1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Diatone Mamba Stack. The stack comprises a SpeedyBee APP (WiFi) F722 F7 MK1 Flight Controller (FC) and an F50 50A BLHeli_32 4-in-1 Electronic Speed Controller (ESC). Designed for high-performance FPV drone applications, this 32-bit stack offers robust power delivery and convenient wireless configuration via the SpeedyBee App.
2. Product Overview
The Diatone Mamba Stack is engineered for demanding FPV setups, combining a powerful F722 flight controller with a high-current 50A 4-in-1 ESC. Key features include:
- Integrated WiFi Module: Enables wireless configuration and firmware updates via the SpeedyBee App, eliminating the need for a PC connection in the field.
- High-Performance F722 MCU: Provides ample processing power for advanced flight algorithms and features.
- Robust 50A ESC: Capable of handling high current demands for powerful motors, with BLHeli_32 firmware for precise motor control.
- Compact Design: Standard 30.5x30.5mm mounting pattern for easy integration into most FPV frames.
- Comprehensive Connectivity: Multiple UARTs, OSD, Blackbox, and TVS protection for a complete FPV system.

3. Specifications
3.1. MAMBA APP F722 MK1 Flight Controller
| Feature | Specification |
|---|---|
| MCU | 216MHz STM32F722RET6 32BIT |
| IMU | MPU6000 |
| OSD | BF OSD |
| Blackbox | 16M Flash Memory |
| Uarts | 6 Set |
| ESC Telemetry | RX6 |
| WIFI | SpeedyBee APP |
| Input Voltage | 3~6S Lipo (12.6~25V) |
| BEC | 5V 2.5A & 9V 2A (Max 3A) |
| LED Indicator | Blue&Orange (FC Status), Green (9V), White (5V), Red (3.3V) |
| LED Controller | BF LED/MB LED (4 Set 2812 LED) |
| TVS Protection | Yes |
| Smart Audio | Yes |
| Barometer | No |
| Buzzer Support | Yes |
| Mounting | 30.5mm/M3 |
| Weight | 9g |
3.2. F50 50A 3-6S 4-in-1 ESC
| Feature | Specification |
|---|---|
| Input Voltage | 3~6S Lipo (12.6V~25V) |
| Continuous Current | 50A×4 |
| Burst Current | 60A (10S) |
| ESC Software | Dshot300/600/1200 |
| Supply Capacitor | Panasonic High-Frequency 470uF/35V |
| BEC | No |
| Mounting | 30.5×30.5mm, M3 |
| Weight | 22g |
4. Setup and Installation
Careful installation is crucial for the performance and longevity of your Mamba Stack. Always ensure your drone is disconnected from any power source before beginning installation.
4.1. Unboxing and Inspection
Upon receiving your Mamba Stack, carefully unbox all components. The package typically includes the F722 MK1 FC, F50 50A ESC, mounting hardware (standoffs, grommets), and a wiring harness.

4.2. Mounting the Stack
- Mount the F50 50A ESC to your drone frame using the provided M3 mounting hardware (grommets and standoffs). Ensure the ESC is oriented correctly, typically with the battery pads facing the rear.
- Carefully place the F722 MK1 FC on top of the ESC, aligning the mounting holes. Use the remaining mounting hardware to secure the FC. Ensure there is no shorting between the boards or frame.
- The mounting pattern is 30.5x30.5mm.
4.3. Wiring Connections
Refer to the detailed pinout diagrams for precise connections. The following are general guidelines:


