BAOFENG UV-9R PRO

Contents

BAOFENG UV-9R PRO Multi Band Walkie Talkie User Manual

Model: UV-9R PRO

1. Introduction

Thank you for purchasing the BAOFENG UV-9R PRO Series Amateur Radio. This dual-band, dual-display, dual-watch radio is designed to provide secure, instant, and reliable communications. Please read this manual carefully to ensure maximum performance and safe operation of your radio.

2. Safety Warnings and Regulations

2.1 General Safety Information

  • WARNING: Modification of this device to receive cellular radiotelephone service signals is prohibited under FCC rules and federal law.
  • ATTENTION: When programming the radio, always start by reading the factory software data before rewriting. Ensure your programming complies with FCC (or EU) license certifications.
  • ATTENTION: Before use, read the RF Energy Exposure and Product Safety Guide provided with the radio for safe usage and compliance with applicable standards.

2.2 RF Exposure Compliance and Control

To ensure compliance with occupational/controlled environmental exposure limits, adhere to the following:

  • Do not remove the RF Exposure Label.
  • User awareness instructions should accompany the device.
  • Transmit no more than 50% of the time. Press the Push-to-Talk (PTT) key to transmit and release to receive.
  • Keep the radio unit at least 2.5cm away from your face during transmission.
  • When worn on the body, use an approved holder, holster, case, or belt clip.
  • Use only approved antennas, batteries, and accessories.

2.3 Operating Prohibitions

  • Do not operate in locations with fuels, chemicals, or explosive atmospheres unless using an approved Ex-protection model.
  • Do not operate near any blasting area.
  • Do not operate near medical or electronic equipment vulnerable to RF signals.
  • Do not hold the product while driving.
  • Do not operate where wireless communication is prohibited.

2.4 Precautions for Batteries

Charging Prohibitions:

  • Do not charge or replace batteries in locations containing fuels, chemicals, or explosive atmospheres.
  • Do not charge wet batteries; dry them thoroughly first.
  • Do not charge deformed, leaking, or overheated batteries.
  • Do not charge with unauthorized chargers.
  • Do not charge in locations with strong radiation.
  • Avoid overcharging to prolong battery life.

Maintenance Instructions:

  • Clean charging connectors regularly with a dry cloth.
  • Charge batteries between 5°C and 40°C.
  • Turn off the radio when charging a battery attached to the product.
  • Do not remove the battery or unplug the power cord during charging.
  • Do not dispose of batteries in fire.
  • Do not expose batteries to direct sunlight or other heat sources.

2.5 Transportation Instructions

  • Damaged batteries must not be transported.
  • Separate batteries from metal parts or other batteries if transporting multiple in one package.
  • The radio must be switched off and secured against accidental activation if the battery is attached.

3. Product Features

  • Multi-Band Frequency:
    Multi-Band Frequency Ranges

    Image: BAOFENG UV-9R PRO displaying its multi-band frequency capabilities.

    • FM: 65-108 MHz (RX only)
    • AM: 108-136 MHz (Air Frequency Receiving)
    • VHF: 136-174 MHz (RX & TX)
    • UHF: 350-390 MHz (RX only)
    • UHF: 400-520 MHz (RX & TX)
  • IP68 Waterproof: Designed to withstand water immersion.
    IP68 Waterproof Feature

    Image: BAOFENG UV-9R PRO submerged in water, demonstrating its IP68 waterproof rating.

  • Wireless Copy Frequency: Quickly copy frequencies from other radios.
    Wireless Copy Frequency Instruction

    Image: Two walkie-talkies, one BAOFENG UV-9R PRO, illustrating the one-key frequency copy process.

  • Tri-Power Output: High, Mid, and Low power settings.
    Tri-Power Levels

    Image: BAOFENG UV-9R PRO showing High, Mid, and Low power output indicators (TXP H, TXP M, TXP L).

  • 128 Memory Channels: Store frequently used frequencies.
  • CTCSS/DCS Codes: 50 CTCSS tones and 210 DCS codes for privacy.
  • SOS Emergency Function: For urgent situations.
  • DTMF Function: Dual-Tone Multi-Frequency for advanced signaling.
  • Alarm Function: Built-in alarm for emergencies.
  • Type-C USB Charging: Modern and convenient charging method.
    Type-C and Base Charging Methods

    Image: Two charging methods for the BAOFENG UV-9R PRO: Type-C direct charging and traditional base charging.

