ELP 1080P Waterproof Day Night Vision USB Dome Camera

Introduction

This manual provides detailed instructions for the ELP 1080P Waterproof Day Night Vision USB Dome Camera. This camera is designed for both indoor and outdoor surveillance, offering high-speed recording, robust waterproof protection, and enhanced night vision capabilities. Please read this manual thoroughly before operating the device to ensure proper usage and optimal performance.

Key Features

• High-Speed Recording: Achieves up to 100 frames per second (FPS) for sharp and smooth video capture.
• Durable Construction: Features an aluminum dome case with an IP66 waterproof rating, suitable for various indoor and outdoor environments.
• Advanced Night Vision: Equipped with 24pcs Infrared (IR) LEDs and an IR Cut filter for superior day and night vision. Smart IR mode automatically adjusts based on light conditions.
• Extended IR Range: Provides an 80ft/25m IR range, allowing for clear capture in low-light conditions.
• Lens Options: Available with standard 3.6mm lens, with options for 6mm and 8mm lenses to suit different field of view requirements.
• Plug & Play Connectivity: High-speed USB 2.0 interface ensures easy setup with any PC.
• Wide Compatibility: UVC compliant, supporting Windows, Linux, and Android operating systems.
• OTG Support: Compatible with USB2.0 OTG Protocol, enabling use as an external camera for mobile phones, tablets, and other OTG-supported devices.
• Versatile Applications: Ideal for machinery equipment, simple security systems, teaching systems, exam systems, driving learning systems, industrial cameras, micro HD surveillance, and bus surveillance.

Package Contents

• 1 x ELP 1080P USB Dome Webcam
• 1 x 5m USB Cable (other lengths may be optional)
• 1 x User Manual

Setup

1. Physical Installation

The camera is designed for flexible installation indoors or outdoors. Follow these steps to mount the camera:

1. Hold down the camera body firmly.
2. Gently loosen the base by rotating it counter-clockwise.
3. Continue to loosen the base until it can be separated from the camera body.
4. Take off the base.
5. Position the base at the desired mounting location and secure it using screws.
6. Reattach the camera body to the fixed base by aligning and tightening it clockwise.
7. Ensure the camera is securely mounted and the cable is routed appropriately.

2. Connecting the Camera

1. Locate an available USB port on your computer or compatible device.
2. Plug the camera's USB cable into the USB port. The camera is plug-and-play and typically does not require additional drivers for supported operating systems.
3. For mobile phones or tablets, ensure your device supports USB2.0 OTG Protocol and use an appropriate OTG cable if necessary.

Operating Instructions

1. Once connected, open your preferred camera software or application on your computer/device.
2. Select the ELP USB Dome Camera as the video input source within the software settings.
3. The camera will automatically adjust between day and night vision modes using its Smart IR feature.
4. Adjust any desired image parameters (Brightness, Contrast, Saturation, Hue, Sharpness, Gamma, White balance, Backlight Contrast, Exposure) through your camera software if supported.

Product overview and demonstration video.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the camera lens and body. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the camera. Avoid abrasive cleaners.
• Environmental Protection: The IP66 rating ensures protection against dust and powerful water jets. However, avoid submerging the camera in water.
• Cable Management: Ensure the USB cable is not kinked, pinched, or exposed to excessive tension, which could damage the cable or connection.

Troubleshooting

• Camera Not Detected:
  • Ensure the USB cable is securely connected to both the camera and the computer/device.
  • Try a different USB port.
  • Restart your computer/device.
  • Verify that your operating system (Windows, Linux, Android) is compatible and up-to-date.
  • Check if your device allows external USB devices to access the camera.
• No Image/Poor Image Quality:
  • Ensure sufficient lighting in the environment.
  • Clean the camera lens if it appears dirty or smudged.
  • Check camera software settings for resolution and frame rate.
  • Verify that the correct camera is selected as the video input in your software.
• Night Vision Not Working:
  • Ensure the environment is dark enough for the IR LEDs to activate automatically.
  • Check for any obstructions blocking the IR LEDs.

Specifications

User Tips

• For optimal performance, ensure your device's USB port is USB 2.0 or higher.
• When using with Android devices, confirm that the device's operating system is Android 4.0 or above and supports UVC.
• Experiment with different camera software applications to find one that best suits your needs for recording and image adjustments.
• Regularly check the camera's field of view to ensure it covers the desired surveillance area, especially after installation or adjustments.

Warranty & Support

This product is manufactured by Shenzhen Ailipu Technology Co., Ltd. For technical support or warranty inquiries, please refer to the contact information provided with your purchase documentation or visit the manufacturer's official website.

Certifications

The ELP 1080P Waterproof Day Night Vision USB Dome Camera complies with the following certifications:

• CE
• FCC
• RoHS