1. Introduction
Thank you for choosing the HZTZ A4 Portable Wireless Mobile Inkless Thermal Printer. This manual provides essential information for setting up, operating, and maintaining your printer. Please read it carefully before use to ensure optimal performance and longevity of your device.
Video: Product demonstration including unboxing, app installation, connection, and various printing functions.
2. Setup Guide
2.1 Unboxing and Components
Upon opening the package, ensure all components are present:
- HZTZ A4 Thermal Printer
- USB Data Cable
- Instruction Manual
- Thermal Paper Roll (quantity may vary based on package)
2.2 Charging the Printer
For optimal performance, fully charge the device before first use and after the first few uses. Use a 5V-2A power adapter (a mobile phone charger is recommended) to charge the printer via the USB Data Cable. The Power Indicator Light will show red during charging and green when fully charged.
2.3 Paper Installation
Roll Paper Installation:
- Press the Paper Replacement Button (located on the side) simultaneously to open the printer cover.
- Insert the thermal paper roll into the designated slot.
- Close the printer cover securely.
Folded Paper Installation:
Ensure there is no roll paper inside the printer when using folded paper.
- Ensure the printer cover is closed.
- Turn on the printer.
- Place/insert the print side of the folded paper into the paper entry slot. The printer will automatically feed the paper.

Image: Demonstrates loading both roll paper (internally) and folded paper (externally).
2.4 App and Driver Installation
Mobile App (Bluetooth Connection):
- Long press the power button for 2 seconds to turn on the printer.
- Search for 'HPrint' on Google Play (Android) or the App Store (iOS), or scan the QR code provided in the manual to download the app.
- On the APP homepage, click 'Connect to Printer' in the upper right corner. Turn on your phone's Bluetooth function.
- Use the 'Scan QR Code' option within the app to connect to the printer by scanning the QR code printed by the device (double-click the function button to get the printer connection code). Note: Do not search for the printer through your phone's Bluetooth settings directly.
Computer Driver (USB Connection):
For printing from a computer (Windows, Mac OS, Linux), connect the printer via the USB cable. Download the necessary drivers from the official website: http://www.gzxlscan.cn.

Image: Connection methods for mobile (Bluetooth) and computer (USB).
3. Operating Instructions
3.1 Power On/Off and Status Indicators
- Power On/Off: Long press the power button for 2 seconds.
- Power Indicator Light Status:
- Green light on: Normal printing, idle, or battery fully charged.
- Red light on: Cover open, out of paper, over-heat, or charging.
- Green light flashing: Sheet Feed Mode (insert folded paper properly).
- Red light flashing: Low battery (charge promptly).
- Terminate Printing: Single press the power button.
3.2 Printing Documents and Images (via Mobile App)
Once connected via Bluetooth:
- In the HPrint app, select the type of content you wish to print (Document, Photo, Webpage, Tattoo).
- Import or select the file/image. The printer supports various formats including Word, Excel, PDF, JPG, and TXT.
- Edit the content as needed within the app (e.g., adjust print density: Low, Mid, High; print mode: Line, Text, Image).
- Confirm settings and tap 'Print'. The printer supports continuous printing for multi-page documents.

Image: Demonstrates multi-format printing capabilities.
3.3 Specialized Printing
Tattoo Paper Printing:
The printer supports printing on specialized tattoo transfer paper. Load the tattoo paper as instructed for folded paper, select your image in the app, and print.

Image: Illustrates the printer's capability to print on tattoo paper.
Sticker Printing:
The printer can also print on thermal sticker paper. Load the sticker paper and print your desired designs.
4. Maintenance
4.1 Cleaning the Printhead
Regular cleaning of the printhead ensures clear and consistent print quality.
- Caution: Unplug the printer before cleaning. Avoid touching the electronic components inside the printer.
- Power off the printer and open the paper tray cover to remove any paper.
- Dampen a cotton swab with isopropyl alcohol and gently wipe the printhead from the center outwards.
- After cleaning, allow the printhead to air dry for 1-2 minutes to ensure all alcohol has evaporated before using the printer.
4.2 Battery Care
To prevent battery damage, recharge the device every 3 months if it has not been used for an extended period.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Printer not turning on | Low battery or power issue | Charge the printer using the provided USB cable and a 5V-2A adapter. |
| No paper feed / Paper jam | Incorrect paper loading or empty paper roll | Ensure paper is loaded correctly and the cover is closed. Replace paper roll if empty. |
| Poor print quality (faint, streaky) | Dirty printhead or low battery | Clean the printhead as per maintenance instructions. Ensure printer is fully charged. |
| Cannot connect via Bluetooth | Incorrect connection method or Bluetooth off | Ensure Bluetooth is enabled on your phone. Connect via the 'Scan QR Code' option in the HPrint app, not directly through phone settings. Double-click the printer's function button to get the connection QR code. |
| Printer not recognized by computer | Missing or incorrect drivers | Download and install the correct drivers from http://www.gzxlscan.cn. |
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | HZTZ |
| Type | Thermal Printer |
| Print Resolution | 300 DPI |
| Print Speed | 28ppm |
| Max Paper Size | 216mm (A4, US Letter/Legal) |
| Paper Feed Mode | Roll Feed, Folding Paper (External) |
| Double-sided Printing | No |
| Interface Type | Bluetooth, USB |
| Supports Network Printing | Wired/Wireless |
| Battery Included | Yes |
| Battery Capacity | 2600mAh |
| Continuous Work Time | 3 hours |
| Standby Time | 58 hours |
| Dimensions (L x W x H) | 26.5cm x 8cm x 4.5cm (10.43 x 3.15 x 1.77 inches) |
| Net Weight | 652g |

Image: Highlights the 300 DPI resolution for sharper printing.

Image: Illustrates the compact size and portability of the printer, with a net weight of 652g.

Image: Detailed dimensions and battery life information.
7. Warranty and Support
For after-sales questions or technical support, please contact us via WhatsApp at +8613622200981.
8. User Tips
- Always use high-quality thermal paper for the best print results and to prolong the life of your printhead.
- Ensure the paper is loaded correctly and smoothly to prevent jams and misprints.
- Keep the printer's printhead clean to maintain optimal print clarity and prevent streaks.
- When connecting via Bluetooth, always use the dedicated 'HPrint' app and its QR code scanning feature for a stable connection. Avoid pairing directly through your phone's system Bluetooth settings.
- This printer is designed for portability, making it ideal for use in various settings such as during travel, commutes, for homework, or business needs.

Image: Demonstrates the printer's versatility for use anytime and anywhere.