  • FM Radio: Listen to FM broadcasts (65-108 MHz).
  • LCD Display with Backlight: Adjustable backlight in multiple colors (Blue, Orange, Purple, or Off).
  • VOX Function: Voice-operated transmission for hands-free operation.
  • Scan Function: Frequency and channel scanning.
  • Dual Watch: Monitor two frequencies/channels simultaneously.
  • Keypad Lock: Prevents accidental key presses.
  • High Brightness Flashlight: For illumination in dark environments.
    High Brightness Flashlight

    Image: BAOFENG UV-9R PRO with its flashlight activated, illuminating a dark area, with examples of night camping and hunting.

  • PC & Manual Programmable: Program settings via computer software or directly through the keypad.

4. Package Contents

The standard package includes:

  • 1 x BAOFENG UV-9R PRO Radio
  • 1 x Li-Ion Battery Pack (1800mAh)
  • 1 x Antenna
  • 1 x Desktop Charger (if selected)
  • 1 x Wall Adaptor
  • 1 x Belt Clip
  • 1 x Lanyard
  • 1 x User Manual (PDF available at PDF User Manual)

If any item is missing, please contact your BAOFENG dealer.

BAOFENG UV-9R PRO Accessories

Image: Overview of the BAOFENG UV-9R PRO radio and its standard accessories including antenna, battery, desktop charger, clip, lanyard, and user manual.

5. Setup and Installation

5.1 Charging the Battery Pack

The Li-ion battery pack is not fully charged at the factory. Charge it before first use. Full capacity is reached after 2-3 charge/discharge cycles.

  1. Plug the AC adaptor into an AC outlet, then connect it to the DC jack on the back of the charger. The indicator will blink orange.
  2. Insert the battery or the radio with the battery into the charger. Ensure good contact with charging terminals. The indicator will turn red.
  3. Charging takes approximately 2-5 hours. When the light turns green, charging is complete.
  4. Remove the battery or radio from the charger.

LED Indicator Status:

StatusLED Indication
No BatteryGreen and red alternately flashing
Charge NormallyRed
Fully ChargedGreen
Trouble (e.g., battery too warm, short-circuited)Red blinks fast for a long time

5.2 Installing/Removing the Antenna

  • Installing: Screw the antenna clockwise into the connector on top of the transceiver until secure.
  • Removing: Turn the antenna counter-clockwise.

5.3 Installing the Belt Clip

  1. Install the belt clip fixing head into the slot on the back of the radio and tighten the screws.
  2. Slide the rotating belt clip along the guide until you hear a "click."
  3. To remove, press the disassembly engine upwards and push the belt clip with your thumb.

5.4 Installing the Battery Pack

Ensure the radio is turned off before attaching or removing the battery.

  1. Insert the two protrusions on the front of the battery into the notches on the bottom of the radio.
  2. Press the tail of the battery towards the radio until you hear a "click."
  3. To remove, turn off the radio, lift the battery push button, and slide the battery backwards.

5.5 Installing Additional Speaker/Microphone (Optional)

  1. Unscrew the headset cover using a flat-blade screwdriver.
  2. Insert the protruding part of the headset into the slot and align the nut with the threaded hole. Rotate clockwise until tightened.

Note: Incorrect accessory installation may affect the product's waterproof performance.

6. Radio Overview: Buttons and Controls

BAOFENG UV-9R PRO Labeled Diagram

Image: Labeled diagram of the BAOFENG UV-9R PRO showing its various buttons, controls, and components.

  1. Antenna
  2. LED Indicator (Red for transmission, Green for reception)
  3. Flashlight
  4. SOS Button: Press for 5 seconds to activate alarm mode.
  5. Power / Switch / Volume Control: Rotate clockwise to turn on/off and adjust volume.
  6. Speaker
  7. Microphone
  8. LCD Display
  9. EXIT Button: Press to exit Menu and functions. Use for A/B frequency selection.
  10. # Button: Keypad lock (long press), High/Low power selection (short press).
  11. PTT (Push-to-Talk) Button
  12. SK1 Button: Short press for FM radio on/off. Long press for One-touch frequency search.
  13. SK2 Button: Short press for flashlight on/off (strobe mode with second press). Long press for Monitor function.
  14. ▲/▼ Keys: Select functions/menu items.
  15. MENU Button: Enter Menu, confirm selections. Long press from off state to switch between frequency/channel mode.
  16. *SCAN Key: Short press for Reverse frequency. Long press for SCAN function.
  17. MIC/SP: External speaker/microphone jacks.
  18. 1800mAh Li-Ion Battery Pack
  19. Battery Release Latch

6.1 LCD Display Indications

  • DCS or CTCSS: Indicates set code for TX or RX.
  • Received Signal Strength: Bar indicator.
  • Low Power Selection: Icon displayed when low power is selected.
  • Dual Watch: Letter displayed when Dual Watch is active.
  • VOX Function: Icon displayed when VOX is enabled.
  • Positive Shift: Icon displayed when a positive shift is activated.
  • Negative Shift: Icon displayed when a negative shift is activated.
  • Reverse Frequency: Icon displayed.
  • Narrow Bandwidth: 'N' displayed for narrow bandwidth.
  • Keypad Lock: Icon displayed when keypad is locked.
  • Battery Level Indicator: Shows battery charge level. Blinks and beeps when low.
  • Channel Number: Displays the stored channel number.
  • Frequency/Channel Name/Menu Setting: Displays current operating information.
  • VFO Indicator: Indicates VFO mode is active.

