Introduction
Welcome to the iScooter EB1 Electric Bike user manual. This guide provides essential information for the safe operation, maintenance, and troubleshooting of your new electric bike. The iScooter EB1 is designed for efficient and enjoyable urban commuting and recreational riding, combining a robust carbon steel frame with a powerful motor and intelligent features. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.
Safety Information
⚠️ Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
- Always wear a helmet and appropriate safety gear when riding.
- Familiarize yourself with local traffic laws and regulations regarding electric bikes.
- Perform a pre-ride inspection before each use (brakes, tires, battery, lights).
- Do not ride under the influence of alcohol or drugs.
- Avoid riding in adverse weather conditions (heavy rain, snow, ice).
- Ensure the bike is properly folded and secured when transporting.
- Keep hands and feet clear of moving parts.
Product Overview
The iScooter EB1 is a foldable electric bike designed for convenience and performance. Key components include a durable carbon steel frame, 14-inch rubber tires, a 250W motor, and a 36V 7.8Ah lithium battery. It features a smart LCD display for real-time information and front/rear disc brakes for reliable stopping power.

Figure 1: iScooter EB1 Electric Bike highlighting 7.8Ah battery, 500W max power, 25km/h max speed, 30-40km max range, and 14-inch tire size.

Figure 2: Dimensions of the EB1 electric bike, including overall length (120cm), handlebar height (96cm), seat height (83cm/79cm), seat height from ground (87.8cm), recommended rider height (150cm-185cm), and max capacity (150kg).
Video 1: Product demonstration showing the iScooter EB1's folding mechanism, riding, and key features.
Setup
1. Unboxing and Initial Inspection
- Carefully remove the EB1 electric bike from its packaging.
- Check for any visible damage during transit.
- Ensure all components listed in the packing list are present.
2. Unfolding the Bike
- Place the bike on a flat, stable surface.
- Locate the main frame hinge and release the safety latch.
- Carefully unfold the frame until it locks into place. Ensure the latch is securely fastened.
- Unfold the handlebars and secure the stem latch.
- Unfold the pedals.

Figure 3: The iScooter EB1 in its folded state, demonstrating its compact design for storage and transport.
3. Adjusting Seat Height
- Loosen the seat post clamp.
- Adjust the seat to a comfortable height, ensuring your feet can touch the ground when stopped.
- Tighten the seat post clamp securely.
4. Initial Battery Charge
- Before first use, fully charge the battery.
- Connect the charger to the charging port on the bike and then to a power outlet.
- The charging indicator on the charger will show the charging status (usually red for charging, green for full).
- A full charge takes approximately 4-5 hours. Do not overcharge.

Figure 4: The 36V 7.8Ah battery, providing a max range of 40km and requiring 4-5 hours for a full charge.
Operating Instructions
1. Powering On/Off
- To power on, press and hold the power button on the LCD display for a few seconds.
- To power off, press and hold the power button again until the display turns off.
2. Understanding the Smart LCD Display
The intelligent LCD display provides crucial riding information:
- Speed: Real-time speed.
- Battery Level: Current battery charge.
- Speed Level: Current assist level (0-3).
- Headlight Indicator: Shows if the headlight is on.
- Brake Applied: Indicates when brakes are engaged.
- Cruise Control: Indicator for cruise control activation.

Figure 5: Smart LCD Instrumentation displaying cruise control, battery level, real-time speed, headlight, speed level, and brake applied indicators.
3. Selecting Speed Modes
The EB1 offers three-speed modes (10KM/H, 15KM/H, 25KM/H) plus a default '0' mode. Use the '+' and '-' buttons on the LCD display to cycle through the assist levels. The '0' mode means no electric assist, functioning as a regular bicycle.
4. Using Lights
The EB1 is equipped with a bright front light and a warning rear light for enhanced safety, especially during night riding or low-light conditions. Activate the lights via the control panel on the handlebar.

Figure 6: The EB1's bright front light and warning rear light for safer night riding.
5. Braking
The EB1 features front and rear disc brakes for reliable stopping power. Apply both brakes gently and evenly to slow down or stop. Avoid sudden, hard braking, especially at high speeds, to prevent skidding.

Figure 7: Front and rear disc brakes provide exceptional stopping power.
Maintenance
1. Cleaning
- Wipe the bike with a damp cloth after each ride.
- Avoid using high-pressure water jets directly on electrical components.
- Do not use abrasive cleaners or solvents.
2. Battery Care
- Charge the battery regularly, even if not in use, to maintain its lifespan.
- Store the bike and battery in a cool, dry place away from direct sunlight and extreme temperatures.
- Do not attempt to open or repair the battery pack.
3. Tire Pressure
- Check tire pressure before each ride.
- Maintain recommended tire pressure for optimal performance and safety.
- Refer to the tire sidewall for recommended PSI/BAR.
4. Brake Inspection
- Regularly check brake pads for wear and replace if necessary.
- Ensure brake levers are responsive and provide adequate stopping power.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike does not power on | Low battery; Loose battery connection; Faulty power button | Charge battery; Check battery connection; Contact support |
| Motor not assisting | Assist level set to '0'; Sensor issue; Motor fault | Increase assist level; Check connections; Contact support |
| Brakes feel weak | Worn brake pads; Loose brake cable; Air in hydraulic system (if applicable) | Replace pads; Adjust cable tension; Consult a bike mechanic |
| Unusual noises during ride | Loose components; Chain issues; Motor issue | Inspect all bolts and connections; Lubricate chain; Contact support |
Specifications
| Feature | Detail |
|---|---|
| Model Number | EB1 |
| Brand Name | iScooter |
| Certification | CE |
| Frame Material | Carbon Steel |
| Wheel Size | 14 Inches (350mm) |
| Motor Wattage | 250W (500W Peak) |
| Motor Type | Brushless |
| Battery Type | Lithium Battery |
| Battery Voltage | 36V |
| Battery Capacity | 7.8Ah |
| Charging Time | 4-5 Hours |
| Max Speed | 25 KM/H (15.5 MPH) |
| Range per Charge | 30-40 KM (depending on conditions) |
| Max Climbing Ability | 15° Incline |
| Max Load Capacity | 150 KG (330 LBS) |
| Rated Passenger Capacity | One Seat |
| Folded | Yes |
| Display | Intelligent LCD Display |
| Brakes | Front and Rear Disc Brakes |
| Lighting | Front External Light & Rear Built-in Light |
| Recommended Rider Height | 150cm-185cm |

Figure 8: The 250W motor (500W peak) provides power for speeds up to 25km/h and climbing inclines up to 15°.
User Tips
- Steep Climbs: The EB1 is capable of handling steep climbs up to a 15° incline. For optimal performance on very steep hills, consider using a lower assist mode or providing some pedal power.
- Battery Longevity: To maximize battery life, avoid completely draining the battery frequently. Charge it after each significant ride, and if storing for an extended period, ensure it has at least a 50% charge.
- Folding for Transport: Practice folding and unfolding the bike a few times to become proficient. This will make it quicker and easier to store in a car trunk or carry onto public transport.
Warranty & Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for warranty claims.