1. Introduction
Thank you for choosing the Recordio GAX-802D 8 Channel Digital Audio Mixer Console. This professional amplifier mixer is designed for a wide range of audio applications, including karaoke, live performances, studio recording, and home use. Featuring 8 input channels, built-in 48V phantom power, a digital multi-effects processor (DSP), and USB connectivity, the GAX-802D provides versatile and high-quality sound mixing capabilities. This manual will guide you through the setup, operation, and maintenance of your new mixer to ensure optimal performance and longevity.
2. Safety Information
WARNING: RISK OF ELECTRIC SHOCK. DO NOT OPEN.
- To reduce the risk of electric shock, do not remove the cover (or back).
- There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
- To prevent fire or electric shock hazards, do not expose this appliance to rain or moisture.
- Ensure the power supply voltage matches the requirements specified on the unit.
- Do not place the unit near heat sources or in direct sunlight.
- Keep the unit away from water or excessive humidity.
- Always disconnect the power cable before cleaning or when not in use for extended periods.
- Use only attachments/accessories specified by the manufacturer.
3. Package Contents
Please check that all items listed below are included in your package:
- Recordio GAX-802D 8 Channel Digital Audio Mixer Console
- Power Cable
- User Manual (this document)

Figure 3.1: Included Power Cable
4. Product Overview
The GAX-802D mixer console features a user-friendly layout with comprehensive controls for each channel and master output. Below are diagrams highlighting key components and their functions.

Figure 4.1: GAX-802D Front Panel Layout

Figure 4.2: GAX-802D Rear Panel Connections

Figure 4.3: GAX-802D Dimensions (Approx. 41.5cm x 31.7cm x 11cm)
4.1 Front Panel Features
- Channels (CH1-CH8): Each channel features XLR and 1/4" TRS inputs for microphones and line-level devices.
- Gain Control: Adjusts the input sensitivity for each channel.
- 3-Band EQ: High, Mid, and Low frequency controls for tone shaping on mono channels.
- PAN Control: Adjusts the stereo position of the channel signal.
- Level Faders: Individual faders for precise volume control of each channel.
- DSP Effects: Built-in 16 digital multi-effects processor with level control and selection.
- Graphic Equalizer: Master EQ for overall sound adjustment.
- +48V Phantom Power: Switchable phantom power for condenser microphones.
- USB/MP3 Player: Integrated player for audio playback from USB drives.
- Digital Display: Shows DSP effect number and MP3 player status.
- Output Level Display: LED meters to monitor main output levels.
- Phones Output: 1/4" stereo jack for headphone monitoring with dedicated level control.
- Main Output Faders: Separate faders for Left and Right main outputs.

Figure 4.4: Straight Slide Faders for Volume and DSP Effect Control

Figure 4.5: Digital Display and Mixer Fader Detail

Figure 4.6: Built-in Five-band Equalizer

Figure 4.7: LED Digital Display, Output Level, and Cooling Fan

Figure 4.8: MP3 Control Area and USB Input
4.2 Rear Panel Features
- Power Switch: Turns the unit on/off.
- AC INPUT/FUSE: Power input socket and fuse holder.
- Speaker Output (LEFT/RIGHT): Connects to passive speakers.
- Cooling Fan: Ensures proper heat dissipation during operation.
5. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Recordio |
| Model Number | GAX-802D |
| Item Type | Microphone Amplifier |
| Product Name | 8 Channel Mixing Console Audio Bluetooth Power Amplifier Mixer |
| Material | Metal+plastic |
| Input Channels | 8 channels |
| Phantom Power | +48 V |
| Output Power | 450W*2 (4Ω) |
| Mono Channel EQ | 3-Band |
| Type | With LCD display MP3 |
| Application | Disco, Bar, Club, Home |
| Use | Portable/Household/Studio |
| Package Length | 49 cm |
| Package Width | 42 cm |
| Package Height | 23 cm |
| Package Weight | 10.0 kg |
6. Setup
Follow these steps to set up your GAX-802D mixer console:
- Power Connection: Ensure the mixer's power switch is in the 'OFF' position. Connect the provided power cable to the AC INPUT/FUSE socket on the rear panel and then to a suitable power outlet.
- Speaker Connection: Connect your passive speakers to the 'SPEAKER OUTPUT' (LEFT and RIGHT) terminals on the rear panel. Ensure correct polarity (+ to + and - to -).
- Microphone Connection: For dynamic microphones, connect them to the XLR or 1/4" TRS inputs of channels 1-8. For condenser microphones requiring power, connect them via XLR cables and activate the '+48V PHANTOM' power switch (located near the master section) after all microphones are connected and before increasing channel gain.
- Instrument/Line-Level Device Connection: Connect instruments (e.g., keyboards, guitars with preamps) or other line-level devices (e.g., CD players, media players) to the 1/4" TRS inputs of channels 1-8 or the dedicated stereo line inputs if available.
- USB Device Connection: Insert a USB flash drive containing MP3 audio files into the USB port on the front panel.
- Headphone Connection: Connect your headphones to the 'PHONES' 1/4" stereo jack for monitoring.
- Power On: Once all connections are secure, switch the mixer's power to 'ON'.
7. Operating Instructions
This section outlines the basic operation of your GAX-802D mixer.
7.1 Basic Mixing
- Set Initial Levels: Before playing any audio, ensure all channel faders and the main output faders are at their lowest setting. Set all EQ knobs to the center (flat) position.
- Adjust Gain: For each active input channel, slowly increase the 'GAIN' knob until the signal peaks are visible on the channel's level indicator, but do not consistently clip (red light).
- Adjust Channel Volume: Slowly raise the individual channel fader to bring the signal into the mix.
- Adjust Main Output: Gradually raise the 'MAIN L/R' faders to achieve the desired overall volume. Monitor the main output level display to avoid clipping.
- Equalization (EQ): Use the 3-band EQ knobs on each mono channel to shape the tone of the input signal. Turn clockwise to boost frequencies, counter-clockwise to cut.
- Pan Control: Use the 'PAN' knob to position the sound of each channel within the stereo field (left to right).
7.2 DSP Effects
The GAX-802D features 16 digital multi-effects.
- Select Effect: Use the 'DOWN' and 'UP' buttons near the digital display to cycle through the 16 available effects. The selected effect number will be shown on the display.
- Apply Effect: Use the 'SEND/EFF' knob on each channel to send a portion of that channel's signal to the DSP effects processor.
- Adjust Effect Level: Use the dedicated 'EFFECT' fader in the master section to control the overall volume of the applied effects in the main mix.
7.3 USB/MP3 Playback
- Insert USB: Insert a USB flash drive with MP3 files into the USB port.
- Control Playback: Use the playback controls (Play/Pause, Next, Previous) in the MP3 control area to manage your audio.
- Adjust Volume: Use the 'MP3/AUX VOL' knob to control the playback volume of the USB audio.
7.4 Monitoring
Connect headphones to the 'PHONES' jack and use the 'PHONE LEVEL' knob to adjust the headphone volume for personal monitoring.