7. Basic Operations

7.1 Power On/Off

  • To Turn On: Rotate the Volume/Power knob clockwise until you hear a "click." The radio will display a frequency or channel.
  • To Turn Off: Rotate the Volume/Power knob counter-clockwise until you hear a "click."

7.2 Adjusting the Volume

Rotate the Volume/Power knob clockwise to increase volume, counter-clockwise to decrease. Be careful not to turn it off accidentally.

7.3 Making a Call

  • Channel Mode Call: Select a channel, then hold down the PTT key to transmit. Speak into the microphone with a normal tone. The red LED will illuminate.
  • Frequency Mode Call: From off state, long press MENU to enter frequency mode. Enter the desired frequency, then hold PTT to transmit.
  • Receiving a Call: Release the PTT key to receive. The green LED will illuminate when receiving.

Note: For best reception, keep the microphone 2.5 cm to 5 cm from your mouth during transmission.

7.4 Channel Selection

The radio operates in two modes: Frequency (VFO) mode and Channel (MR) mode.

  • Frequency (VFO) Mode: Used for direct frequency input and experimentation. Navigate with ▲/▼ keys or input directly via keypad.
  • Channel (MR) Mode: Used for selecting pre-programmed channels. Navigate with ▲/▼ keys.

7.5 One-Key Frequency Copy (Wireless Copy Frequency)

  1. Power on the UV-9R PRO and press the SK1 key to enter the "SEARCH" interface. The screen will display "SEARCH SWEEK..."
  2. Press and hold the PTT button on the other walkie talkie you wish to copy from. The UV-9R PRO will search for its transmission frequency and privacy code.
  3. Once found, press the MENU button to confirm and store the frequency.
  4. Switch to channel mode, and the display will show the copied frequency. You can now communicate.

8. Advanced Features and Menu System

The UV-9R PRO offers a comprehensive menu system for advanced configuration. For a complete reference on available menu items and parameters, please refer to the full user manual PDF.

Accessing the Menu:

  1. Press the [MENU] key to enter the menu.
  2. Use the [▲] and [▼] keys to navigate between menu items.
  3. Press [MENU] again to select a menu item.
  4. Use [▲] and [▼] keys to select the desired parameter.
  5. Press [MENU] to confirm and save, or [EXIT] to cancel.

Using Shortcuts: Each menu item has a numerical value for direct access. Press [MENU], enter the number via the keypad, then press [MENU] again to select.

Key Functions Overview:

  • Squelch Level (SQL): Adjusts receiver sensitivity (0-9 levels).
  • Step Frequency (STEP): Sets frequency step (2.5KHz to 50KHz).
  • Output Power (TXP): Selects High, Mid, or Low transmit power.
  • Battery Save (SAVE): Configures power-saving mode (OFF, 1:1, 1:2, 1:3, 1:4).
  • VOX Function (VOX): Enables voice-activated transmission (OFF, 1-10 levels).
  • Wide/Narrow Bandwidth (WN): Selects 25KHz (Wide) or 12.5KHz (Narrow).
  • Backlight (ABR): Adjusts display backlight auto-off time (1-5 seconds).
  • Dual Watch Operation (TDR): Monitors two channels/frequencies.
  • Keypad Beep (BEEP): Toggles keypad tone.
  • Time-Out-Timer (TOT): Limits transmission time (15s, 30s, 45s, etc.).
  • Receiving/Transmitting DCS/CTCSS: Configures digital/continuous tone-coded squelch.
  • Voice Function (VOICE): Toggles voice prompts.
  • ANI-ID (ANI-ID): Sets Automatic Number Identification code (programmable via software).
  • DTMFST (DTMFST): Controls DTMF side tone audibility.
  • SCAN Resume Mode (SC-REV): Sets scanner behavior (Time-operated, Carrier-operated, Search).
  • PTT-ID (PTT-ID): Configures when ANI-ID is sent (OFF, BOT, EOT, BOTH).
  • PTT ID Delay (PTT-LT): Sets delay time for PTT-ID transmission.
  • Channel Display Mode (MDF-A/B): Sets display for Channel A/B (Frequency, Channel Number, Name).
  • Busy Channel Lock (BCL): Prevents transmission on busy channels.
  • Auto Keypad Lock (AUTOLK): Automatically locks keypad after 15s.
  • Frequency Offset Direction (SFT-D): Sets frequency offset direction (+, -, OFF).
  • Frequency Offset (OFFSET): Sets frequency deviation (0-69.990MHz).
  • Channel Store (MEM-CH): Stores current frequency/parameters to a channel.
  • Channel Delete (DEL-CH): Deletes a stored channel.
  • Standby/RX/TX Backlight (WT-LED/RX-LED/TX-LED): Sets backlight color for standby, receiving, and transmitting (OFF, BLUE, ORANGE, PURPLE).
  • Alarm Mode (AL-MOD): Sets alarm type (SITE, TONE, CODE).
  • Band Selection (BAND): Selects VHF or UHF band in VFO/Frequency mode.
  • Repeater Tone (R-TONE): Sends 1000Hz, 1450Hz, 1750Hz, or 2100Hz repeater tone.
  • Reset (RESET): Resets radio to factory defaults (VFO Reset or ALL Reset).

