Annke 3K 5MP Outdoor Security Camera Instruction Manual
Model: I51EM/I51EL/I51EN
This manual provides detailed instructions for the installation, operation, and maintenance of your Annke 3K 5MP Outdoor Security Camera. Please read thoroughly before use.
1. Product Overview
The Annke 3K 5MP Outdoor Security Camera is a high-definition IP camera designed for comprehensive video surveillance. It features advanced imaging, intelligent detection capabilities, and robust construction for outdoor use.

Key Features:
- 3K IR Network Camera with 16:9 image scale for optimal display.
- 2.8mm lens for a wider field of view.
- Efficient H.265+ compression technology for reduced storage and bandwidth.
- Motion detection 2.0 with intelligent human & vehicle detection to minimize false alarms.
- Smart Dual-Light technology for advanced night vision with long range.
- Clear day and night vision with 3D DNR (Digital Noise Reduction) and 120DB WDR (Wide Dynamic Range).
- Built-in microphone for real-time audio security.
- Support on-board storage up to 256 GB via microSD/SDHC/SDXC slot.
- IP67 Dust and Waterproof Rating for outdoor durability.
- Supports Power over Ethernet (PoE) and DC12V power options.
2. Package Contents
Please check the package contents upon receipt. If any items are missing or damaged, contact your retailer.

- Cameras (quantity varies by package, e.g., 1 or 4)
- Ethernet Cables (length and quantity vary by package)
- Mounting Screw Bag
- User Manual
- Wall Sticker
Notice: 1Pcs Camera packages may not include Ethernet cables.
3. Setup Instructions
3.1 Installation Location
The camera is designed for ceiling installation and is suitable for both indoor and outdoor environments due to its IP67 rating. Choose a location that provides the desired field of view and is within reach of power and network connections.
3.2 Power and Network Connection
The camera supports two power options: DC 12V or Power over Ethernet (PoE).

- PoE Connection: Connect the camera to a PoE-enabled NVR or PoE switch using a single Ethernet cable. This cable will transmit both power and data.
- DC 12V Connection: If not using PoE, connect a 12V DC power adapter (not always included, check package contents) to the camera's power input, and connect an Ethernet cable to the camera's RJ45 port for network access.
Ensure all connections are secure and weatherproof, especially for outdoor installations.
3.3 Initial Setup and App Connection
Once powered and connected to the network, follow these general steps for initial setup:
- Download the official ANNKE mobile application (available for Android and iOS) from your device's app store.
- Create an account or log in to the app.
- Follow the in-app instructions to add your new camera. This typically involves scanning a QR code on the camera or manually entering its device ID.
- For PC access, install the ANNKE client software on a Windows 7, 8, or 10 operating system.
4. Operating Instructions
4.1 Live View and Recording
Access the live video feed through the mobile app or PC client. You can initiate manual recordings or configure scheduled recordings via the software settings.
4.2 Night Vision Modes
The camera features Smart Dual-Light technology, offering multiple night vision options:
- Color Night Vision: Provides full-color images in low-light conditions up to 66ft (20m) using white light.
- IR Night Vision: Utilizes infrared LEDs for black and white images in complete darkness up to 100ft (30m).
- Human & Vehicle-Triggered Color Mode: The camera remains in IR mode until human or vehicle motion is detected, at which point it switches to color mode and activates white light for clearer identification.

4.3 Motion Detection and Alerts
The camera's Motion Detection 2.0 system intelligently distinguishes between humans and vehicles, significantly reducing false alarms caused by animals, rain, or swaying branches.

When motion is detected, the camera can send instant alerts:
- Email Alerts: Receive email notifications with on-scene snapshots.
- App Push Notifications: Get instant push notifications directly on your mobile device.

4.4 Two-Way Audio
With the built-in microphone, the camera can record audio alongside video, providing an additional layer of security. Check your local laws regarding audio recording.
4.5 Privacy Masking and ROI
You can configure up to 4 programmable polygon privacy masks to block out specific areas within the camera's field of view that you do not wish to monitor. Additionally, a fixed Region of Interest (ROI) can be set for the main stream to focus on critical areas.