- ESC to FC: Connect the provided wiring harness between the FC and ESC. This typically includes motor signals, telemetry, and power.
- Battery: Solder your main battery lead (XT60/XT30) to the large BAT+/BAT- pads on the ESC. Ensure correct polarity.
- Motors: Solder your motor wires to the corresponding motor pads (M1, M2, M3, M4) on the ESC.
- Receiver (RX): Connect your receiver to an available UART on the FC (e.g., SBUS, CRSF, iBUS). Refer to the FC pinout for specific RX pads and UART numbers.
- Video Transmitter (VTX): Connect VTX power (e.g., 9V or 5V from BEC), ground, video signal, and Smart Audio (if supported) to the appropriate pads on the FC.
- Camera: Connect camera power (e.g., 5V), ground, and video signal to the CAM pads on the FC.
- GPS/Other Peripherals: Connect to remaining available UARTs or I2C pads as needed.
- LEDs: The FC supports 4 sets of 2812 LEDs. Connect external LED strips to the designated LED pads.
4.4. Software Configuration (Betaflight / SpeedyBee App)
- Initial Connection: Connect the FC to your computer via the USB-C port.
- Betaflight Configurator: Open Betaflight Configurator (available for download from the Betaflight GitHub page). Ensure you have the correct DFU drivers installed.
- Firmware Flash: It is recommended to flash the latest stable Betaflight firmware for the F722 target. Backup your current configuration before flashing.
- Basic Configuration: Configure your receiver, motors, OSD, and other peripherals in Betaflight.
- SpeedyBee App (WiFi): Once Betaflight is configured, you can connect to the FC wirelessly using the SpeedyBee App on your smartphone. This allows for convenient field tuning and adjustments. The FC's WiFi module enables this connection.
- ESC Configuration: The F50 ESC uses BLHeli_32 firmware. You can configure ESC settings (e.g., motor direction, Dshot protocol) via Betaflight passthrough or using the BLHeli_32 Suite.
5. Operating Instructions
5.1. Powering On
Connect a compatible 3-6S LiPo battery (12.6V~25V) to the ESC's main battery pads. The FC will power on, and the LED indicators will illuminate:
- Blue & Orange: FC Status
- Green: 9V power output
- White: 5V power output
- Red: 3.3V power output
5.2. Flight Controller Operation
Once powered, the flight controller will initialize. Ensure all sensors (gyro, accelerometer) are calibrated in Betaflight. Arming the drone should only be done in a safe environment after verifying all controls and motor directions.
5.3. SpeedyBee App Usage
The integrated WiFi module allows for wireless configuration. Download the SpeedyBee App to your smartphone. Connect to the FC's WiFi network (SSID and password can be found in Betaflight or SpeedyBee documentation). The app provides a user-friendly interface for adjusting PID tunes, rates, OSD settings, and more, without needing a computer.
6. Maintenance
- Regular Inspection: Periodically inspect the FC and ESC for any signs of physical damage, loose connections, or solder joint issues.
- Cleaning: Keep the boards clean from dust, dirt, and debris. Use compressed air or a soft brush. Avoid using liquids directly on the electronics.
- Firmware Updates: Regularly check for and update to the latest Betaflight and BLHeli_32 firmware versions to benefit from bug fixes and new features. Always back up your configuration before updating.
- Heat Management: Ensure adequate airflow around the stack, especially the ESC, to prevent overheating during operation.
7. Troubleshooting
If you encounter issues, consider the following:
- No Power: Check battery connection polarity and ensure the battery is charged. Inspect for any visible shorts on the board.
- No USB Connection: Ensure correct DFU drivers are installed on your computer. Try a different USB-C cable.
- Motors Not Spinning: Verify motor connections, motor direction in BLHeli_32 Suite, and ESC protocol settings in Betaflight. Ensure the drone is armed correctly.
- Unstable Flight: Check PID tunes, sensor calibration, and ensure the FC is soft-mounted to reduce vibrations.
- WiFi Connection Issues: Ensure the FC is powered on. Check the SpeedyBee App for connection instructions and ensure no other devices are interfering with the WiFi signal.
- OSD Not Displaying: Verify OSD settings in Betaflight and ensure video signal connections are correct.
For more in-depth troubleshooting, consult the Betaflight documentation, BLHeli_32 documentation, and online FPV community forums.
8. User Tips
- Always perform a dry run (without propellers) after any configuration changes to verify motor direction and functionality.
- Utilize the Blackbox feature to log flight data, which can be invaluable for diagnosing performance issues and tuning.
- Take advantage of the SpeedyBee App's wireless capabilities for quick adjustments at the flying field.
- Consider conformal coating the stack for added protection against moisture and debris, especially if flying in adverse conditions.
9. Warranty and Support
For warranty claims or technical support, please contact your point of purchase or the manufacturer directly. Retain your proof of purchase for warranty validation. Specific warranty terms and conditions may vary by region and retailer.