For detailed instructions on each menu item, please consult the full user manual PDF.

9. Troubleshooting Guide

If you encounter issues with your radio, refer to the table below for common problems and solutions. For persistent issues, contact technical support.

PhenomenaAnalysisSolution
Cannot turn on the radio.Battery installed improperly, power run out, poor contact.Reattach/replace battery, clean contacts.
Voice weak or intermittent during reception.Battery voltage low, volume level low, antenna loose/incorrectly installed, speaker blocked.Recharge/replace battery, increase volume, reattach antenna, clean speaker.
Cannot communicate with other group members.Frequency/signaling type inconsistent, too far from others.Verify TX/RX frequency/signaling, move closer.
Hear unknown voices or noise.Interrupted by other radios, radio in analog mode with no signaling.Change frequency, adjust squelch, request dealer to set signaling.
Unable to hear anyone due to too much noise/hiss.Too far from others, unfavorable position (blocked by buildings/underground).Move closer, move to open area, restart radio.
Radio keeps transmitting.VOX turned on, headset not in place, external disturbance.Turn off VOX, check headset, stay away from interference sources.

10. Specifications

AttributeSpecification
Model NumberUV-9R PRO
Brand NameBAOFENG
Walkie Talkie TypePortable
Frequency Range (Tx, USA)144.0-148.0 & 420.0-450.0MHz (FCC Rule parts 97)
Frequency Range (Scanning Receiver, USA)136.0-174.0 & 400.0-480.0MHz (FCC Rule parts 15B)
Frequency Range (Tx/Rx, EU)144.0-146.0 & 430.0-440.0MHz
Memory Channels128
Operation VoltageDC 7.4 V ±10%
Battery Capacity1800mAh (Li-Ion)
Transmission Current≤1800mA
Receive Sensitivity0.25µV (12dB SINAD)
Power Output1W @16 ohms (5W-10W range)
Receive Current≤380mA
Rated Audio Distortion≤5%
Waterproof / Water-ResistantIP68
Maximum Range5km-10km
DisplayYes
Rechargeable Battery IncludedYes

ATTENTION: Operating frequencies are divided into transmit and receive frequencies. Please comply with local radio regulations.

11. User Tips

  • Wireless Copy Frequency: This feature is highly praised for its ease of use. To quickly set up communication with another radio, use the one-key frequency copy function (SK1 button, then PTT on the other radio, then MENU to save). This avoids manual programming.
  • Type-C Charging: The Type-C port offers versatile charging options. You can charge your radio using a power bank, car charger, or laptop, making it convenient for outdoor activities or when a traditional base charger isn't available.
  • Waterproof Feature: The IP68 rating provides peace of mind for outdoor use. Users appreciate its robustness in various weather conditions, including rain.
  • Audio Quality: Users report clear and powerful audio, enhancing communication effectiveness.

12. Warranty and Support

For detailed warranty information and technical support, please refer to the official BAOFENG documentation or contact your authorized dealer. The full EU Declaration of Conformity is available at Baofeng Official Website.

13. Declaration of Conformity

BAOFENG declares that the UV-9R PRO Series Amateur Radio complies with Directive 2014/53/EU and other relevant provisions. Operation of this unit in Transmit mode requires a valid Amateur Radio License in many countries. Failure to comply may result in legal penalties.

14. Disclaimer

The Company endeavors to ensure the accuracy and completeness of this manual. All specifications and designs are subject to change without notice due to continuous technological development. No part of this manual may be copied, modified, translated, or distributed without prior written consent of the Company. The Company does not guarantee the accuracy, validity, timeliness, legitimacy, or completeness of third-party products and contents involved in this manual.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.