4.6 Remote Access
The camera supports remote access, allowing you to view live feeds, recordings, and manage settings from anywhere using the mobile app or PC client.
5. Maintenance
5.1 Storage Management
The camera features a built-in microSD/SDHC/SDXC slot supporting up to 256 GB for local storage. Regularly check the storage status and back up important recordings as needed. You can configure overwrite settings in the camera's software.
5.2 Hardware Reset
If the camera experiences issues, a hardware reset option is available. Refer to the camera's physical location for the reset button (usually a small pinhole) and consult the full user manual for specific instructions on performing a reset.
5.3 Cleaning and Environmental Care
Periodically clean the camera lens and housing with a soft, damp cloth to ensure clear image quality. Avoid using harsh chemicals. The IP67 rating ensures protection against dust and water, but extreme conditions should still be avoided where possible.
6. Troubleshooting
If you encounter issues with your camera, consider the following basic troubleshooting steps:
- No Power: Verify that the power adapter or PoE connection is securely plugged in and providing power. Check power outlets or PoE switch status.
- No Video: Ensure the network cable is properly connected. Check network settings in the app/client. Confirm the camera is online.
- Poor Image Quality: Clean the camera lens. Check for obstructions in the field of view. Ensure sufficient lighting for optimal night vision performance.
- False Motion Alerts: Adjust the sensitivity of motion detection. Configure detection zones and privacy masks to exclude areas with frequent non-threatening movement.
- Cannot Connect to App: Ensure your mobile device has a stable internet connection. Verify the camera is connected to the network. Try restarting the camera and your router.
For more detailed troubleshooting, refer to the comprehensive user manual or contact ANNKE customer support.
7. Specifications
Below are the detailed technical specifications for the Annke 3K 5MP IP Camera:

| Category | Feature | Description |
|---|---|---|
| Camera | Image Sensor | 1/3" Progressive Scan CMOS |
| Max resolution | 3K (3072*1728), 16:9 picture ratio is more suitable for the most popular display | |
| Main Stream | 50 Hz: 20 fps (3072*1728), 25 fps (1920 X 1080, 1280 X 720) 60 Hz: 20 fps (3072*1728), 24 fps (1920 X 1080, 1280 X 720) | |
| Substream | 50 Hz: 25 fps (1280 X 720, 640 X 480, 640 X 360) 60 Hz: 24 fps (1280 X 720, 640 X 480, 640 X 360) | |
| Video Compression | Main stream: H.265+/H.265/H.264+/H.264 Sub-stream: H.265/H.264/MJPEG | |
| Video Bitrate | 32 Kbps - 6 Mbps | |
| Audio Compression | G.711ulaw/G.711alaw/G.722.1/G.726/MP2L2/PCM/AAC | |
| Audio Input | Built-in Microphone, record with audio | |
| Lens | 2.8 mm | |
| Min. Illumination | Color: 0.005 Lux @ (F1.6, AGC ON), B/W: 0 Lux with IR | |
| Angle of View | Horizontal FOV 98°, vertical FOV 54°, diagonal FOV 114° | |
| Supplement Light Type | Smart Dual-Light, IR, White Light | |
| Supplement Light Range | IR: up to 30 m, White Light: up to 20 m | |
| Motion detection 2.0 | Support, include Human & Vehicle detection | |
| Image Enhancement | BLC, HLC, 3D DNR | |
| Wide Dynamic Range | 120 dB WDR | |
| Protocols | TCP/IP, ICMP, DHCP, DNS, HTTP, RTP, RTSP, NTP, IGMP, IPv6, UDP, QoS, FTP, SMTP | |
| API | Open Network Video Interface Version 18.12 | |
| Region of Interest (ROI) | 1 fixed region for main stream | |
| Privacy Mask | 4 programmable polygon privacy masks | |
| General Function | Mirror, rotate, password protection, remote access | |
| Ethernet | 1 RJ45 10 M/100 M self-adaptive Ethernet port | |
| General | Housing | Metal & Plastic |
| Color | White & Black | |
| Storage | Built-in microSD/SDHC/SDXC Slot, up to 256 GB | |
| Hardware Reset | Yes | |
| Operating Power | DC 12 V± 25%, max. 5 W; PoE (802.3af), max. 6.5 W | |
| Operating Temperature | -22 °F – 140 °F (-30 °C – 60 °C) | |
| Indoor/Outdoor Use | Indoor/Outdoor | |
| Interface Protection | IP67 | |
| Dimension (L X W X H) | Ø110 mm × 89.2 mm (Ø4.3" × 3.5") | |
| Weight | Approx. 340 g (0.7 lb.) |
8. User Tips
- For optimal performance, ensure your camera's firmware is always up to date. Check the ANNKE app or website for the latest versions.
- When setting up motion detection zones, consider areas that are critical for security and avoid areas with constant, non-threatening movement (e.g., busy roads, trees swaying in the wind) to reduce unnecessary alerts.
- Regularly review recorded footage and adjust settings as needed to optimize storage usage and alert accuracy.
- Secure your camera's password and enable any available two-factor authentication for your ANNKE account to protect against unauthorized access.
9. Warranty and Support
9.1 Compliance and Legal Disclaimer
⚠️️ Disclaimer: Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
This product is certified with CE and FCC standards, ensuring it meets regulatory requirements for safety and electromagnetic compatibility.
9.2 Security & Privacy
ANNKE is committed to protecting your privacy and personal details. We do not share your personal details with any third parties without your consent and ensure your data is kept safe and secure.
9.3 Customer Support
For technical assistance, warranty claims, or further inquiries, please visit the official ANNKE website or contact their customer support team. Keep your purchase receipt and product model number handy for faster service.