HOTA HOTA T8

Contents

HOTA T8 Smart Balance Charger User Manual

Model: HOTA T8

1. Introduction

The HOTA T8 Smart Balance Charger is a high-performance, intelligent charging and checking device designed for various battery types, including LiHv, LiPo, LiFe, Lilon, Lixx, LTO, NiZn, NiCd, NiMH, PB, and Eneloop. With a maximum charging power of 650W and a current of 22A, it offers efficient and safe battery management for hobbyists and professionals alike. Its compact design and intuitive interface make it a versatile tool for FPV drones and other remote-controlled vehicles.

2. Safety Instructions

Please read all safety instructions carefully before using the charger to prevent injury or damage to the device and batteries.

  • Always use the charger in a well-ventilated area, away from flammable materials.
  • Never leave the charger unattended while in use.
  • Ensure the input voltage matches the charger's requirements (DC 7.0-35.0V).
  • Do not attempt to charge damaged or swollen batteries.
  • Keep the charger away from moisture, heat, and direct sunlight.
  • Always connect the battery correctly, observing polarity.
  • Disconnect the battery and power supply after charging.
  • This charger incorporates multiple protection features for safe operation:
HOTA T8 Charger Multiple Protection Features

Image: HOTA T8 Charger Multiple Protection Features. Icons indicate Short circuit protection, Overheating protection, Capacity protection, Time protection, Low voltage protection, Overvoltage protection, Overcurrent protection, and VO standard flame retardant material.

3. Package Contents

Please check the package contents upon unboxing:

  • 1 x HOTA T8 650W 22A XT60 1-8S Intelligent Charger Checker
  • 1 x User Manual

Note: Power supply, input cables, and battery connection cables are typically not included and must be purchased separately.

4. Product Overview

Familiarize yourself with the various ports and controls of your HOTA T8 charger:

HOTA T8 Charger Port Diagram

Image: HOTA T8 Charger Port Diagram. Labels include: Speed Shuttle Key / Exit Key / Multi-Function Key, Output Port (XT60), Balance Port, Multi-Function Port, USB Port 5V/Update Port, DC In Port, and Fan.

  • Speed Shuttle Key / Exit Key / Multi-Function Key: Used for navigation, selecting options, and exiting menus.
  • Output Port (XT60): Main battery connection for charging/discharging.
  • Balance Port: Connects battery balance leads for cell voltage monitoring and balancing. Supports up to 8S lithium batteries.
  • Multi-Function Port: Can be used to test RF airplane control servos.
  • USB Port 5V/Update Port: Provides 5V @ 2.1A output for charging external devices and for firmware updates.
  • DC In Port: Connects to your external DC power supply.
  • Fan: Integrated intelligent temperature control fan for cooling during operation.

5. Setup

  1. Power Connection: Connect a suitable DC power supply (7.0V to 35.0V, minimum 27A for full 650W output) to the DC In Port on the charger. Ensure the power supply is capable of providing the necessary current.
  2. Battery Connection:
    • Connect your battery's main power lead (e.g., XT60) to the Output Port on the charger.
    • For lithium batteries, connect the battery's balance lead to the Balance Port. Ensure the correct orientation and pin count (e.g., 2S, 3S, up to 8S).
  3. Initial Power On: Once connected, the charger will power on and display the main interface.

6. Operating Instructions

The HOTA T8 features a simple and efficient interface for easy operation.

HOTA T8 Simple Interface

Image: HOTA T8 Simple Interface. The screen shows status indication at a glance, including charging progress, cell voltages, current, and power.

6.1. Navigation

Use the Speed Shuttle Key / Multi-Function Key to scroll through menus and adjust values. Press the key to confirm selections. Use the Exit Key to go back to the previous menu or stop an operation.

6.2. Charging Batteries

  1. From the main screen, navigate to the desired charging mode (e.g., LiPo Charge, LiPo Balance, Storage).
  2. Select the battery type and cell count (e.g., LiPo 4S).
  3. Set the charging current (e.g., 5.0A). Ensure the current does not exceed the battery's safe charging rate (usually 1C for LiPo).
  4. Confirm the settings and start the charging process. The screen will display real-time charging status, including total voltage, individual cell voltages, current, and charged capacity.
  5. The charger will automatically stop when the battery is fully charged or reaches the set parameters.

