1. Product Overview
The ComXim MT200RL is a versatile motorized rotating display stand designed for product photography, 3D scanning, live streaming, and general product display. It features remote control operation, allowing for precise adjustments of rotation speed, direction, and angle, along with various rotation modes.
2. Package Contents
- MT200RL Rotating Display Stand
- Remote Control
- Power Adapter
- User Manual (this document)
3. Setup Instructions
- **Unpack**: Carefully remove all components from the packaging.
- **Placement**: Place the rotating display stand on a stable, flat surface. Ensure there is enough clearance around the turntable for the items you intend to display.
- **Power Connection**: Locate the power interface on the side of the turntable. Connect the provided power adapter to the turntable's power interface and then plug the adapter into a suitable power outlet.
- **Power On**: Flip the red power switch on the side of the turntable to the 'ON' position. The turntable is now ready for operation.
4. Operating Instructions
The MT200RL turntable is controlled via the included 31-key remote control. Ensure the remote has batteries installed and is pointed towards the turntable's infrared signal receiver for optimal communication.
4.1 Remote Control Functions
- **Lock Button**: Press to lock the current settings. Prevents accidental operations.
- **Set Origin**: Sets the current position as the origin point. Used in conjunction with "Return to Origin".
- **Return to Origin**: Returns the turntable to the previously set origin point.
- **Set Angle Buttons (0.1°, 0.5°, 1/64, 1/48, 1/32, 1/16, 1/8, 1/4)**: Specifies the angle for a single rotation in Single-Step Mode or the step angle in Repeated Step Mode.
- **Speed Up/Down (+/-)**: Adjusts the turntable's rotation speed.
- **Clockwise/Counterclockwise Direction**: Switches the turntable's rotation direction.
- **Start/Stop**: Starts or stops the turntable's rotation.
- **Continuous Rotation Mode**: Switches to continuous rotation. The turntable rotates continuously at a set angle and speed until manually stopped or another mode is activated.
- **Single-Step Mode**: The turntable rotates at a set angle and speed, then stops.
- **Repeated Step Mode (Intermittent Rotation)**: The turntable rotates by a set angle, pauses for 3-4 seconds, and then repeats the action, continuously cycling until manually stopped or another mode is activated.
- **Multi-step Within One Circle Mode**: The turntable rotates by a set angle, pauses, and then repeats the action until it completes a full 360-degree rotation and returns to the starting position. The angle buttons (2, 4, 8, 16, 24, 32, 48, 64, 96) divide 360 degrees into equal steps.
- **Trigger Auto Focus/Shutter Photo Capture/Auto Focus + Shutter**: These functions are available only on turntables that support auto-shutter functionality (e.g., for DSLR cameras).
4.2 Rotation Modes Explained
- **Continuous Rotation Mode**: The turntable rotates continuously at a set angle and speed until manually stopped or another mode is activated.
- **Single-Step Mode**: The turntable rotates at a set angle (e.g., 0.5° or 7.5° for 1/48) and then stops. This action takes effect immediately upon button press.
- **Repeated Step Mode (Intermittent Rotation)**: The turntable alternates between rotating by a set angle (e.g., 11.25° for 1/32 or 45° for 1/8) and pausing for 4 seconds, continuously cycling until manually stopped or another mode is activated.
- **Multi-step Within One Circle Mode**: The turntable rotates by a set angle, pauses, and then repeats the action until it completes a full 360-degree rotation and returns to the starting position. The angle buttons (2, 4, 8, 16, 24, 32, 48, 64, 96) divide 360 degrees into equal steps.
4.3 Setting and Returning to Origin
- **Set Origin**: Manually rotate the turntable to your desired starting position. Press the "Set Origin" button on the remote control. This position is now saved as the origin point.
- **Return to Origin**: At any point during operation, press the "Return to Origin" button. The turntable will automatically rotate back to the previously set origin point.
5. Maintenance
- **Cleaning**: Use a soft, dry cloth to wipe the surface of the turntable. Avoid using abrasive cleaners or solvents that may damage the frosted finish.
- **Storage**: When not in use, store the turntable in a dry, dust-free environment.
- **Power Adapter**: Always use the original power adapter provided with the device.
- **Remote Control Batteries**: Replace batteries in the remote control as needed to ensure proper function.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Turntable does not rotate. | No power, power switch off, remote control batteries low/dead, remote not pointed correctly. | Ensure power adapter is securely plugged in. Turn on the power switch. Replace remote batteries. Point remote directly at the turntable's infrared receiver. |
| Rotation is erratic or stops unexpectedly. | Overload, obstruction, remote signal interference. | Reduce the weight on the turntable (check max load in specifications). Remove any obstructions. Ensure clear line of sight for remote. |
| Remote control not responding. | Low/dead batteries, remote out of range, signal obstruction. | Replace remote batteries. Move closer to the turntable. Remove any objects blocking the signal path. |
| Turntable makes unusual noise. | Overload, internal issue. | Reduce load. If noise persists, discontinue use and contact support. |
7. Specifications
7.1 MT200RLV2-B Model
| Attribute | Value |
|---|---|
| Model Number | MT200RLV2-B |
| Diameter | 20cm / 7.9inch |
| Height | 4.8cm / 1.9inch |
| Power Supply | DC13.3V Power Adapter (0.5A) |
| Rotation Speed | 20-68 seconds per revolution |
| Max Load (Continuous Rotation) | 45kg / 100lbs |
| Max Load (Stepping Angle) | 20kg / 44lbs (Ensures rotation accuracy) |
| Material | ABS |
| Color Options | White/Black |
| Voltage Range | Low voltage non-USB (below 75V DC, below 50V AC) |
7.2 Other Available Models (for reference)
- **MT320RL40V2-W/B**: Diameter 32cm/12.6inch, DC15.5V, 27-72sec/rev, 135kg/300lbs (continuous), 40kg/88lbs (stepping)
- **MT350RL50V2-W/B**: Diameter 35cm/13.8inch, DC15.5V, 28-75sec/rev, 160kg/350lbs (continuous), 45kg/100lbs (stepping)
- **MT400RL60V2-W/B**: Diameter 40cm/15.8inch, DC15.5V, 28-75sec/rev, 180kg/400lbs (continuous), 50kg/110lbs (stepping)
8. User Tips
- **Optimal Remote Use**: For best results, ensure a clear line of sight between the remote control and the turntable's infrared receiver.
- **Weight Distribution**: Always center the item you are displaying on the turntable to ensure smooth and stable rotation, especially for heavier objects.
- **Power-Off Protection**: Utilize the 'Lock' button on the remote to save your preferred settings, preventing accidental changes during operation or after powering off.
- **Experiment with Modes**: Explore the different rotation modes (Continuous, Single-Step, Repeated Step, Multi-step) to find the best presentation for your specific product or application.
9. Warranty and Support
For warranty information and technical support, please refer to the official ComXim website or contact your retailer. Keep your purchase receipt as proof of purchase.
A digital version of this user manual and other related documents may be available for download from the manufacturer's website or via the following link: User Manual (PDF).