1. Introduction
This manual provides detailed instructions for installing and operating your CARABC Wireless Carplay Android Auto Interface. This device enhances your driving experience by integrating smartphone functionalities like navigation, music, and voice control directly into your vehicle's existing display. It supports both Apple CarPlay and Android Auto, offering a seamless and intuitive interface.
2. Compatibility Check
Before installation, it is crucial to confirm compatibility with your vehicle's multimedia system. This device is designed for Peugeot and Citroen vehicles equipped with SMEG, MRN, or NAC systems.
To check your system version:
- Select the fourth key on the left of the Vehicle.
- Select the knob in the top right corner.
- Select Options.
- Select System Settings.
- Select System Information.
- Select View to see the system details.
- Select either Software or Map on this screen to view the version date.
Example System Information Screens:


3. Specifications
| Feature | Specification |
|---|---|
| Chip | SPHE8368-U |
| Main Frequency | 800MHz |
| RAM/ROM | 128MB/256MB |
| OS | Linux Gemini |
| Support Audio Format | MP3, WMA, AAC, FLAC, WAV |
| Support Video Format | AVI, MKV, MP4, FLV, MPEG, H.264 |
| Dimension | 140mm*105mm*25mm |
| Working Environment Temperature | -40°C~+85°C |
| Storage Environment Temperature | -40°C~+100°C |
| Storage Temperature | 30%~90% |
| Working Humidity | 45%~80% |
| Working Height | Device can work normally under 15000 feet (4573 meters) height |
| Drop Test | Device can work normally after dropping under 30 inches (76cm) height |
| Rating Voltage | 5V |
| Normal Working Voltage | DC 5V(±0.3V) |
| Standby Current | ≤1mA |
| Video Output | CVBS/RGB888/LVDS |
| Video Output Voltage | 1.0Vpp/75Ω |
| Audio Output | Two-channel CD stereophonic sound, can extend |
| Audio Watt | Two channel 0.25W/CHANNEL |
| Voice Input | MIC analog signal |
| Communication Serial Port | 1 group UART port |
| Touch Way | IIC/serial communication |
| General IO | Multiplex IO, meet different customer demand |
| USB Port | 1 group |
| Bluetooth | |
| Bluetooth Standard | Bluetooth V2.1+EDR |
| Frequency Band | 2402MHz-2480MHz |
| Interface | UART |
| Size | 12*15mm |
| Vcc | 3.3V |
| ANT | External antenna interface |
| WIFI | |
| Frequency Band | 2.4GHz&5.8GHz |
| Interface | USB |
| Size | 12*13mm |
| Vcc | 3.3V |
| ANT | External antenna interface |
4. Product Accessories List





5. Installation Guide
The installation process involves disassembling parts of your car's dashboard to access the original car host and connect the interface module. It is recommended to watch the official installation video for a visual guide.
5.1 Installation Video
Installation demonstration for Peugeot 508.
5.2 Wiring Diagram

- Connect the Original Car Power.
- Connect the plug of the Original Car Power Cable.
- Connect the Original Car Host Video Port.
- Connect the Original Car Video Cable.
- WiFi Antenna.
- USB port.
- Aftermarket CAM power supply.
- MT Reversing Detection Line.
- Aftermarket Rear Camera Port.
- Aftermarket Front Camera Port.
5.3 General Installation Steps (Peugeot 508 Example)
- Prepare Components: Gather the host module and all accessories as shown in the wiring diagram.
- Pry Open Air-conditioning Panel: Carefully pry open the air-conditioning panel to access the car's internal components.
- Remove Original Car Host: Unscrew the necessary screws and gently remove the original car host unit.
- Transfer Connections: Transfer the original car host power and LVDS port connections to the new interface.
6. Operating Instructions
6.1 First Connection Operation (Wireless Apple CarPlay)
- Access the “Wireless CarPlay Settings” (P1) on the car display.
- Click “Discover and Connect Devices”. A pop-up (P2) will appear, showing “CX_BT…”.
- On your iPhone, open Bluetooth settings and search for “CX_BT…”.
- Click to connect and confirm any pairing requests.
- Once connected, Wireless CarPlay will successfully launch.



Note: To connect Wireless CarPlay, ensure your Apple device is paired via Bluetooth and has WiFi enabled. Once set up, the vehicle will automatically reconnect to previously paired devices upon startup. Remember to keep both WiFi and Bluetooth on during the connection process.
6.2 First Connection Operation (Wireless Android Auto)
- Enter the installation Settings interface, then navigate to “Wireless Android Auto Settings” (P1).
- Click the pair of “CX_BT…” (P2).
- Use your Android mobile phone's Bluetooth to connect to “CX_BT…”.
- After successful pairing, the Android Auto interface (P3) will automatically appear.



Note: To connect Wireless Android Auto, ensure your Android device is paired via Bluetooth and has WiFi enabled. Once set up, the vehicle will automatically reconnect to previously paired devices upon startup. Remember to keep both WiFi and Bluetooth on during the connection process.
6.3 Function Operation Description
The CARABC interface supports a variety of functions:
- Wired/wireless CarPlay and Android Auto.
- Screen mirroring for Apple and Android devices.
- USB multimedia player supporting lossless audio, 720p video, and image playback.
- Supports original/aftermarket vehicle rear view (CVBS/AHD), front view (with adjustable delay), and DVR.
- Supports adding 360° panoramic view (CVBS/AHD).
- Original vehicle microphone support (reserved for installation), with automatic echo cancellation for calls.
- Original vehicle Bluetooth calling function.
- AUX input function, expandable to digital TV.
- Wired Baidu CarLife support (requires factory settings to enable, password: 0301).