6.3. Discharging Batteries

The charger supports various discharge modes:

  • Recycle External: 0.1-22A@650W
  • Normal Mode: 0.1-3A@20W

Select the discharge mode, set the discharge current and voltage cut-off, then start the process.

6.4. Measuring Functions

The Multi-Function Port and internal sensors allow for various measurements:

  • PWM: 880us-2200us@20-400Hz
  • PPM: 880us-2200us*8CH@20-50Hz
  • SBUS: 880us-2200us*16CH@20-100Hz
  • Voltage: 1.0V-5.0V@1-8S
  • Internal Resistance: 1-99mR@1-8S
  • ESC: 1-20A@1-35V MAX650W

6.5. Power Supply Output

The charger can act as a DC power supply:

  • Output: 0.5-22A@1-35V mode: CC+CV

This feature is useful for powering other DC devices.

6.6. USB-A Output

The USB-A port provides 5V @ 2.1A, allowing you to charge mobile devices or power USB-compatible accessories.

Video: HOTA T8 Smart Balance Charger Product Showcase. This video demonstrates the physical appearance and various angles of the charger.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the charger. Do not use solvents or abrasive cleaners.
  • Storage: Store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Storage temperature: -20~60℃.
  • Firmware Updates: Periodically check the official HOTA website for firmware updates. Updates can typically be performed via the USB port.

8. Troubleshooting

  • Charger Not Powering On: Ensure the DC input voltage is within the 7.0-35.0V range and the power supply is correctly connected and functional.
  • Battery Not Charging: Check battery connections (main and balance leads), ensure correct battery type and cell count are selected, and verify the battery is not damaged.
  • Error Messages: Refer to the on-screen error message for specific issues. Common errors relate to input voltage, battery connection, or internal faults. Disconnect and reconnect everything, then try again. If the issue persists, contact support.
  • Overheating: The charger has an intelligent fan. Ensure the fan vents are not obstructed and the charger is in a well-ventilated area.

9. Specifications

HOTA T8 Charger Detailed Specifications

Image: HOTA T8 Charger Detailed Specifications Table.

FeatureSpecification
Input VoltageDC 7.0~35.0V@MAX 27A
Power Charge0.1-22A@650W
Discharge Power0.1-22A@650W Recycle External
0.1-3A@20W Normal mode
Balance Current1000mA@4.2V
Storage Temperature-20~60℃
Operating Temperature0~40℃
Screen Size2.8" IPS 320×240 260000 colors
USB-A Output5V @ 2.1A Upgrade
Battery TypeSmart Battery/LiHv/LiPo/LiFe/Lilon/Lixx/LTO : 1~8S
NiZn/NiCd/NiMH: 1~20S
PB: 1~12S
Eneloop : 1~20S
Measurer (PWM)880us-2200us@20-400Hz
Measurer (PPM)880us-2200us*8CH@20-50Hz
Measurer (SBUS)880us-2200us*16CH@20-100Hz
Measurer (Voltage)1.0V-5.0V@1-8S
Measurer (Internal resistance)1-99mR@1-8S
Measurer (ESC)1-20A@1-35V MAX650W
Output (PWM)500us-2500us@20-1000Hz
Output (PPM)880us-2200us*8CH@50Hz
Output (SBUS)880us-2200us*16CH@74Hz
Output (Power supply)0.5-22A@1-35V mode: CC+CV
Dimensions97mm×69.5mm×34mm
Net Weight194g approximate

10. User Tips

  • Essential Accessories: Be aware that the HOTA T8 charger typically does not include a DC power supply or battery connection cables. You will need to acquire a suitable DC power supply (7.0-35.0V, capable of providing sufficient current for your charging needs) and appropriate XT60 and balance connectors for your batteries.
  • Capacity Test: Some users note the absence of a dedicated battery capacity test option. While the charger displays charged capacity, a full discharge-recharge cycle might be needed for precise capacity determination.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or the official HOTA support channels. Keep your purchase receipt as proof of purchase.

© 2023 HOTA. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.