Introduction
Thank you for choosing the Bonsaii C261-C 8-Sheet Cross Cut Paper Shredder. This manual provides important information regarding the safe operation, maintenance, and troubleshooting of your shredder. Please read it thoroughly before use and keep it for future reference.

Important Safety Instructions
To ensure safe operation, please observe the following precautions:
- Keep children and pets away from the shredder.
- Keep loose clothing, jewelry, hair, and hands away from the paper entry slot.
- Do not spray any flammable liquids or gases into the shredder.
- Do not shred metal objects, wet paper, or adhesive labels.
- Always unplug the shredder before moving, cleaning, or emptying the wastebasket.
- Do not operate the shredder if the power cord is damaged.
- The shredder head will pause shredding when lifted from the wastebasket for safety.

Setup
- Carefully remove the shredder from its packaging.
- Place the shredder head securely on top of the provided 4.1-gallon (16-liter) wastebasket. Ensure it is properly seated.
- Position the shredder on a flat, stable surface.
- Plug the power cord into a standard electrical outlet.

Operating Instructions
The Bonsaii C261-C features four control modes:

- AUTO (Automatic): This is the standard operating mode. The shredder will automatically start when paper is inserted and stop when shredding is complete.
- OFF: Turns the shredder off.
- FWD (Forward): Manually forces the shredder to run forward. Useful for clearing minor jams or continuous shredding.
- REV (Reverse): Manually forces the shredder to run in reverse. Essential for clearing paper jams.
Shredding Documents
- Set the control switch to "AUTO".
- Insert up to 8 sheets of A4 paper into the paper entry slot. The shredder will automatically start.
- For credit cards, insert one card at a time into the designated slot.
- The shredder can also handle staples and small paper clips.
- The shredder has a continuous runtime of 4 minutes. After this, it requires a 40-minute cool-down period to prevent overheating.

Overheat Protection
The shredder is equipped with overheat protection. If the shredder runs continuously for too long or is overloaded, it will automatically shut off to prevent damage. The indicator light will turn red.
- When the light is green, the paper shredder is working normally.
- When the light is red, the paper shredder is overheated. Please allow it to cool down for 40 minutes before resuming operation.

Maintenance
- Emptying the Wastebasket: The wastebasket has a transparent window, allowing you to easily monitor the shredded paper level. Empty the wastebasket regularly to prevent jams and ensure optimal performance. Always unplug the shredder before emptying.
- Cleaning: Wipe the exterior of the shredder with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Oiling (Optional): For prolonged life and smoother operation, occasionally oil the shredder blades with shredder oil. Follow the instructions provided with the shredder oil.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shredder does not turn on. | Not plugged in; power switch in OFF position; shredder head not properly seated; overheat protection activated. | Ensure power cord is securely plugged in. Set switch to AUTO. Re-seat the shredder head. Allow 40 minutes for cool-down if overheated. |
| Paper jam. | Too many sheets inserted; paper folded or crumpled; foreign object. |
![]() |
| Shredder stops during operation. | Overheat protection activated; wastebasket full; shredder head lifted. | Allow 40 minutes for cool-down. Empty the wastebasket. Ensure the shredder head is properly seated. |
| Shredder is noisy or slow. | Blades need oiling; wastebasket too full. | Oil the shredder blades. Empty the wastebasket. |
Specifications
| Feature | Detail |
|---|---|
| Model | C261-C |
| Shredder Type | Cross-Cut |
| Shred Size | 13/64 x 45/64 inches (5 x 18 mm) |
| Security Level | P-4 |
| Shredding Capacity | 8 sheets (A4 paper, 70g/m²) per pass |
| Shredding Medium | Paper, Credit Cards (one at a time), Staples, Paper Clips |
| Continuous Run Time | 4 minutes |
| Cool-down Time | 40 minutes |
| Wastebasket Capacity | 4.1 Gallons (16 Liters) |
| Control Modes | FWD, AUTO, OFF, REV |
| Safety Features | Overheat Protection, Overload Protection, Safety Interlock (pauses when head lifted) |
| Dimensions (Approx.) | 12.2 inches (31cm) W x 7.34 inches (18.6cm) D x 14.88 inches (37.8cm) H |
| Power | Electricity |

User Tips
- For optimal performance and to prevent jams, avoid continuously feeding the maximum sheet capacity. It's often better to feed slightly less than the maximum.
- Regularly check the transparent window of the wastebasket and empty it before it gets too full. Overfilling can lead to jams or reduced performance.
- If shredding sensitive documents, consider shredding them in batches with breaks in between to allow the motor to cool, even if the overheat protection hasn't activated.
- Always ensure the shredder is unplugged when not in use or when performing any maintenance.
Warranty and Support
For any questions, technical support, or warranty inquiries regarding your Bonsaii C261-C paper shredder, please contact Bonsaii Customer Service.
Customer Service Email: customer-care@bonsaii.com
Please have your model number (C261-C) and purchase information ready when contacting support.
