RMshebei WTDZW-63A/N

Contents

RMshebei 2P TUYA APP WIFI Smart Energy Power Overload kWh Meter Circuit Breaker Time Relay Switch Leakage Voltage Protector 63A User Manual

Model: WTDZW-63A/N

1. Introduction

The RMshebei 2P TUYA APP WIFI Smart Energy Power Overload kWh Meter Circuit Breaker is an advanced device designed for comprehensive electricity management and protection. It integrates remote control, energy metering, and various protective functions into a single unit, allowing for smart control and monitoring via the Tuya Smart or Smart Life mobile applications, as well as voice control through Amazon Alexa and Google Assistant.

This device offers features such as auto-shift current by timeframe, over/under voltage protection, over/lost current protection, residual current (leakage) protection, electricity metering (including prepaid function), and PV metering. It is suitable for a wide range of applications including power distribution rooms, household electricity management, and site equipment control.

RMshebei 2P 63A WiFi Circuit Breaker with display showing voltage, current, and kWh, alongside a phone displaying the app interface.
Figure 1: RMshebei 2P 63A WiFi Circuit Breaker with key features highlighted.
Collage of application scenarios including power distribution room, camera management, household electricity, room lighting, site equipment control, and household appliances.
Figure 2: Various application scenarios for the smart energy meter and protector.

2. Specifications

2.1. Technical Parameters

ParameterValue
Brand NameRMshebei
Model NumberWTDZW-63A/N
TypeMini Circuit breaker
Poles Number2
Rated Current63A
Rated Voltage220V (AC110/230V)
Operating VoltageAC80V-300V (single phase)
Working Frequency50/60Hz
Is Smart DeviceYes (Tuya Smart, Smart Life, Amazon Alexa, Google Assistant)
Wireless FunctionalityYes
CertificationCE, RoHS, FCC
Electrical Life105 cycles
Mechanical Life105 cycles
Protection LevelIP20
Pollution Level3
Altitude<2000m
Working Humidity≤50% at 40°C (no condensation)
Voltage Measurement Accuracy1% (not exceeding 1% of the total range)
Rated Insulation Voltage400V
Output Contact1NO

2.2. Product Dimensions

Diagram showing the dimensions of the RMshebei smart energy meter: 36.8mm width, 85.3mm height, 65.3mm depth.
Figure 3: Product dimensions (Width: 36.8mm, Height: 85.3mm, Depth: 65.3mm).

3. Setup and Installation

3.1. Wiring Diagram

Ensure all power is disconnected before attempting any wiring. This device is designed for single-phase 2P installation. Connect the Neutral (N) and Live (L) lines to the Power Terminal (IN) and Load End (OUT) as indicated.

Wiring diagram for PV Metering showing connection from State Grid to the smart meter, and from the smart meter to a house and an inverter connected to a PV panel.
Figure 4: Example wiring diagram for PV Metering. Power Terminal (IN) and Load End (OUT) are clearly marked.

3.2. How to Add Device to App

To utilize the smart features of your RMshebei circuit breaker, you need to connect it to the Tuya Smart or Smart Life application:

  1. Download the App: Use your smartphone to scan the QR codes provided in the manual or search for "Smart Life" or "Tuya Smart" in Google Play Store (for Android) or Apple App Store (for iOS) to download and install the application.
  2. Create an Account: Open the app and create an account using your mobile number or email address.
  3. Connect to Wi-Fi: Ensure your mobile phone is connected to a 2.4 GHz Wi-Fi network. The device does not support 5 GHz Wi-Fi.
  4. Add Device:
    • Click the "+" icon in the upper right corner of the app's homepage or select "Add Device".
    • Navigate to the "Energy" category and select "Switch module (Wi-Fi)" or "Breaker".
    • On the physical device, long-press the Wi-Fi button for 5 seconds until the indicator light starts to flash quickly.
    • Follow the on-screen prompts in the app to complete the pairing process. You may need to enter your Wi-Fi password.
Screenshot of the Tuya Smart app interface showing energy monitoring data, including total forward energy, current, voltage, and leakage current.
Figure 5: Remote control and data viewing via the mobile app.

4. Operating Instructions

The RMshebei Smart Energy Meter & Protector offers extensive control and monitoring capabilities:

4.1. Remote Control and Monitoring

You can remotely control the power on/off of the device from anywhere using the mobile app. The app also allows you to view real-time data such as current, power, voltage, leakage current, temperature, number of faults, total battery capacity, and recharge capacity.

4.2. Voice Control

Integrate your device with Amazon Alexa or Google Assistant for convenient voice control. Once connected, you can use voice commands to turn the device on or off.

Image showing Amazon Echo and Google Home devices in a kitchen setting, with a speech bubble indicating voice command 'Alexa, turn on the...'.
Figure 6: Voice control integration with smart assistants.

