1. Introduction
Thank you for choosing the BRPOM 6000A Peak 12V 26800mAh Portable Car Jump Starter. This device is designed to provide a powerful and reliable solution for starting vehicles with dead batteries, as well as serving as a portable power bank and an emergency LED light. Please read this manual carefully before use to ensure safe and optimal performance.
2. Key Features
- Powerful Jump Starting: 6000A peak current for 12V vehicles, suitable for all gasoline engines and up to 8.0L diesel engines.
- High Capacity Battery: 26800mAh internal battery capacity.
- Multi-functional Power Bank: Equipped with dual USB/QC 3.0 output for charging various electronic devices like phones, tablets, cameras, and more.
- Emergency LED Light: Features illumination, strobe, and SOS signal modes.
- Extreme Temperature Operation: Designed to function reliably in temperatures ranging from -20°C to +80°C.
- Smart Cable Protection: Built-in safety features to prevent reverse polarity, over-current, short-circuit, over-charge, and over-temperature.
- Large LCD Screen: Displays battery status and output information.
3. Package Contents
Please check the package for the following items:
- BRPOM Car Jump Starter Unit
- Smart Jumper Cables (with battery clamps)
- USB-C Charging Cable
- User Manual
4. Product Overview
Familiarize yourself with the different parts of your BRPOM Jump Starter:
- LED Light: Integrated flashlight for illumination.
- Large LCD Screen: Digital display for battery percentage (IN/OUT) and charging status.
- 12V Starter Plug: Port for connecting the smart jumper cables.
- Type C Input: Used for charging the jump starter unit.
- USB QC3.0 Output: USB port for charging external devices.
- Power Button: To turn the unit on/off and cycle through LED light modes.
5. Specifications
| Feature | Specification |
|---|---|
| Brand Name | BRPOM |
| Peak Current | 6000A |
| Battery Capacity | 26800mAh |
| Conversion Rate | >90% |
| Number of Built-in Batteries | 2 |
| External Testing Certification | ROHS, FCC, CE, UL |
| Operating Temperature | -20°C to +80°C |
| USB Output | QC 3.0, 5.0V 2.4A |
| Dimensions (Approx.) | 19.2cm (H) x 8.9cm (W) x 4cm (D) / 7.5in (H) x 3.5in (W) x 1.5in (D) |
6. Setup and Initial Charge
Before using your BRPOM Jump Starter for the first time, ensure it is fully charged.
- Check Battery Level: Press the power button to check the battery level on the LCD screen. If it's below 100%, proceed to charge.
- Charge the Unit: Connect the provided USB-C charging cable to the Type C input port on the jump starter and plug the other end into a USB wall adapter (not included) or a car charger.
- Charging Indicator: The LCD screen will show 'IN' and the battery percentage increasing during charging.
- Full Charge: The unit is fully charged when the LCD screen displays 100%. Disconnect the charging cable.
Important: For optimal performance and battery longevity, fully charge the unit every 3-6 months, even if not in use.
7. Operating Instructions: Jump Starting a Vehicle
Safety First: Always ensure proper connection to avoid damage to the jump starter or your vehicle. Do not touch the red and black clamps together.
- Prepare the Vehicle: Turn off the vehicle's ignition and all accessories (lights, radio, A/C). Engage the parking brake.
- Connect Smart Jumper Cables: Insert the blue plug of the smart jumper cables firmly into the 12V Starter Plug on the jump starter unit. Ensure a secure connection.
- Connect to Car Battery:
- Connect the RED (+) clamp to the vehicle's positive battery terminal.
- Connect the BLACK (-) clamp to the vehicle's negative battery terminal or a solid, unpainted metal part of the engine block (ground).
- Check Indicator Light: The indicator light on the smart cable will show its status. Refer to the smart cable's manual for specific light patterns (e.g., solid green for ready, flashing red for error).
- Start the Vehicle: Once the smart cable indicates it's safe to start (e.g., solid green light), turn on your vehicle's ignition. If the vehicle doesn't start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.
- Disconnect Cables: Once the vehicle starts, immediately disconnect the BLACK (-) clamp first, then the RED (+) clamp from the car battery. Finally, disconnect the smart jumper cable from the jump starter unit.
Note: If the vehicle does not start after 3 attempts, there may be another issue with the vehicle. Consult a mechanic.
8. Charging the Jump Starter
To recharge your BRPOM Jump Starter:
- Connect the USB-C charging cable to the 'Type C Input' port on the jump starter.
- Plug the other end of the USB-C cable into a suitable USB power source (e.g., a 5V/2A or higher wall adapter, car charger, or power bank).
- The LCD screen will display 'IN' and the current battery percentage, indicating that charging is in progress.
- The unit is fully charged when the screen shows 100%.
9. Using as a Power Bank
The BRPOM Jump Starter can also charge your electronic devices:
- Connect your device's USB charging cable to the 'USB QC3.0 Output' port on the jump starter.
- The jump starter will automatically begin charging your device. The LCD screen will show 'OUT' and the remaining battery percentage.
- Disconnect your device once it's fully charged.
10. Using the LED Light
The integrated LED light has multiple modes for different situations:
- Turn On/Off: Press and hold the power button for a few seconds to turn the LED light on or off.
- Cycle Modes: Once the light is on, short press the power button to cycle through the modes: Illumination (steady light) > Strobe > SOS Signal.
11. Maintenance and Storage
- Cleaning: Wipe the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Storage: Store the jump starter in a cool, dry place away from direct sunlight, heat sources, and moisture.
- Battery Care: To maintain battery health, recharge the unit every 3-6 months, even if it hasn't been used.
- Avoid Extreme Conditions: While designed for extreme temperatures, prolonged exposure to very high or low temperatures can affect battery life.
12. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Jump starter won't turn on. | Battery is completely drained. | Charge the jump starter for at least 30 minutes before attempting to turn it on. |
| Vehicle won't start. | Incorrect cable connection. | Ensure clamps are connected correctly (Red to +, Black to - or ground). Check smart cable indicator. |
| Vehicle won't start. | Jump starter battery is low. | Recharge the jump starter to at least 50% before attempting to jump start. |
| Vehicle won't start. | Vehicle battery is severely damaged or other vehicle issues. | Consult a professional mechanic. |
| Smart cable indicator shows error. | Reverse polarity, short circuit, or other safety trigger. | Disconnect clamps, check connections, and reconnect carefully. Refer to smart cable manual for specific error codes. |
| Devices not charging from USB output. | Jump starter battery is low or cable is faulty. | Charge the jump starter. Try a different USB cable. |
13. User Tips
- Always keep the jump starter charged, especially before long trips or during cold weather.
- In extremely cold conditions, keep the jump starter indoors until ready to use, as cold can temporarily reduce battery performance.
- Ensure the smart cable connection to the jump starter unit is very firm to avoid poor contact during jump starting.
- After jump starting, allow your vehicle to run for at least 15-20 minutes to recharge its own battery.
14. Warranty and Support
BRPOM products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase documentation or visit the official BRPOM website.
