YEELIGHT Motion Sensor Cabinet Light Instruction Manual

1. Introduction

The YEELIGHT Motion Sensor Cabinet Light is a versatile and intelligent lighting solution designed for various indoor spaces. Featuring human motion detection and light sensitivity, this rechargeable light bar offers both practical illumination and aesthetic appeal with its unique 'sunset light' effects. Its easy, wire-free installation makes it ideal for cabinets, closets, entryways, and kitchens.

2. Product Overview

Key Features:

• Artistic Design: Small hill-shaped light arc provides clear and soft illumination without secondary glare.
• Smart Dual-Sensor: Combines human motion detection and light sensitivity for automatic operation.
• Multi-Light Effects: Offers 2700K warm light (Casual Mode) and two 'sunset light' effects (Sunset Red, Purple Smoke Blue - Warm Mode).
• Infinitely Adjustable Brightness: Dimmable via touch control.
• Easy Installation: Magnetic paste for quick, wire-free setup.
• Rechargeable: Built-in battery with Type-C charging port.
• Multiple Sizes: Available in 28cm (A28), 42cm (A42), and 60cm (A60) to suit different needs.

Components:

Image: Diagram showing the charging port, button switch, charging indicator, touch function, and magnetic stickers.

• Magnetic Stickers: For easy mounting.
• Charging Port: USB Type-C for recharging the internal battery.
• Button Switch: Short press to switch modes; long press to switch color temperature.
• Charging Indicator: Red light indicates charging; no light indicates fully charged.
• Touch Function: Long press the lamp body while the light is on to adjust brightness.

3. Setup Instructions

1. Charge the Device: Before first use, fully charge the cabinet light using the provided USB Type-C cable. The charging indicator will be red during charging and turn off when fully charged.
2. Choose Installation Location: Select a clean, dry, and flat surface where you want to install the light. Common locations include under cabinets, inside closets, or along entryways.
3. Attach Magnetic Stickers: Peel off the protective film from the magnetic stickers and firmly attach them to the desired installation surface. Ensure the stickers are aligned with the magnetic points on the back of the light bar.
4. Mount the Light: Align the light bar with the attached magnetic stickers on the surface. The magnets will hold the light securely in place. No wiring is required.

Image: Example of the cabinet light installed in an entryway.

Image: Examples of the cabinet light used for kitchen and closet lighting.

4. Operating Instructions

Power On/Off and Mode Selection:

• Short Press Button: Briefly press the button switch to cycle through different operating modes (e.g., Always On, Motion Sensor Mode).
• Motion Sensor Mode: In this mode, the light will automatically turn on when human motion is detected within its range (up to 3 meters, 100-degree angle) in a dark environment. It will automatically turn off after approximately 20 seconds of no motion. The light will not activate in bright environments to save energy.

Image: Diagram illustrating human motion detection and light sensitivity, showing a 3m detection range and 100-degree angle. Note: Sensitivity is affected by ambient temperature, light conditions, and speed of human movement.

Color Temperature Adjustment:

• Long Press Button: Press and hold the button switch to cycle through available color temperatures: 2700K warm light (Casual Mode) and 'sunset light' effects (Warm Mode - Sunset Red, Purple Smoke Blue). Release the button when your desired color is reached.

Image: Comparison of Casual Mode (2700K warm light) and Warm Mode (Sunset light).

Brightness Adjustment:

• Touch Function: While the light is on, long press the lamp body itself to infinitely adjust the brightness. Release when the desired brightness level is achieved.

5. Maintenance

• Cleaning: Wipe the light bar with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the light when the indicator shows low battery. If storing for an extended period, charge the battery to about 50% and recharge every few months.
• Sensor Maintenance: Keep the motion sensor lens clean and free from obstructions to ensure optimal performance.

6. Troubleshooting

Light does not turn on:

• Check if the battery is charged. Recharge if necessary.
• Ensure the light is in the correct operating mode (e.g., Motion Sensor Mode).
• Verify that the environment is dark enough for the motion sensor to activate.
• Check for any obstructions blocking the motion sensor.

Motion sensor is not responsive:

• Ensure the sensor lens is clean.
• Confirm the light is in Motion Sensor Mode.
• Note that sensitivity can be affected by ambient temperature, light conditions, and speed of movement.

Light does not dim or change color temperature:

• For dimming, ensure you are long-pressing the lamp body itself.
• For color temperature, ensure you are long-pressing the button switch.

Charging indicator is not working:

• Ensure the USB cable and power adapter are functioning correctly.
• Check if the charging port is clean and free of debris.
• If the light is already fully charged, the indicator will not be lit.

7. Specifications

8. User Tips

• Optimal Placement: For best motion detection, place the light where movement is most likely to occur within its detection range, and avoid placing it directly facing heat sources or air vents that might cause false triggers.
• Charging Frequency: Depending on usage, you may need to recharge the light every few weeks to a month. Keep a USB-C cable handy for convenience.
• Experiment with Modes: Try both the 2700K warm light and the 'sunset light' modes to see which best suits the ambiance of your space. The dimming feature allows for further customization.
• Magnetic Strength: While the magnetic attachment is strong, for very high-traffic areas or heavy vibrations, occasionally check that the light remains securely attached.

9. Warranty and Support

This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or any questions regarding the product, please contact the retailer or the official Yeelight customer service. Please retain your proof of purchase for warranty purposes.