4.3. Timing and Scheduling

The device supports various timing modes to automate operations:

  • Timing Mode: Set specific times for the device to turn on or off.
  • Countdown Mode: Set a countdown timer for automatic power control.
  • Cycle Timing: Schedule repetitive on/off cycles.
  • Inching Switch (Jog Switch): Momentary power control.

Up to 30 sets of timing settings can be configured in the app.

Image demonstrating auto-shift current by timeframe, showing different overload current settings for sleep time, working time, and off-duty time.
Figure 7: Auto-Shift Current by Timeframe for energy efficiency.

4.4. Protection Settings (Adjustable)

You can set various protection parameters via the app to safeguard your electrical system:

  • Under Voltage Protection: Adjustable from 80V-210V (default: 175V).
  • Over Voltage Protection: Adjustable from 120V-300V (default: 275V).
  • Over Current Protection: Adjustable from 1A-63A (default: 63A).
  • Leakage Protection: Adjustable from 10-99mA (default: 50mA). This function can be turned off.
  • Over Temperature Protection: Adjustable from 10-85°C.
  • Reconnection Time (Delay Time): 10s-99s (default: 30s).
  • Overcurrent and Leakage Protection Time: 1-30 seconds (default: 5s). This function can be turned off.
  • Over Current Delay (Adjustable): 1s-15s (default: 1s).
  • Loss of Current Delay (Adjustable): 1s-15s (default: 1s).
Screenshot of the mobile app showing adjustable alarm settings for leakage, high temperature, over-current, over-voltage, and under-voltage.
Figure 8: Adjustable protection settings via the mobile app.

4.5. Electricity Metering and PV Metering

The device provides detailed electricity consumption data. For photovoltaic systems, it can monitor the electricity generation input to the State Grid, viewable by time, day, month, and year in the app.

4.6. Timed Switching Overload Current Test (Video Demonstration)

The following video demonstrates how the device automatically adjusts overload current thresholds based on a schedule, triggering the circuit breaker to activate automatically when thresholds are exceeded.

Video 1: Demonstration of timed switching overload current test and automatic circuit breaker activation.

5. Advanced Features

5.1. Electricity Consumption Data Reset

To clear the electricity consumption data:

  1. Long-press the 'SET' button for 10 seconds. The screen will display "000".
  2. Use the 'Up' and 'Down' buttons (or equivalent on the device/app) to change the display to "111".
  3. Press 'SET' again to save. The electricity consumption data will be cleared.

5.2. Restore Factory Settings

To restore the device to its factory default settings:

  1. Long-press the 'SET' button for 10 seconds. The screen will display "000".
  2. Use the 'Up' and 'Down' buttons (or equivalent on the device/app) to change the display to "222".
  3. Press 'SET' again to save. The device will be restored to factory settings.

6. User Tips

  • Bidirectional Use with PV Panels: This device is bidirectional and can be effectively used in electrical panels where photovoltaic panels are installed, allowing for monitoring of both consumption and generation.
  • Wi-Fi Network: Always ensure your mobile device is connected to a 2.4 GHz Wi-Fi network during the initial setup and pairing process.
  • Protection Customization: Take advantage of the adjustable protection settings in the app to tailor the device's response to your specific electrical environment and connected appliances.

7. Maintenance

  • Regular Cleaning: Keep the device clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
  • Firmware Updates: Periodically check the Tuya Smart/Smart Life app for any available firmware updates to ensure optimal performance and security.
  • Environmental Conditions: Ensure the device operates within its specified environmental conditions (temperature, humidity, altitude) to prevent damage and ensure longevity.
  • Connection Check: Occasionally inspect wiring connections to ensure they are secure and free from corrosion.

8. Troubleshooting

  • Device Not Connecting to Wi-Fi:
    • Ensure your Wi-Fi network is 2.4 GHz.
    • Verify the Wi-Fi password is correct.
    • Make sure the device is in pairing mode (Wi-Fi indicator flashing quickly).
    • Move the device closer to the Wi-Fi router.
  • Inaccurate Readings:
    • Check all wiring connections for proper installation.
    • Ensure the device is correctly configured for your electrical system in the app.
  • Device Tripping Unexpectedly:
    • Review the over-voltage, under-voltage, over-current, and leakage protection settings in the app. They might be set too sensitively.
    • Check for actual electrical faults in your system.
  • Voice Control Not Working:
    • Ensure the device is properly linked to your Amazon Alexa or Google Assistant account through the Tuya Smart/Smart Life app.
    • Verify your smart speaker is connected to the internet.

9. Warranty and Support

For any technical assistance, warranty claims, or support inquiries, please contact the manufacturer directly:

  • Company: Yueqing Wentong Electronic Technology Co., Ltd.
  • Address: No.3 Baite Road, Xiangyang Industrial Zone, Leqing City, Wenzhou City, Zhejiang Province, Mainland China
  • Phone: 086 13587787770
  • Email: wtdzcn@163.com
  • Website: www.rmshebei.com

Please refer to the official user manual PDF for additional detailed instructions and diagrams: User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.