wrench to prevent stripping or damage.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.