6.4 Screen Mirroring
For Apple Devices (P1 & P2):
- Click on the Mirroring icon.
- Connect your Apple device using a USB cable.
- A prompt will appear on your phone. Tap "Trust" to access the screen mirroring interface.
For Android Devices (P1 & P3):
- On the Mirroring screen, connect your Android device.
- Download and install "Auto link" from the prompt (or directly from the app store).
- Confirm the USB connection. The Mirroring interface will appear upon successful connection.
Please note: CarPlay and AirPlay functions cannot be used at the same time!
6.5 USB Media Playback
Inserting a USB drive will automatically switch to the USB playback interface, supporting lossless audio and 720P video playback.
6.6 Common CarPlay System Function Settings
Audio Settings: Adjust main volume, navigation volume, in-call volume, ringer volume, and voice assistant volume. It is recommended to use the default values.
Advanced Features: Configure park distance control, aftermarket/original camera settings, rear camera/360 panoramic view, AHD camera type, factory USB switch, and front-view display time. If installing an AHD camera, select the corresponding frame rate.
UI Settings: Adjust driver position and wallpaper.
6.7 Explanation of Original Vehicle Buttons and Dip Switches
The interface integrates with your vehicle's existing controls:
- Peugeot 308 & 408: Short press to switch between original car and aftermarket interfaces. All other functions are controlled via the original car screen touch operation.
- CarPlay Music Control: Use the car's buttons for music playback (up and down function).
- CarPlay Call Control: Use the car's buttons for call connection and hang up.
- Switch AUX Channel: Press the "Source" key twice to switch to the AUX channel in the original car interface.
- Switch Interface & Wake Siri: Long press the "LIST" key to switch the interface and short press to wake up Siri.

7. Maintenance
To ensure the longevity and optimal performance of your CARABC interface, follow these general maintenance guidelines:
- Keep the device and surrounding area clean and free from dust and debris.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
- Ensure all cable connections are secure and free from damage.
- Do not attempt to open or modify the device, as this may void the warranty and cause damage.
8. Troubleshooting
- CarPlay screen goes black or flickers: Check if the LVDS cable is properly connected to eliminate poor LVDS contact issues.
- Original car's sound is normal, but no sound in CarPlay:
- For iPhone (CarPlay): Play music on CarPlay (not on your phone or original car). Adjust the volume to medium or high. Switch to the original car's radio/media, choose "AUX", then switch back to CarPlay.
- For Android (Android Auto): Refer to the video link for guidance: https://youtu.be/IhfCPWj6L0M (09:40-10:35).
- Echo outside the car during calls: Select the "echo cancellation method" in Audio Settings to eliminate it. Adjust the original car's volume to 50-70 for best results.
- No sound in CarPlay music or calls: This might be due to the phone having an automatic connection with the original car Bluetooth. Clear all devices from your phone's Bluetooth, then re-pair the module with your phone.
- CarPlay connected, sound is normal but the screen is black: Turn off your phone's Wi-Fi and Bluetooth to see if the CarPlay interface displays correctly. If the issue persists, long press the "LIST" button of the original car for 10 seconds to restart the CarPlay system.
- CarPlay music stutters or navigation without refresh: Check if the network on your phone is functioning properly and ensure the WIFI antenna is tightened. Keep the Wi-Fi antenna away from all metal objects, including other modules.
- CarPlay could not connect automatically: Check if both phone Bluetooth and Wi-Fi are turned on. If they are already on, click the iOS button to reconnect.
- No response when engaging reverse gear:
- If your car is manual with an original camera, set it up first in Advanced Features (P1).
- If your car is manual with an aftermarket camera, perform all the above steps.
- If your car is automatic gear, set it up as per the actual situation.

P1: Advanced Features for Camera Settings - If camera still not working: Connect the brown cable with your camera (most cameras are installed in the tail lights). If the cable is not long enough, an extension cable may be needed.
9. System Upgrade
To upgrade the system, follow these steps:
- Prepare USB Device: Copy the upgrade files (ISPBOOOT.BIN and OSU_SETTITINGS folder or Update file) to the root directory of a USB disk.
- Access System Information: On the device, navigate to "Settings" > "Version Information" > "About Device" to view the current system version (P1, P2).
- Initiate Upgrade: Insert the USB into the device. Return to the main interface, then go to "Settings" > "Version Information" > "About Device" > "Update". Click the corresponding file to start the upgrade.



Important: The upgrade process cannot be powered off. Ensure the USB disk file name is correct and verify the version information before proceeding with the upgrade. The USB will be automatically read after the upgrade is completed.
10. User Tips
- Always verify your car's multimedia system version (SMEG, MRN, or NAC) before purchasing or installing to ensure compatibility.
- For optimal audio quality, ensure your car's AUX input is selected when using CarPlay/Android Auto.
- If experiencing connectivity issues, try restarting both your phone's Bluetooth/Wi-Fi and the CarPlay system by long-pressing the 'LIST' button for 10 seconds.
11. Warranty and Support
Your CARABC Wireless Carplay Android Auto Interface comes with a 1-year guarantee. We offer 24+ hours after-sales service, exclusive support, and free updates to ensure your satisfaction.
For further assistance, you can refer to the detailed user manual in PDF format: User manual (PDF).