UGREEN PB761

Contents

UGREEN PB761 Magnetic Wireless Power Bank User Manual

Model: PB761

Introduction

Thank you for choosing the UGREEN PB761 Magnetic Wireless Power Bank. This device is designed to provide convenient and fast charging for your mobile devices, featuring Qi2 official certification for magnetic wireless charging and 30W bidirectional wired fast charging. This manual will guide you through the setup, operation, and maintenance of your power bank.

Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in fire, electric shock, explosion, or other hazards.

  • Do not expose the power bank to extreme temperatures (above 45°C or below 0°C).
  • Do not disassemble, modify, or repair the device yourself.
  • Keep the power bank away from water, moisture, and flammable materials.
  • Avoid dropping or subjecting the device to strong impacts.
  • Use only certified charging cables and adapters.
  • Keep out of reach of children.

The UGREEN PB761 incorporates multiple security protections to ensure safe operation:

Icons representing various safety protections: Overcharge, Over-release, Overvoltage, Undervoltage, Overcurrent, Over power, Temperature, Short circuit protection.

Multiple security protections including overcharge, over-release, overvoltage, undervoltage, overcurrent, overpower, temperature, and short circuit protection.

Product Features

  • Qi2 Official Certification: Supports 15W wireless fast charging with official magnetic animation for compatible devices.
  • 30W Bidirectional Wired Fast Charging: Rapid charging for both the power bank and connected devices via USB-C.
  • Strong Magnetic Adsorption: Equipped with 16 N52 high-strength magnets and non-slip silicone for stable attachment.
  • High Capacity: Available in 10000mAh (PB761) and 5000mAh (PB762) variants.
  • Advanced Temperature Control: Features high-performance graphene materials, ThermalGuard™ self-developed temperature control technology, and intelligent power regulation for safe and efficient charging.
  • Broad Compatibility: Supports wireless magnetic charging for Apple iPhone 12-16 series and wired charging for various Apple and Android devices (Huawei, Xiaomi, Samsung, OPPO, VIVO). Includes a small current mode for trickle charging small devices like Bluetooth headsets and fans.
  • Portable Design: Compact and lightweight, suitable for travel and approved for use on planes and high-speed rail.
Diagram showing key features: Qi2 official certification, 30W bidirectional wired fast charging, 10000mAh capacity, strong magnetic adsorption, triple temperature control, and multi-compatibility.

Overview of the UGREEN PB761's key features.

Comparison table of Qi, Qi2 magnetic charging, and MagSafe, highlighting Qi2's 15W MAX output and official certification.

Qi2 official certification ensures 15W fast charging and compatibility with official magnetic animations.

Setup

  1. Initial Charge: Before first use, fully charge your UGREEN PB761 power bank using a USB-C cable and a compatible power adapter. The lamp indicators will show the charging progress.
  2. Check Battery Level: Briefly press the power button to see the current battery level indicated by the LED lamps.
Diagram showing how to turn off/on wireless charging mode and the lamp indicators for battery quantity.

Lamp indicators show the electric quantity: 0-25%, 26-50%, 51-75%, 76-100%.

Operating Instructions

Wireless Magnetic Charging

  1. Ensure your phone supports magnetic wireless charging (e.g., Apple iPhone 12-16 series).
  2. Align the UGREEN PB761 with the back of your phone. The strong magnets will snap it into place.
  3. Wireless charging will begin automatically. For compatible iPhones, an official charging animation will be displayed.
A hand holding an iPhone with the UGREEN PB761 magnetically attached to the back, demonstrating stable connection.

The strong magnetic core and anti-slip silicone ensure stable attachment.

Wired Charging

  1. Connect your device to the USB-C port on the UGREEN PB761 using a compatible USB-C to USB-C or USB-C to Lightning cable.
  2. The power bank will automatically detect and begin charging your device at up to 30W.

Small Current Mode

For charging low-power devices like Bluetooth earbuds or smartwatches, the power bank features a small current mode. This mode is typically activated automatically when a low-power device is connected, providing a safe and optimized charge.

Controlling Wireless Charging

  • Turn off wireless charging mode: Triple-hit the power key.
  • Re-open wireless charging: Click the power key once.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the surface of the power bank. Do not use liquid cleaners or abrasive materials.
  • Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the power bank frequently. Recharge it regularly, even if not in use.

Troubleshooting

  • Power bank not charging: Ensure the USB-C cable and power adapter are properly connected and functional. Try a different cable or adapter.
  • Device not charging wirelessly: Ensure your device supports magnetic wireless charging and is correctly aligned with the power bank. Check if wireless charging mode is active (click power key). Remove any thick phone cases that might interfere with magnetic connection or wireless charging.
  • Slow charging: Ensure both the power bank and your device support fast charging protocols. Use a high-quality, fast-charging compatible cable.
  • LED indicators not working: If the power bank is unresponsive, try fully charging it. If the issue persists, contact customer support.

Specifications

Product Parameters table for UGREEN PB761 10000mAh model.

Specifications for the 10000mAh UGREEN PB761 model.

Product Parameters table for UGREEN PB762 5000mAh model.

Specifications for the 5000mAh UGREEN PB762 model.

UGREEN PB761 Product Parameters
FeaturePB761 (10000mAh)PB762 (5000mAh)
ModelPB761 (Note: PB762 is the 5000mAh variant)
Battery Power10000mAh (2x5000mAh)5000mAh (18Wh)
Rated Capacity6000mAh (TYP 5V 2.4A)2800mAh (TYP 5V 2.4A)
Material QualitySilicone PC ABS
USB-C Input5V=3A, 9V=3A, 12V=2.5A, 15V=2A5V=3A, 9V=2A
USB-C Output5V=2.4A, 5V=3A, 9V=3A, 12V=2.5A, 15V=2A5V=2.4A, 5V=3A, 9V=2.22A
Wireless Output15W Max
Product Size105 x 69 x 20mm105 x 69 x 16mm
Product Weight217gAbout 156g
Shell MaterialPlastic
Battery TypeLi-Polymer Battery
TypeMagnetic power bank

User Tips

  • Optimal Magnetic Connection: For the most stable magnetic attachment, it is recommended to use the power bank with a MagSafe-compatible phone case or directly on a bare MagSafe-enabled phone.
  • Check Qi2 Certification: To verify genuine Qi2 certification and enable official charging animations, ensure your iPhone 13-15 series is updated to iOS 17.2 or above, and iPhone 12 series to iOS 17.4 or above.
  • Fast Charging Performance: To achieve the advertised fast charging speeds, use a power adapter and cable that support the appropriate power delivery (PD) standards for 30W wired charging.
Image showing how to verify Qi2 certification through the Qi2 logo, a physical certificate, and the official charging animation on an iPhone.

Verify Qi2 certification for optimal performance and features.

Warranty and Support

The UGREEN PB761 Magnetic Wireless Power Bank comes with a one-year repair warranty. For technical support, troubleshooting assistance, or warranty claims, please contact the seller or UGREEN customer service through their official channels.

Certifications including CE, UKCA, FCC, PSE, and UL Report, indicating trusted quality and authority detection.

The product holds various international certifications, ensuring quality and safety.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.