Figure 7.1: Versatile Applications of the GAX-802D Mixer
8. Maintenance
Proper maintenance ensures the longevity and reliable performance of your mixer.
- Cleaning: Use a soft, dry cloth to clean the exterior of the mixer. Avoid using abrasive cleaners, solvents, or waxes. Do not spray liquids directly onto the unit.
- Ventilation: Ensure the cooling fan and radiating holes on the side of the unit are not obstructed to allow for proper heat dissipation. Operating the mixer in a well-ventilated area is crucial.
- Storage: When not in use, store the mixer in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, cover the unit to protect it from dust.
- Faders and Knobs: Avoid applying excessive force to faders and knobs. If they become stiff or noisy, consult a qualified technician.
9. Troubleshooting
If you encounter issues with your GAX-802D mixer, refer to the following common problems and solutions:
- No Power:
- Check if the power cable is securely connected to both the mixer and the power outlet.
- Ensure the power switch is in the 'ON' position.
- Verify the power outlet is functional.
- Check the fuse on the rear panel. If blown, replace it with a fuse of the same type and rating.
- No Sound Output:
- Ensure all input sources are connected correctly and are producing sound.
- Check that channel 'GAIN' and 'LEVEL' faders are raised.
- Verify that the 'MAIN L/R' faders are raised.
- Ensure speakers are connected correctly and are powered on (if active).
- Check the 'PHONES' level if monitoring with headphones.
- Confirm that the 'MUTE' or 'PFL' (Pre-Fader Listen) buttons are not engaged incorrectly on channels or master.
- Distorted Sound:
- Reduce the 'GAIN' on the input channel if the channel's peak LED is constantly red.
- Lower the channel 'LEVEL' or 'MAIN L/R' faders if the main output level display shows consistent clipping.
- Check input cables for damage or improper connection.
- Ensure the impedance of connected devices matches the mixer's inputs.
- Phantom Power Not Working:
- Ensure the '+48V PHANTOM' switch is activated.
- Verify that condenser microphones are connected via XLR cables, as phantom power is typically supplied through XLR.
- Check the XLR cables for damage.
- USB Playback Issues:
- Ensure the USB drive is properly inserted.
- Verify that the audio files on the USB drive are in a supported format (e.g., MP3).
- Try a different USB drive to rule out drive issues.
- Check the 'MP3/AUX VOL' knob is turned up.
10. User Tips
- Gain Staging: Always set your input gain (preamp gain) correctly first. This ensures a strong, clean signal before it reaches the faders and effects, minimizing noise and distortion.
- EQ Usage: Use the equalizer to enhance the sound, not just to fix problems. A little goes a long way. Start with subtle adjustments.
- Phantom Power: Only activate +48V phantom power when using condenser microphones that require it. Ensure dynamic microphones are not connected when activating phantom power, as it could potentially damage some older dynamic microphones (though most modern ones are protected).
- Cable Management: Organize your cables neatly to prevent tripping hazards, reduce interference, and make troubleshooting easier.
- Test Before Performance: Always perform a sound check before any live performance or recording session to ensure all connections are working and levels are properly set.
11. Warranty and Support
The Recordio GAX-802D mixer console comes with a manufacturer's warranty. For specific warranty details, terms, and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or service inquiries, please reach out to the official Recordio support channels or your authorized dealer.
Brand: Recordio
Model: GAX-802D